DGM News

Artikel in diesem Heft

1. Contents
2. Contents
3. Editorial
4. Prof. Dr. Monika Feller-Kniepmeier 80^th birthday
5. Basic
6. Model calculation of inoculation and experimental verification in two alloy-systems
7. Enrichment of boron at grain boundaries of platinum-based alloys determined by electron energy loss spectroscopy in a transmission electron microscope
8. Measurement of the lattice misfit of Pt–Al–Cr superalloy by convergent beam electron diffraction (CBED)
9. Microstructural and micromechanical characterisation of a Pt–Al–Cr–Ni–Re alloy by means of transmission electron microscopy and nanoindentation
10. X-ray reflections from the γ/γ′-microstructure of nickel-base superalloys: effect of the plane tilting
11. Physicochemical properties and creep strength of a single crystal of nickel-base superalloy containing rhenium and ruthenium
12. Interdependence between glass stability and phase formation sequence during crystallization of Zr_46.8Ti_8.2Cu_7.5Ni₁₀Be_27.5 bulk glass
13. On the formation of λ-MnAl₄
14. Applied
15. Development of Ni–Mn-based alloys for the fast epitaxial braze-repair of single-crystalline nickel-based superalloys
16. Influence of heat treatment and microstructure on the tensile pseudoelastic response of an Ni-rich NiTi shape memory alloy
17. Microstructural stability of an Ni–Mo based Hastelloy after 10 MeV electron irradiation at high temperature
18. Oxidation behaviour of TiAl-based intermetallic coatings on γ-TiAl alloys
19. Oxidation and fatigue behaviour of γ-TiAl coated with HIPIMS CrAlYN/CrN nanoscale multilayer coatings and EB-PVD thermal barrier coatings
20. On the stress corrosion cracking behaviour of 6XXX series aluminium alloys
21. Investigation of surface film nanostructure and assessment of its impact on friction force stabilization during automotive braking
22. Creep strength of a binary Al₆₂Ti₃₈ alloy
23. Bowing out of a dislocation from wall of persistent slip bands (PSB)
24. Effect of martensite volume fraction on mechanical properties of dual-phase treated AISI-4012 sheet steels
25. The joint properties of dissimilar aluminum plates joined by friction stir welding
26. Notification
27. DGM News