Startseite Nucleation and growth during primary recrystallization of certain metals and alloys with a face-centered cubic structure: Formation of the cube texture
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Nucleation and growth during primary recrystallization of certain metals and alloys with a face-centered cubic structure: Formation of the cube texture

  • Richard Penelle
Veröffentlicht/Copyright: 11. Juni 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 100 Heft 10

Abstract

After reviewing the seminal results of the work of Charles Crussard in the field of metal recrystallization, the remainder of this overview will be devoted to the origin and development of cube texture in the Fe-36 %Ni alloy. For this purpose, the macrotexture was characterized via X-ray and neutron diffraction. The microtexture and microstructure were analyzed using electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM), respectively. The deformation energy stored by the dislocations (the driving force for recrystallization) was calculated based on the measurement of the broadening of the neutron diffraction peaks. After cold-rolling, the cube grains store less deformation energy than the aggregate of grains having other orientations and also exhibit a cellular microstructure. These two parameters account to a large extent for the formation and rapid growth of cube nuclei.

Keywords: Nucleation; Subgrain growth; Cube recrystallization texture; Aluminum; Invar
* Correspondence address, Prof. Richard Penelle Université de Paris Sud 11 ICMMO-LPCES Bâtiment 410 F-91405 Orsay Cedex, France E-mail:

Dedicated to the late Prof. Charles Crussard (1916–2008)

References

[1] W.G.Burgers, P.C.Louwerse: Z. Physik61 (1931) 605.Suche in Google Scholar

[2] W.G.Burgers, in R.Stoops (Ed.), l'Etat Solide, rapports et discussions, Institut International Solvay, 9ème Conseil de Physique, Université Libre de Bruxelles, 25–29 septembre 1951 (1952) 73.Suche in Google Scholar

[3] C.S.Barrett: Trans. AIME137 (1940) 128.Suche in Google Scholar

[4] P.A.Beck, H.Hu: J. Metals (Trans)1 (1949) 627.Suche in Google Scholar

[5] P.A.Beck, H.Hu: J. Metals (Trans)2 (1950) 1215.Suche in Google Scholar

[6] P.A.Beck: Acta Met1 (1953) 253.10.1016/0001-6160(53)90124-2Suche in Google Scholar

[7] P.A.Beck, H.Hu, in: Recrystallisation, Grain Growth and Texture ASM Metals Park Ohio (1966) 393.Suche in Google Scholar

[8] C.Crussard, F.Aubertin, B.Jaoul, G.Wyon: Progress in Metal Physics (Ed.) Butterworths2 (1950) 193.Suche in Google Scholar

[9] C.Crussard: Semaine d'étude de la physique des métaux. Formation du grain dans les métaux par recristallisation. CNAM Paris Editions Métaux (1952) 1.Suche in Google Scholar

[10] A.Guinier: Semaine d'étude de la physique des métaux. Formation du grain dans les métaux par recristallisation. CNAM Paris Editions Métaux (1952) 29.Suche in Google Scholar

[11] P.Lacombe: Semaine d'étude de la physique des métaux. Formation du grain dans les métaux par recristallisation. CNAM Paris Editions Métaux (1952) 39.Suche in Google Scholar

[12] J.Herenguel: Semaine d'étude de la physique des métaux. Formation du grain dans les métaux par recristallisation. CNAM Paris Editions Métaux (1952) 71.Suche in Google Scholar

[13] J.A.Venables, C.J.Harland: Phil. Mag.2 (1973) 1193.10.1080/14786437308225827Suche in Google Scholar

[14] J.A.Venables, A.Bin-Jaya: Phil. Mag.35 (1977) 1317.10.1080/14786437708232955Suche in Google Scholar

[15] D.J.Dingley: Scanning Electron Micro. IV (1981) 272.Suche in Google Scholar

[16] D.J.Dingley: Proc. Royal Mic. Society19 (1984) 74.Suche in Google Scholar

[17] R.Penelle, T.Baudin, P.Paillard, L.Mora: ICOTOM 9 Avignon 17–21 Septembre 1990, Textures and Microstructures 14–18 (1991) 597.Suche in Google Scholar

[18] R.J.Roe, W.R.Krigbaum: J. Chem. Phys.40 (1964) 2608.10.1063/1.1725571Suche in Google Scholar

