Startseite The deformation stage II of face-centered cubic crystals: Fifty years of investigations
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

The deformation stage II of face-centered cubic crystals: Fifty years of investigations

  • Ladislas Kubin , Benoit Devincre und Thierry Hoc
Veröffentlicht/Copyright: 11. Juni 2013
Veröffentlichen auch Sie bei De Gruyter Brill

Abstract

This article critically reviews progress in the understanding of strain hardening during the deformation stage II of pure face-centered cubic crystals since its discovery in the mid-1950s. A wealth of models attempted explaining why stage II exhibits a linear slope on the base of specific dislocation configurations and interactions associated with short- or long-range internal stresses. Slip trace observations and more recent investigations on dislocation avalanches led to the identification of intermittent elementary slip events that are now investigated in terms of dislocation mechanisms. Numerical estimates showed that the overcoming of junctions and locks accounts for most of the flow stress and the hardening rate, as assumed by the present forest models. A multiscale analysis of stage II is outlined with emphasis on the modeling of dislocation mean free paths by dislocation dynamics simulations.


* Correspondence address, Dr. Ladislas Kubin LEM, CNRS-ONERA 29 Av. de la Division Leclerc BP 72, 92322 Châtillon Cedex, France Tel.: +33 1 4673 4441 Fax: +33 1 4673 4155 E-mail:

Dedicated to the late Prof. Charles Crussard (1916–2008)


References

[1] C.Crussard: Trans ASM57 (1964) 779.Suche in Google Scholar

[2] C.Crussard, in: Strength of Metals and Alloys (ICSMA 2), Vol. 1, ASM: Metals Park OH (1970) 3.Suche in Google Scholar

[3] C.Crussard: Proc. Roy. Soc. London A371 (1980) 139.10.1098/rspa.1980.0070Suche in Google Scholar

[4] B.Jaoul: Etude de la Plasticité et Application aux Métaux, Dunod, Paris (1965). Reprinted by Presses de l'Ecole des Mines de Paris (2008) ISBN 978-2-911762-91-8.Suche in Google Scholar

[5] J.Friedel: Phil. Mag.46 (1955) 1159.10.1080/14786440508520587Suche in Google Scholar

[6] J.Diehl, S.Mader, A.Seeger: Z. Metallkd.46 (1955) 650.Suche in Google Scholar

[7] J.Diehl: Z. Metallkd.47 (1956) 331.10.1515/ijmr-1956-470508Suche in Google Scholar

[8] A.H.Cottrell: Dislocations and Plastic Flow in Crystals, Clarendon Press, Oxford (1953).Suche in Google Scholar

[9] F.R.N.Nabarro, M.S.Duesbery (Eds.), Dislocations in Solids, Vol. 11, Elsevier, Amsterdam (2002).Suche in Google Scholar

[10] L.M.Clarebrough, M.H.Hargreaves: Progr. Metal Phys.8 (1959) 1.10.1016/0502-8205(59)90013-9Suche in Google Scholar

[11] T.E.Mitchell: Progr. Appl. Mater. Research6 (1964) 117.Suche in Google Scholar

[12] J.Gil Sevillano, in: H.Mughrabi (Ed.), Plastic Deformation and Fracture of Materials, VCH, Weinheim (1993) 19.Suche in Google Scholar

[13] H.Mecking, U.F.Kocks: Prog. Mater. Sci.48 (2003) 1971.Suche in Google Scholar

[14] S.Mader: Z. f. Physik149 (1957) 73.10.1007/BF01325693Suche in Google Scholar

[15] A.H.Cottrell, R.J.Stokes: Proc. Roy. Soc. A233 (1955) 17.10.1098/rspa.1955.0243Suche in Google Scholar

[16] P.A.Jacquet: Acta Metall.2 (1954) 752.10.1016/0001-6160(54)90028-0Suche in Google Scholar

[17] A.Howie, in: I.B.Newkirk, J.H.Wernik (Eds.), Direct Observations of Imperfections in Crystals, Interscience Publishers, New York (1962) 283.Suche in Google Scholar

