Startseite A micro-level strain analysis of a high-strength dual-phase steel
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

A micro-level strain analysis of a high-strength dual-phase steel

  • Marianne Kapp , Thomas Hebesberger und Otmar Kolednik
Veröffentlicht/Copyright: 11. Juni 2013
Veröffentlichen auch Sie bei De Gruyter Brill

Abstract

The deformation behaviour of a dual-phase steel with a tensile strength of about 1 000 MPa is investigated at the micro level. In-plane strains are determined by means of in-situ tensile tests in the scanning electron microscope and automatic local deformation analysis (based on digital image correlation). Maps of strain at high and low magnification reveal the network-like formation of deformation bands. In detailed high resolution analyses the sites of highest strain (“hot spots”) are identified. Observations in metallographic cross-sections indicate that these hot spots are frequently the origin of damage initiation.


* Correspondence address, Ms. Marianne Kapp Jahnstraße 12, 8700 Leoben, Austria Tel.: +43 3842 804 309 Fax: +43 3842 804 116 E-mail:

Dedicated to Prof. F. D. Fischer on the occasion of his 70thbirthday


References

[1] M.F.Ashby: Phil Mag.21 (1970) 399.10.1016/0079-6107(70)90029-5Suche in Google Scholar

[2] H.Fischmeister, B.Karlsson: Int. Mat. Res.68 (1977) 311.Suche in Google Scholar

[3] S.T.Mileiko: J. Mater. Sci.4 (1969) 974.10.1007/BF00555312Suche in Google Scholar

[4] P.Uggowitzer, H.P.Stüwe: Int. Mat. Res.73 (1982) 277.Suche in Google Scholar

[5] A.Karelova, C.Krempaszky, E.Werner, P.Tsipouridis, T.Hebesberger, A.Pichler: steel research int.80 (2009) 71.Suche in Google Scholar

[6] A.Hudgins, D.Matlock, J.Speer, J.Fekete, M.Walp: Proc. MS&T 2007 Iron&Steel Society and TMS, 16–20 Sept. 2007, Detroit, MI, USA, 2007 145.Suche in Google Scholar

[7] M.Sarwar, E.Ahmad, N.Hussain, B.Ahmad, T.Manzoor: J. Mat. Eng. Perf. 152005352.10.1361/105994906X108684Suche in Google Scholar

[8] G.Avramovic-Cingara, Y.Osokov, M.K.Jain, D.S.Wilkinson: Mater. Sci. Eng. A516 (2009) 7.10.1016/j.msea.2009.03.055Suche in Google Scholar

[9] X.Sun, K.S.Choi, W.N.Liu, M.A.Khaleel: Int. J. Plast.25 (2009) 1888.10.1016/j.ijplas.2008.12.012Suche in Google Scholar

[10] C.Krempazky, V.Espinoza, J.Ocenasek, E.Werner, T.Hebesberger, A.Pichler: Proc. MS&T 2007 Iron&Steel Society and TMS, 16–20 Sept. 2007, Detroit, MI, USA, 2007 31–43.Suche in Google Scholar

[11] V.Uthaisangsuk, U.Prahl, W.Bleck: Eng. Fract. Mech. in press.Suche in Google Scholar

[12] A.Tatschl, O.Kolednik: Mater. Sci. Eng. A339 (2003) 265.10.1016/S0921-5093(02)00111-9Suche in Google Scholar

[13] A.Tatschl, O.Kolednik: Mater. Sci. Eng. A342 (2003) 152.10.1016/S0921-5093(02)00278-2Suche in Google Scholar

[14] J.Kang, M.Jain, D.S.Wilkinson, J.D.Embury: J. Strain An.40 (40) (2005).10.1243/030932405X16151Suche in Google Scholar

[15] J.Kang, Y.Ososkov, J.D.Embury, D.S.Wilkinson: Scripta Mater.56 (2007) 999.10.1016/j.scriptamat.2007.01.031Suche in Google Scholar

[16] Y.Ososkov, D.S.Wilkinson, M.Jain, T.Simpson: Int. Mat. Res.98 (2007) 8.Suche in Google Scholar

[17] C.C.Tasan, J.P.M.Hoefnagels, M.G.D.Geers: Scripta Mater.62 (2010) 835.10.1016/j.scriptamat.2010.02.014Suche in Google Scholar

[18] H.Ghadbeigi, C.Pinna, S.Celotto, J.R.Yates: Mater. Sci. Eng A527 (2010) 5026.10.1016/j.msea.2010.04.052Suche in Google Scholar

[19] K.Unterweger, O.Kolednik: Int. Mat. Res.96 (2005) 9.Suche in Google Scholar

[20] O.Kolednik, K.Unterweger: Eng. Frac. Mech.75 (2008) 3663.10.1016/j.engfracmech.2007.08.011Suche in Google Scholar

Received: 2010-12-23
Accepted: 2011-4-6
Published Online: 2013-06-11
Published in Print: 2011-06-01

© 2011, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Original Contributions
  2. Microstructure and adhesion of as-deposited and annealed Cu/Ti films on polyimide
  3. On the origin of inhomogeneous stress and strain distributions in single-crystalline metallic nanoparticles
  4. Contents
  5. Contents
  6. Editorial
  7. Editorial June 2011
  8. IJMR's most downloaded papers
  9. Original Contributions
  10. An excursion into the design space of biomimetic architectured biphasic actuators
  11. Strategies for fracture toughness, strength and reliability optimisation of ceramic-ceramic laminates
  12. Fracture statistics of brittle materials at micro- and nano-scales
  13. Martensitic phase transformations of nanocrystalline NiTi shape memory alloys processed by repeated cold rolling
  14. Variational modeling of shape memory alloys – an overview
  15. Phase-field approach to martensitic phase transformations: Effect of martensite–martensite interface energy
  16. Modelling of diffusive and massive phase transformations in binary systems – thick interface parametric model
  17. On the strength of grain and phase boundaries in ferritic-martensitic dual-phase steels
  18. A micro-level strain analysis of a high-strength dual-phase steel
  19. Thermodynamic description of niobium-rich γ-TiAl alloys
  20. Phase transition and ordering behavior of ternary Ti–Al–Mo alloys using in-situ neutron diffraction
  21. Microstructure evolution and mechanical properties of an intermetallic Ti-43.5Al-4Nb-1Mo-0.1B alloy after ageing below the eutectoid temperature
  22. Investigation of Cu precipitation in bcc-Fe – Comparison of numerical analysis with experiment
  23. Modeling interfacial effects on the thermal conduction behavior of short fiber reinforced composites
  24. Electronic origin of structure and mechanical properties in Y and Nb alloyed Ti–Al–N thin films
  25. DGM News
  26. DGM News
Heruntergeladen am 27.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110522/html?lang=de
Button zum nach oben scrollen