Startseite Synchrotron and neutron laminography for three-dimensional imaging of devices and flat material specimens
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Synchrotron and neutron laminography for three-dimensional imaging of devices and flat material specimens

  • Lukas Helfen , Thilo F. Morgeneyer , Feng Xu , Mark N. Mavrogordato , Ian Sinclair , Burkhard Schillinger und Tilo Baumbach
Veröffentlicht/Copyright: 31. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 103 Heft 2

Abstract

Computed laminography has been introduced to synchrotron and neutron imaging set-ups to complement computed tomography for three-dimensional imaging of laterally extended (i. e. plate-like) specimens. The wide application field of computed laminography due to different contrast modes (X-ray or neutron absorption and X-ray phase contrast) and spatial resolutions ranging from some 100 down to approximately 0.5 μm is demonstrated. Selected examples from device inspection and from materials science are reported. They outline the interest of the method for non-destructive and in-situ measurements of regions of interest in large planar specimens where engineering-relevant boundary conditions have to be met. With a materials science background, the in-situ investigation of crack propagation in aluminium sheets and carbon-fibre composite panels under mechanical loading is reported.

Keywords: Laminography; Tomosynthesis; Engineering alloys; Carbon fibre composites; Damage
* Correspondence address Dr. Lukas Helfen, ISS/ANKA, Karlsruhe Institute of Technology, Herrmann-von-Helmholtz-Platz 1D-76344 Eggenstein-Leopoldshafen, Germany, Tel.: +33 476 88 25 58, Fax: +33 476 88 22 52, E-mail:

References

[1] Advanced Tomographic Methods in Materials Research and Engineering, J.Banhart (Ed.), Oxford University Press, New York (2008).10.1093/acprof:oso/9780199213245.001.0001Suche in Google Scholar

[2] L.HelfenT.Baumbach, P.Mikulík, D.Kiel, P.Pernot, P.Cloetens, J.Baruchel: Appl. Phys. Lett.86 (2005) 071915.10.1063/1.1854735Suche in Google Scholar

[3] L.Helfen, A.Myagotin, P.Pernot, M.DiMichiel, P.Mikulík, A.Berthold, T.Baumbach: Nucl. Instrum. Meth. Phys. Res. A563 (2006) 163. 18097079; 10.1016/j.nima.2006.01.08510.1016/j.nima.2006.01.085Suche in Google Scholar

[4] L.Helfen, A.Myagotin, A.Rack, P.Pernot, P.Mikulík, M.DiMichiel, T.Baumbach: Phys. Stat. Sol. A204 (2007) 2760.10.1002/pssa.200775676Suche in Google Scholar

[5] K.Krug, L.Porra, P.Coan, G.Tauber, A.Wallert, J.Dik, A.Coerdt, A.Bravin, M.Elyyan, L.Helfen, T.Baumbach: J. Synchr. Rad.15 (2008) 55. 10.1107/S090904950704543810.1107/S0909049507045438Suche in Google Scholar PubMed

[6] J.Dik, P.Reischig, K.Krug, A.Wallert, A.Coerdt, L.Helfen, T.Baumbach: J. Am. Inst. Conserv.48 (2009) 185.10.1179/019713612804514260Suche in Google Scholar

[7] A.Houssaye, F.Xu, L.Helfen, V.de Buffrénil, T.Baumbach, P.Tafforeau: J. Vertebr. Paleontol.31 (2011) 2. 10.1080/02724634.2011.53965010.1080/02724634.2011.539650Suche in Google Scholar

[8] L.Helfen, F.Xu, B.Schillinger, E.Calzada, I.Zanette, T.Weitkamp, T.Baumbach: Nucl. Instrum. Meth. Phys. Res. A651 (2011) 135–139. 10.1016/j.nima.2011.01.11410.1016/j.nima.2011.01.114Suche in Google Scholar

[9] L.Helfen, T.Baumbach, P.Cloetens, J.Baruchel: Appl. Phys. Lett.94 (2009) 104103. 10.1063/1.308923710.1063/1.3089237Suche in Google Scholar

