Contents

Articles in the same Issue

1. Contents
2. Contents
3. Original Contributions
4. The thermodynamics of boron extraction from liquid silicon using SiO₂–CaO–MgO slag treatment
5. Viscosity estimation of semi-solid alloys based on thermal simulation compression tests
6. Original Contributions
7. Experimental study of phase equilibria in the “SnO”–CaO–SiO₂ system in equilibrium with tin metal
8. Prediction of the solidification path of Al-4.37Cu-27.02Mg ternary eutectic alloy with a unified microsegregation model coupled with Thermo-Calc
9. Evaluation of the effective diffusion coefficient of boron in the Fe₂B phase in the presence of chemical stresses
10. Morphology evolution of γ′ precipitates in GTD-111 Ni-based superalloy with heat treatment parameters
11. Hot forming of a new steel used in stamping dies and tooling
12. Mechanical properties and corrosion behaviour of freestanding, precipitate-free magnesium WE43 thin films
13. Sliding wear performance of Fe-, Ni- and Co-based hardfacing alloys for PTA cladding
14. The suitability of selected austenitic stainless steels and hastelloy C276 alloys as substrates for thin film deposition using spray pyrolysis
15. Synthesis, structural, optical and thermal analysis of nanostructured ZnO
16. Electrical conductivity variation of (Bi₂Te₃)_0.25(Sb₂Te₃)_0.75 crystal grown using the zone melting method
17. X-ray Absorption Near Edge Structure Studies of Pb_1-xMn_xTe(In, Ga) Systems
18. DGM News
19. DGM News
20. Grain refining of aluminium alloys and silicon by means of boron-nitride particles