[19] R.J.Roe: J. Appl. Phys.36 (1965) 2024.10.1063/1.1714396Suche in Google Scholar

[20] R.J.Roe: J. Appl. Phys.37 (1966) 2069.10.1063/1.1708672Suche in Google Scholar

[21] H.J.Bunge: Texture Analysis in Materials Science, Butterworths (1982).10.1016/B978-0-408-10642-9.50010-6Suche in Google Scholar

[22] C.Masson, P.Parnière, R.Penelle, P.Lacombe: Mémoires Scientifiques de la Revue de Métallurgie4 (1973) 271.Suche in Google Scholar

[23] H.J.Bunge, C.Esling: C.R. Acad. Sc. B289 (1979) 163.Suche in Google Scholar

[24] H.J.Bunge, C.Esling, C.Muller: J. Appl. Crystallographica13 (1980) 544.10.1107/S0021889880012757Suche in Google Scholar

[25] H.J.Bunge, C.Esling, J.Muller: Acta Crystallographica A37 (1981) 889.10.1107/S0567739481001915Suche in Google Scholar

[26] H.J.Bunge, C.Esling: J. Appl. Crystallograhica14 (1981) 253.10.1107/S0021889881009308Suche in Google Scholar

[27] T.Baudin, R.Penelle: Metallurgical Transaction A Physical Metallurgy and Materials Science24 (1993) 2299.Suche in Google Scholar

[28] F.Caleyo, T.Baudin, R.Penelle: European Physical Journal-Applied Physics35 (2001) 85.10.1051/epjap:2001170Suche in Google Scholar

[29] R.W.Cahn, in: R.W.Cahn (Ed), Physical Metallurgy, North Holland Publishing (1970) 1129.Suche in Google Scholar

[30] F.Haessner (Ed): Recrystallization of Metallic Materials, Riederer-Verlag GmbH, Stuttgart (1978).Suche in Google Scholar

[31] S.P.Bellier, R.D.Doherty: Acta Met.25 (1977) 310.10.1016/0001-6160(77)90192-4Suche in Google Scholar

[32] R.D.Doherty, G.Gottstein, J.Hirsch, W.B.Hutchinson, K.Lucke, E.Nes, P.J.Wilbrandt, Report of panel discussion on recrystallization: mechanisms and experiments, in: J.S. Kallend, G. Gottstein (Ed.), Proceedings of ICOTOM 8, The Metallurgical Society, Santa Fe, NM, U.S.A., September 20–25 (1987) 563.Suche in Google Scholar

[33] R.D.Doherty, I.Samajdar, C.T.Necker, H.E.Vatne, E.Nes, in: Proceedings of the 16th Riso International Conference on Materials Science: Microstructural and Crystallographic Aspects of Recrystallization, Roskilde, Denmark (1995) 1.Suche in Google Scholar

[34] R.D.Doherty, D.A.Hughes, F.J.Humphreys, J.J.Jonas, D.J.Jensen, M.E.Kassner, W.E.King, H.J.McQueen, A.D.Rollett, Current issues in recrystallization: A review, Mat. Sci., Eng. A238 (1997) 219.10.1016/S0921-5093(97)00424-3Suche in Google Scholar

[35] A.Samet-Meziou, A.L.Etter, T.Baudin, R.Penelle: Materials Science and Engineering: A473 (2008) 342.10.1016/j.msea.2007.03.090Suche in Google Scholar

[36] H.Hu, in: Himmel, Interscience Publishers, a division of J. Wiley & Sons (Ed.), Proceedings of the “Recovery and Recrystallization of Metals” Symposium, New York, February 20–21, 1962, AIME Metallurgical Society (1963) 311.Suche in Google Scholar

[37] J.L.Walter, E.F.Koch: Acta Met.11 (1963) 923.10.1016/0001-6160(63)90062-2Suche in Google Scholar

[38] J.L.Walter, E.F.Koch: Acta Met.11 (1963) 999.10.1016/0001-6160(63)90076-2Suche in Google Scholar

[39] P.A.Beck, P.R.Sperry: J. Appl. Phys.21 (1950) 150.10.1063/1.1699614Suche in Google Scholar