[18] J.Friedel, in: G.M.Rassweiler, W.L.Grube (Eds.), Internal Stresses and Fatigue in Metals, Elsevier, Amsterdam (1959) 220.Suche in Google Scholar

[19] A.Seeger, J.Diehl, S.Mader, H.Rebstock: Phil. Mag.2 (1957) 323.10.1080/14786435708243823Suche in Google Scholar

[20] A.Seeger: Dislocations and Mechanical Properties of Crystals, Wiley, New York (1957) 243.Suche in Google Scholar

[21] A.Seeger, in: S.Flügge (Ed.), Handbuch der Physik, Vol. VII/2, SpringerBerlin (1958) 1.10.1007/978-3-642-45890-3_1Suche in Google Scholar

[22] P.R.Thornton, P.B.Hirsch: Phil. Mag.3 (1958) 738.10.1080/14786435808237010Suche in Google Scholar

[23] G.Saada: Acta Metall.8 (1960) 841.10.1016/0001-6160(60)90150-4Suche in Google Scholar

[24] P.B.Hirsch, in: G.M.Rassweiler, W.L.Grube (Eds.), Internal Stresses and Fatigue in Metals, Elsevier, Amsterdam (1959) 139.Suche in Google Scholar

[25] J.E.Bailey, P.B.Hirsch: Phil. Mag.5 (1960) 485.10.1080/14786436008238300Suche in Google Scholar

[26] Z.S.Basinski: Phil. Mag.4 (1959) 393.10.1080/14786435908233412Suche in Google Scholar

[27] U.F.Kocks: Phil. Mag.13 (1966) 541.10.1080/14786436608212647Suche in Google Scholar

[28] N.F.Mott: Trans. AIME218 (1962) 962.Suche in Google Scholar

[29] P.B.Hirsch, D.H.Warrington: Phil. Mag.6 (1961) 735.10.1080/14786436108238367Suche in Google Scholar

[30] P.R.Thornton, T.E.Mitchell, P.B.Hirsch: Phil. Mag.7 (1962) 337.10.1080/14786436208211866Suche in Google Scholar

[31] J.Friedel: Les Dislocations, Gauthier-Villars, Paris (1956).Suche in Google Scholar

[32] J.Friedel: Dislocations, Pergamon Press, Oxford (1967).Suche in Google Scholar

[33] D.Kuhlmann-Wilsdorf: Trans. ASME224 (1962) 1047.Suche in Google Scholar

[34] D.Kuhlmann-Wilsdorf, in: F.R.N.Nabarro, M.S.Duesbery (Eds.), Dislocations in Solids, Vol. 11, Elsevier, Amsterdam (2002) 211.10.1016/S1572-4859(02)80010-9Suche in Google Scholar

[35] P.B.Hirsch, The Relation between Structure and Strength of Metals and Alloys, HSMO, London (1963) 40.Suche in Google Scholar

[36] M.Ahmer Wadee, G.W.Hunt, M.A.Peletier: J. Mech. Phys. Solids52 (2004) 1071.10.1016/j.jmps.2003.09.026Suche in Google Scholar

[37] J.N.Florando, M.M.LeBlanc, D.H.Lassila: Scripta Mater.57 (2007) 537.10.1016/j.scriptamat.2007.05.014Suche in Google Scholar

[38] S.J.Basinski, Z.S.Basinski, in: F.R.N.Nabarro (Ed.), Dislocations in Solids, Vol. 4, North-Holland, Amsterdam (1979) 261.Suche in Google Scholar

[39] J.A.Wert: in C.Gundlach, K.Haldrup, N.Hansen, X.Huang, D.Juul Jensen, T.Leffers, Z.J.Li, S.F.Nielsen, W.Pantleon, J.A.Wert, G.Winther (Eds), Evolution of Microstructures in 3D, Roskilde: Risoe National Laboratory (2004) 187.Suche in Google Scholar

[40] S.Forest: Acta Mater.46 (1998) 3265.10.1016/S1359-6454(98)00012-3Suche in Google Scholar

[41] B.Devincre, T.Hoc, L.Kubin: Science320 (2008) 1745.10.1126/science.1156101Suche in Google Scholar