[10] F.Xu, L.Helfen, A.J.Moffat, G.Johnson, I.Sinclair, T.Baumbach: J. Synchr. Radiat.17 (2010) 222. 10.1107/S090904951000151210.1107/S0909049510001512Suche in Google Scholar PubMed PubMed Central

[11] M.-V.Uz, M.Koçak, F.Lemaitre, J.-C.Ehrstrom, S.Kemp, F.Bron: Int. J. Fatigue31 (2009) 916–926. 10.1016/j.ijfatigue.2008.10.00310.1016/j.ijfatigue.2008.10.003Suche in Google Scholar

[12] L.Helfen, A.Myagotin, P.Mikulík, P.Pernot, A.Voropaev, M.Elyyan, M.DiMichiel, J.Baruchel, T.Baumbach: Rev. Sci. Instrum.82 (2011) 063702. 10.1063/1.359656610.1063/1.3596566Suche in Google Scholar PubMed

[13] F.Xu, L.Helfen, T.Baumbach, H.Suhonen: “Comparison of image quality in computed laminography and tomography”, manuscript submitted.Suche in Google Scholar

[14] L.Helfen, T.Baumbach, P.Pernot, P.Mikulík, M.DiMichiel, J.Baruchel: Proc. SPIE6318 (2006), 63180N. 10.1117/12.68079710.1117/12.680797Suche in Google Scholar

[15] A.Myagotin, A.Voropaev, L.Helfen, D.Hänschke, T.Baumbach: Fast volume reconstruction for parallel-beam computed laminography by filtered backprojection, manuscript submitted.Suche in Google Scholar

[16] L.Helfen, V.Altapova, D.Hänschke, A.Homs Puron, J.-P.Valade, M.Nicola, M.Schneider, J.Baruchel, T.Baumbach: “ANKA's absorption and phase-contrast laminography instrument at ESRF beamline ID19”, manuscript in preparation.Suche in Google Scholar

[17] T.Weitkamp, P.Tafforeau, E.Boller, P.Cloetens, J.-P.Valade, P.Bernard, F.Peyrin, W.Ludwig, L.Helfen, J.Baruchel: AIP Conference Proceedings 1221 (2010) 33. 10.1063/1.339925310.1063/1.3399253Suche in Google Scholar

[18] B.Schillinger, E.Calzada, K.Lorenz: Solid State Phenomena112 (2006) 61. 10.4028/www.scientific.net/SSP.112.61Suche in Google Scholar

[19] A.J.Moffat, P.Wright, L.Helfen, T.Baumbach, G.Johnson, S.M.Spearing, I.Sinclair: Scripta Mater.62 (2010) 97. 10.1016/j.scriptamat.2009.09.02710.1016/j.scriptamat.2009.09.027Suche in Google Scholar

[20] T.F.Morgeneyer, L.Helfen, I.Sinclair, H.Proudhon, F.Xu, T.Baumbach: Scripta Mater.65 (2011) 1010–1013. 10.1016/j.scriptamat.2011.09.00510.1016/j.scriptamat.2011.09.005Suche in Google Scholar

[21] T.Tian, F.Xu, J.K.Han, D.Choi, Y.Cheng, L.Helfen, M.DiMichiel, T.Baumbach, K.N.Tu: Appl. Phys. Lett.99 (2011) 082114. 10.1063/1.362834210.1063/1.3628342Suche in Google Scholar

[22] C.Q.Chen, J.F.Knott: Met. Sci.15 (1981) 357.Suche in Google Scholar

[23] D.Dumont, A.Deschamps, Y.Bréchet, C.Sigli, J.C.Ehrström: Mater. Sci. Techn.20 (2004) 1. 10.1179/02670830422501666210.1179/026708304225016662Suche in Google Scholar

[24] U.Zerbst, M.Heinimann, C.Dalle Donne, D.Steglich: Eng. Frac. Mech.76 (2009) 5. 10.1016/j.engfracmech.2007.10.00510.1016/j.engfracmech.2007.10.005Suche in Google Scholar

[25] T.F.Morgeneyer, M.J.Starink, I.Sinclair: Acta Mater.56 (2008) 1671. 10.1016/j.actamat.2007.12.01910.1016/j.actamat.2007.12.019Suche in Google Scholar