[40] S.B.Bellier, R.D.Doherty: Acta Met.25 (1977) 521.10.1016/0001-6160(77)90192-4Suche in Google Scholar

[41] J.E.Bailey, P.B.Hirsch: Proc. Roy. Soc. A267 (1962) 11.10.1098/rspa.1962.0080Suche in Google Scholar

[42] P.A.Beck: Adv. Phys.3 (1954) 245.10.1080/00018735400101203Suche in Google Scholar

[43] I.L.Dillamore, P.L.Morris, C.J.E.Smith, W.B.Hutchinson: Proc. Roy. Soc. A329 (1972) 405.10.1098/rspa.1972.0120Suche in Google Scholar

[44] B.Liebmann, K.LückeG.Masing: Z. Metallkunde47 (1956) 57.Suche in Google Scholar

[45] G.Ibe, W.Dietz, A.C.Fraker, K.Lücke: Z. Metallkunde61 (1970) 498.Suche in Google Scholar

[46] G.Gottstein in: G. Gottstein, K. Lücke (Ed.), Proceedings of ICOTOM 5, March 28–31, 1978, Aachen, Germany, Springer-Verlag (1978) 93.Suche in Google Scholar

[47] J.W.Rutter, K.T.Aust: Acta Met.6 (1958) 375.10.1016/0001-6160(58)90076-2Suche in Google Scholar

[48] K.Aust, J.W.Rutter: Trans. Met. Soc. AIME215 (1959) 119.Suche in Google Scholar

[49] K.Aust, J.W.Rutter: Trans. Met. Soc. AIME218 (1960) 50.Suche in Google Scholar

[50] K.Aust, in: J. Grewen, G. Wassermann (Ed.), Proceedings of Textures in Research and Practice, Clausthal-Zellerfeld, October 2–5, 1968, Springer-Verlag (1969) 160.Suche in Google Scholar

[51] Y.Meyzaud, P.Parnière: Mémoires Scientifiques Rev. MétallurgieLXX1 (7, 8) (1974) 423.Suche in Google Scholar

[52] N.Rouag, R.Penelle: Textures and Microstructures11 (1999) 203.Suche in Google Scholar

[53] J.Grewen, A.Segmüller, G.Wassermann: Arch. Eisenhüttenw.29 (1958) 114.Suche in Google Scholar

[54] J.Grewen: Z. Metallkunde59 (1968) 236.10.1515/ijmr-1968-590319Suche in Google Scholar

[55] R.D.Doherty: Scripta Metall.19 (1985) 927.10.1016/0036-9748(85)90284-4Suche in Google Scholar

[56] A.Merlini, P.A.Beck: Acta metal.1 (1953) 598.Suche in Google Scholar

[57] H.Hu, in: Annealing Processes-Recovery, Recrystallization and Grain Growth, Proceedings of the 7th Riso International Symposium on Metallurgy and Materials Science, September 8–12 (1986) 75.Suche in Google Scholar

[58] W.B.Hutchinson, E.Nes, in: Annealing Processes-Recovery, Recrystallization and Grain Growth, Proceedings of the 7th Riso International Symposium on Metallurgy and Materials Science, September 8–12 (1986) 107.Suche in Google Scholar

[59] J.Hirsch, K.Lücke, in: Annealing Processes-Recovery, Recrystallization and Grain Growth, Proceedings of the 7th Riso International Symposium on Metallurgy and Materials Science, September 8–12 (1986) 349.Suche in Google Scholar

[60] B.J.Duggan, K.Lücke, G.Köhlhoff, C.S.Lee: Acta metall. Mater.41 (1993) 1921.10.1016/0956-7151(93)90211-ASuche in Google Scholar

[61] I.L.Dillamore, H.Katoh: Metal Science8 (1974) 73.10.1007/BF00728561Suche in Google Scholar

[62] R.Penelle, in: F. Moussy, P. Franciosi (Ed.) Physique et Mécanique de la Mise en Forme des Métaux, Ecole d'été d'Oléron 1987, Presses du CNRS-IRSID (1987) 156.Suche in Google Scholar

[63] F.R.Boutin: Péchiney patent C 22 f 1/00//H 01 g 13/00.Suche in Google Scholar