[42] H.Neuhäuser, in: F.R.N.Nabarro, M.S.Duesbery (Eds.), Dislocations in Solids, Vol. 6, Elsevier, Amsterdam (1983) 319.Suche in Google Scholar

[43] P.Ambrosi, Ch.Schwink: Scripta Metall.12 (1978) 303.10.1016/0036-9748(78)90118-7Suche in Google Scholar

[44] L.Kubin, T.Hoc, B.Devincre: Acta Mater.57 (2009) 2567.10.1016/j.actamat.2009.02.013Suche in Google Scholar

[45] P.Ambrosi, E.Göttler, Ch.Schwink: Scripta Metall.8 (1974) 1093.10.1016/S0036-9748(74)80010-4Suche in Google Scholar

[46] J.C.Fisher, E.W.Hart, R.H.Pry: Phys. Rev.87 (1952) 958.10.1103/PhysRev.87.958Suche in Google Scholar

[47] J.Kaiser: Arch. Eisenhüttenwes.24 (1953) 43.10.1002/srin.195301381Suche in Google Scholar

[48] J.B.Lean, J.Plateau, C.Bachet, C.Crussard: C.R. Acad. Sci. Paris246 (1953) 2845.Suche in Google Scholar

[49] M.Zaiser: Adv. Phys.55 (2006) 185.10.1080/00018730600583514Suche in Google Scholar

[50] M.Carmen Miguel, A.Vespignani, S.Zapperi, J.Weiss, J.R.Grasso: Nature410 (2001) 667.Suche in Google Scholar

[51] M.Zaiser, F.Madani Grasset, V.Koutsos, E.Aifantis: Phys. Rev. Lett.93 (2004) 105507.10.1103/PhysRevLett.93.195507Suche in Google Scholar PubMed

[52] T.Richeton, J.Weiss, F.Louchet: Acta Mater.53 (2005) 4463.10.1016/j.actamat.2005.06.007Suche in Google Scholar

[53] J.Weiss, T.Richeton, F.Louchet, F.Chmelik, P.Dobron, D.Entemeyer, M.Lebyodkin, T.Lebedkina, C.Fressengeas, R.J.McDonald: Phys. Rev. B76 (2007) 224110.10.1103/PhysRevB.76.224110Suche in Google Scholar

[54] J.Schwerdtferger, E.Nadgorny, F.Madani-Grasset, V.Koutsos, J.R.Blackford, M.Zaiser: J. Stat Mech. (2007) L04001.10.1088/1742-5468/2007/04/L04001Suche in Google Scholar

[55] D.M.Dimiduk, C.Woodward, R.LeSar, M.D.Uchic: Science312 (2006) 1188.10.1126/science.1123889Suche in Google Scholar

[56] F.F.Csikor, C.Motz, D.Weygand, M.Zaiser, S.Zapperi: Science318 (2007) 251.10.1126/science.1143719Suche in Google Scholar

[57] L.Kubin, B.Devincre, T.Hoc: Acta Mater.56 (2008) 6040.10.1016/j.actamat.2008.08.012Suche in Google Scholar

[58] J.Olfe, H.Neuhäuser: Phys. Stat. Sol. (a)109 (1988) 149.10.1002/pssa.2211090115Suche in Google Scholar

[59] H.Mughrabi, in: A.S.Argon (Ed.), Constitutive Equations in Plasticity, MIT Press: Cambridge, MA (1975) 199.Suche in Google Scholar

[60] H.Mughrabi, T.Ungar, in: F.R.N.Nabarro, M.S.Duesbery (Eds.), Dislocations in Solids, Vol. 11, Elsevier, Amsterdam (2002) 34.10.1016/S1572-4859(02)80011-0Suche in Google Scholar

[61] L.E.Levine, B.C.Larson, W.Yang, M.E.Kassner, J.Z.Tischler, M.A.Delos-Reyes, R.J.Field, W.Liu: Nature Materials5 (2006) 619.10.1038/nmat1698Suche in Google Scholar PubMed