[26] T.F.Morgeneyer, M.J.Starink, S.C.Wang, I.Sinclair: Acta Mater.56 (2008) 2872. 10.1016/j.actamat.2008.02.02110.1016/j.actamat.2008.02.021Suche in Google Scholar

[27] T.F.Morgeneyer, J.Besson, H.Proudhon, M.J.Starink, I.Sinclair: Acta Mater.57 (2009) 3902. 10.1016/j.actamat.2009.04.04610.1016/j.actamat.2009.04.046Suche in Google Scholar

[28] H.Toda, E.Maire, S.Yamauchi, H.Tsuruta, T.Hiramatsu, M.Kobayashi: Acta Mater.59 (2011) 1995. 10.1016/j.actamat.2010.11.06510.1016/j.actamat.2010.11.065Suche in Google Scholar

[29] H.Suhonen, F.Xu, L.Helfen, C.Ferrero, P.Vladimirov, P.Cloetens: “X-ray phase contrast and fluorescence nanotomography for material studies”, Int. J. Mater. Res., 103 (2012) 179. 10.3139/146.110664Suche in Google Scholar

Received: 2011-8-1
Accepted: 2011-11-10
Published Online: 2013-05-31
Published in Print: 2012-02-01

© 2012, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Exploiting Contrast with Tomography
  5. Original Contributions
  6. 3D imaging of complex materials: the case of cement
  7. Neutron Bragg-edge mapping of weld seams
  8. 3D image analysis and stochastic modelling of open foams
  9. In-situ X-ray microtomography study of the movement of a granular material within a die
  10. Synchrotron and neutron laminography for three-dimensional imaging of devices and flat material specimens
  11. Numerical correction of X-ray detector backlighting
  12. X-ray phase contrast and fluorescence nanotomography for material studies
  13. Estimation of the probability of finite percolation in porous microstructures from tomographic images
  14. Imaging of grain-level orientation and strain in thicker metallic polycrystals by high energy transmission micro-beam Laue (HETL) diffraction techniques
  15. Three-dimensional morphology and mechanics of bone scaffolds fabricated by rapid prototyping
  16. Fatigue induced deformation of taper connections in dental titanium implants
  17. Beyond imaging: on the quantitative analysis of tomographic volume data
  18. Damage fluctuations in creep deformed copper studied with synchrotron X-ray microtomography
  19. Neutron strain tomography using Bragg-edge transmission
  20. Three-dimensional registration of tomography data for quantification in biomaterials science
  21. Morpho-topological volume analysis of porous materials for nuclear applications
  22. People
  23. Professor Dr. rer. nat. Richard Wagner
  24. DGM News
  25. DGM News
https://doi.org/10.3139/146.110668
Schlagwörter für diesen Artikel
Laminography; Tomosynthesis; Engineering alloys; Carbon fibre composites; Damage

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Exploiting Contrast with Tomography
  5. Original Contributions
  6. 3D imaging of complex materials: the case of cement
  7. Neutron Bragg-edge mapping of weld seams
  8. 3D image analysis and stochastic modelling of open foams
  9. In-situ X-ray microtomography study of the movement of a granular material within a die
  10. Synchrotron and neutron laminography for three-dimensional imaging of devices and flat material specimens
  11. Numerical correction of X-ray detector backlighting
  12. X-ray phase contrast and fluorescence nanotomography for material studies
  13. Estimation of the probability of finite percolation in porous microstructures from tomographic images
  14. Imaging of grain-level orientation and strain in thicker metallic polycrystals by high energy transmission micro-beam Laue (HETL) diffraction techniques
  15. Three-dimensional morphology and mechanics of bone scaffolds fabricated by rapid prototyping
  16. Fatigue induced deformation of taper connections in dental titanium implants
  17. Beyond imaging: on the quantitative analysis of tomographic volume data
  18. Damage fluctuations in creep deformed copper studied with synchrotron X-ray microtomography
  19. Neutron strain tomography using Bragg-edge transmission
  20. Three-dimensional registration of tomography data for quantification in biomaterials science
  21. Morpho-topological volume analysis of porous materials for nuclear applications
  22. People
  23. Professor Dr. rer. nat. Richard Wagner
  24. DGM News
  25. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 16.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110668/html?lang=de
Button zum nach oben scrollen