[64] H.Inagaki, A.Umezawa, in: Paul Van Houtte and Leo Kestens (Ed.), Textures of Materials, ICOTOM 14, Leuven, Belgium, July 11–15, 2005, Materials Science Forum, 495–497 (2005) 1273.Suche in Google Scholar

[65] A.Umezawa, H.Inagaki: Z. für Metallkunde97 (2006) 39.Suche in Google Scholar

[66] A.Umezawa, H.Inagaki: Z. für Metallkunde97 (2006) 49.Suche in Google Scholar

[67] R.Penelle and T.Baudin, in: G.Béranger, F.Duffaut, J.Morlet, J.F.Tiers (Ed.), Iron and Nickel Alloys, Lavoisier, Techniques et Documentation (1996) 197.Suche in Google Scholar

[68] P.P.Bhattacharjee, R.K.Ray, A.Upadhyaya: Materials Science and Engineering A488 (2008) 72.10.1016/j.msea.2007.10.065Suche in Google Scholar

[69] R.K.Ray, P.P.Bhattacharjee: Philosophical-Magazine87 (2007) 2417.10.1080/14786430701216269Suche in Google Scholar

[70] S.Zaefferer, T.Baudin, R.Penelle, in: T.R. McNelley (Ed), Proceedings of ReX'96, October 21–24, 1996, Monterey California, U.S.A. (1997) 347.Suche in Google Scholar

[71] S.Zaefferer, T.Baudin, R.Baudin: Acta mater.49 (2001) 1105.10.1016/S1359-6454(00)00387-6Suche in Google Scholar

[72] F.Julliard: Etude des mécanismes de recristallisation dans l'Invar, alliage Fe-36%Ni, Ph.D. thesis, Université de Paris Sud 11 (2001).Suche in Google Scholar

[73] F.Julliard, T.Baudin, R.Penelle, in: J.A. Szpunar (Ed), Proceedings of ICOTOM 12, Montreal, Canada August 9–13, 1999, NRC-CNRC (1999) 973.Suche in Google Scholar

[74] V.Branger, M.H.Mathon, T.Baudin, R.Penelle, in: N. Hansen, X. Huang, D. Juul Jensen, E.M. Lauridsen, T. Leffers, W. Pantleon, T.J. Sabin and J.A. Wert (Ed), Proceedings of the 21st Risoe International Symposium on Materials Science: Recrystallization-Fundamental Aspects and Relations to Deformation Microstructure, Riso National Laboratory, Roskilde, Denmark (2000) 257.Suche in Google Scholar

[75] A.L.Etter, M.H.Mathon, T.Baudin, V.Branger, R.Penelle: Scripta Mater.46 (46) (2002) 311.10.1016/S1359-6462(01)01245-3Suche in Google Scholar

[76] A.L.Etter: Contribution à la compréhension des mécanismes de recristallisation statique et dynamique dans les matériaux métalliques, Habilitation à diriger des recherché, Université de Paris Sud11 (2007).Suche in Google Scholar

[77] I.L.Dillamore, C.J.E.Smith, T.W.Watson: Metal Science Journal1 (1967) 49.Suche in Google Scholar

[78] W.T.Read, W.Shockley: Phys. Rev. (1950) 275.10.1103/PhysRev.78.275Suche in Google Scholar

[79] C.G.Dunn, F.Lionetti: AIME Trans.185 (1949) 125.Suche in Google Scholar

[80] C.G.Dunn, F.W.Daniels, M.J.Bolton: AIME Trans.188 (1950) 368.Suche in Google Scholar

[81] C.G.Dunn, F.W.Daniels, M.J.Bolton: AIME Trans.188 (1950) 1245.Suche in Google Scholar

[82] A.A.Riddha, W.B.Hutchinson: Acta Metallurgica et Materialia30 (1982) 1929.Suche in Google Scholar

[83] V.Branger, M.H.Mathon, T.Baudin, R.Penelle, Scripta Mater.43 (2000) 325.10.1016/S1359-6462(00)00412-7Suche in Google Scholar

[84] F.J.Humphreys, M.Hatherly: Recrystallization and related annealing phenomena, Elsevier (2004).10.1016/B978-008044164-1/50016-5Suche in Google Scholar