[62] G.Schoeck, R.Frydman: Phys. Stat. Sol. (b)53 (1972) 661.10.1002/pssb.2220530227Suche in Google Scholar

[63] V.V.Bulatov, L.L.Hsiung, M.Tang, A.Arsenlis, M.C.Bartelt, W.Cai, J.N.Florando, M.Hiratani, M.Rhee, G.Hommes, T.G.Pierce, T.Diaz de la Rubia: Nature440 (2006) 1174.10.1038/nature04658Suche in Google Scholar PubMed

[64] R.Madec, L.P.Kubin: Scripta Mater.58 (2008) 767.10.1016/j.scriptamat.2007.12.032Suche in Google Scholar

[65] R.Madec, B.Devincre, L.P.Kubin: Phys. Rev. Lett.89 (2002) 255508.10.1103/PhysRevLett.89.255508Suche in Google Scholar

[66] P.Franciosi, M.Berveiller, A.Zaoui: Acta Metall.28 (1980) 273.10.1016/0001-6160(80)90162-5Suche in Google Scholar

[67] R.Madec, B.Devincre, L.Kubin, T.Hoc, D.Rodney: Science301 (2003) 1879.10.1126/science.1085477Suche in Google Scholar PubMed

[68] B.Devincre, L.Kubin, T.Hoc: Scripta Mater.54 (2006) 741.10.1016/j.scriptamat.2005.10.066Suche in Google Scholar

[69] R.Madec, B.Devincre, L.P.Kubin: Scripta Mater.47 (2002) 689.Suche in Google Scholar

[70] C.Teodosiu, J.L.Raphanel, T.Tabourot, in: C.Teodosiu, J.L.Rapahanel, F.Sidoroff (Eds.), Large Plastic Deformations, Balkema, Rotterdam (1993) 153.Suche in Google Scholar

[71] T.Hoc, C.Rey, J.-L.Raphanel: Acta Mater.49 (2001) 1835.Suche in Google Scholar

[72] P.Chevenard, C.Crussard: C.R. Acad. Sci. Paris214 (1942) 415.Suche in Google Scholar

Received: 2008-9-16
Accepted: 2009-7-25
Published Online: 2013-06-11
Published in Print: 2009-10-01

© 2009, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Introduction
  4. Introduction
  5. G. Petzow: Laudation for Peter Paul Schepp
  6. Dr. Schepp's retirement after 20 years of service was celebrated
  7. Preface to Feature Articles
  8. “SURFACE and INTERFACE ENGINEERING”
  9. Feature
  10. Thermodynamics of reactions and phase transformations at interfaces and surfaces
  11. Oxidation of palladium: from single crystal surfaces towards nanoparticles
  12. On the high-temperature oxidation of MCrAlY coatings
  13. Conducting polymers for corrosion protection: a review
  14. Fundamental and applied aspects of laser surface engineering
  15. Low-temperature gaseous surface hardening of stainless steel: the current status
  16. Foreword
  17. Foreword
  18. Editorial
  19. The scientific work of Charles Crussard (1916–2008)
  20. Review
  21. Charles Crussard's early contributions: Recrystallization in situ and a Grain Boundary study with J. Friedel and B. Cullity
  22. Magnetohydrodynamics applied to materials processing
  23. Charles Crussard's contribution to sheet metal forming and participation in IDDRG
  24. Glide of dislocations in non-octahedral planes of fcc metals: a review
  25. The deformation stage II of face-centered cubic crystals: Fifty years of investigations
  26. Nucleation and growth during primary recrystallization of certain metals and alloys with a face-centered cubic structure: Formation of the cube texture
  27. Basic
  28. Andrade creep revisited
  29. Application of cluster dynamics modeling to the precipitation in aluminum alloys
  30. On the effect of pre-recovery on subsequent recrystallization
  31. The interplay between grain boundaries and disclinations in condensed matter physics
  32. Plasticity of nanocrystalline materials: a critical viewpoint
  33. Thermoelectric power applied to metallurgy: principle and recent applications
  34. Notifications
  35. People
Heruntergeladen am 16.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110191/html
Button zum nach oben scrollen