[85] T.Baudin, F.Julliard, R.Penelle: Revue de Métallurgie2 (2003) 193.Suche in Google Scholar

[86] J.Hjelen, R.Orsund, E.Nes: Acta metal. mater.2 (1991) 1377.Suche in Google Scholar

Received: 2008-11-27
Accepted: 2009-8-17
Published Online: 2013-06-11
Published in Print: 2009-10-01

© 2009, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Introduction
  4. Introduction
  5. G. Petzow: Laudation for Peter Paul Schepp
  6. Dr. Schepp's retirement after 20 years of service was celebrated
  7. Preface to Feature Articles
  8. “SURFACE and INTERFACE ENGINEERING”
  9. Feature
  10. Thermodynamics of reactions and phase transformations at interfaces and surfaces
  11. Oxidation of palladium: from single crystal surfaces towards nanoparticles
  12. On the high-temperature oxidation of MCrAlY coatings
  13. Conducting polymers for corrosion protection: a review
  14. Fundamental and applied aspects of laser surface engineering
  15. Low-temperature gaseous surface hardening of stainless steel: the current status
  16. Foreword
  17. Foreword
  18. Editorial
  19. The scientific work of Charles Crussard (1916–2008)
  20. Review
  21. Charles Crussard's early contributions: Recrystallization in situ and a Grain Boundary study with J. Friedel and B. Cullity
  22. Magnetohydrodynamics applied to materials processing
  23. Charles Crussard's contribution to sheet metal forming and participation in IDDRG
  24. Glide of dislocations in non-octahedral planes of fcc metals: a review
  25. The deformation stage II of face-centered cubic crystals: Fifty years of investigations
  26. Nucleation and growth during primary recrystallization of certain metals and alloys with a face-centered cubic structure: Formation of the cube texture
  27. Basic
  28. Andrade creep revisited
  29. Application of cluster dynamics modeling to the precipitation in aluminum alloys
  30. On the effect of pre-recovery on subsequent recrystallization
  31. The interplay between grain boundaries and disclinations in condensed matter physics
  32. Plasticity of nanocrystalline materials: a critical viewpoint
  33. Thermoelectric power applied to metallurgy: principle and recent applications
  34. Notifications
  35. People
https://doi.org/10.3139/146.110195
Schlagwörter für diesen Artikel
Nucleation; Subgrain growth; Cube recrystallization texture; Aluminum; Invar

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Introduction
  4. Introduction
  5. G. Petzow: Laudation for Peter Paul Schepp
  6. Dr. Schepp's retirement after 20 years of service was celebrated
  7. Preface to Feature Articles
  8. “SURFACE and INTERFACE ENGINEERING”
  9. Feature
  10. Thermodynamics of reactions and phase transformations at interfaces and surfaces
  11. Oxidation of palladium: from single crystal surfaces towards nanoparticles
  12. On the high-temperature oxidation of MCrAlY coatings
  13. Conducting polymers for corrosion protection: a review
  14. Fundamental and applied aspects of laser surface engineering
  15. Low-temperature gaseous surface hardening of stainless steel: the current status
  16. Foreword
  17. Foreword
  18. Editorial
  19. The scientific work of Charles Crussard (1916–2008)
  20. Review
  21. Charles Crussard's early contributions: Recrystallization in situ and a Grain Boundary study with J. Friedel and B. Cullity
  22. Magnetohydrodynamics applied to materials processing
  23. Charles Crussard's contribution to sheet metal forming and participation in IDDRG
  24. Glide of dislocations in non-octahedral planes of fcc metals: a review
  25. The deformation stage II of face-centered cubic crystals: Fifty years of investigations
  26. Nucleation and growth during primary recrystallization of certain metals and alloys with a face-centered cubic structure: Formation of the cube texture
  27. Basic
  28. Andrade creep revisited
  29. Application of cluster dynamics modeling to the precipitation in aluminum alloys
  30. On the effect of pre-recovery on subsequent recrystallization
  31. The interplay between grain boundaries and disclinations in condensed matter physics
  32. Plasticity of nanocrystalline materials: a critical viewpoint
  33. Thermoelectric power applied to metallurgy: principle and recent applications
  34. Notifications
  35. People
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 16.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110195/pdf?lang=de
Button zum nach oben scrollen