Skip to main content
Article
Licensed
Unlicensed Requires Authentication

Prof. Dr. Monika Feller-Kniepmeier 80th birthday

Published/Copyright: June 11, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 101 Issue 5

Published Online: 2013-06-11
Published in Print: 2010-05-01

© 2010, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Prof. Dr. Monika Feller-Kniepmeier 80th birthday
  5. Basic
  6. Model calculation of inoculation and experimental verification in two alloy-systems
  7. Enrichment of boron at grain boundaries of platinum-based alloys determined by electron energy loss spectroscopy in a transmission electron microscope
  8. Measurement of the lattice misfit of Pt–Al–Cr superalloy by convergent beam electron diffraction (CBED)
  9. Microstructural and micromechanical characterisation of a Pt–Al–Cr–Ni–Re alloy by means of transmission electron microscopy and nanoindentation
  10. X-ray reflections from the γ/γ′-microstructure of nickel-base superalloys: effect of the plane tilting
  11. Physicochemical properties and creep strength of a single crystal of nickel-base superalloy containing rhenium and ruthenium
  12. Interdependence between glass stability and phase formation sequence during crystallization of Zr46.8Ti8.2Cu7.5Ni10Be27.5 bulk glass
  13. On the formation of λ-MnAl4
  14. Applied
  15. Development of Ni–Mn-based alloys for the fast epitaxial braze-repair of single-crystalline nickel-based superalloys
  16. Influence of heat treatment and microstructure on the tensile pseudoelastic response of an Ni-rich NiTi shape memory alloy
  17. Microstructural stability of an Ni–Mo based Hastelloy after 10 MeV electron irradiation at high temperature
  18. Oxidation behaviour of TiAl-based intermetallic coatings on γ-TiAl alloys
  19. Oxidation and fatigue behaviour of γ-TiAl coated with HIPIMS CrAlYN/CrN nanoscale multilayer coatings and EB-PVD thermal barrier coatings
  20. On the stress corrosion cracking behaviour of 6XXX series aluminium alloys
  21. Investigation of surface film nanostructure and assessment of its impact on friction force stabilization during automotive braking
  22. Creep strength of a binary Al62Ti38 alloy
  23. Bowing out of a dislocation from wall of persistent slip bands (PSB)
  24. Effect of martensite volume fraction on mechanical properties of dual-phase treated AISI-4012 sheet steels
  25. The joint properties of dissimilar aluminum plates joined by friction stir welding
  26. Notification
  27. DGM News
https://doi.org/10.3139/146.100501

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Prof. Dr. Monika Feller-Kniepmeier 80th birthday
  5. Basic
  6. Model calculation of inoculation and experimental verification in two alloy-systems
  7. Enrichment of boron at grain boundaries of platinum-based alloys determined by electron energy loss spectroscopy in a transmission electron microscope
  8. Measurement of the lattice misfit of Pt–Al–Cr superalloy by convergent beam electron diffraction (CBED)
  9. Microstructural and micromechanical characterisation of a Pt–Al–Cr–Ni–Re alloy by means of transmission electron microscopy and nanoindentation
  10. X-ray reflections from the γ/γ′-microstructure of nickel-base superalloys: effect of the plane tilting
  11. Physicochemical properties and creep strength of a single crystal of nickel-base superalloy containing rhenium and ruthenium
  12. Interdependence between glass stability and phase formation sequence during crystallization of Zr46.8Ti8.2Cu7.5Ni10Be27.5 bulk glass
  13. On the formation of λ-MnAl4
  14. Applied
  15. Development of Ni–Mn-based alloys for the fast epitaxial braze-repair of single-crystalline nickel-based superalloys
  16. Influence of heat treatment and microstructure on the tensile pseudoelastic response of an Ni-rich NiTi shape memory alloy
  17. Microstructural stability of an Ni–Mo based Hastelloy after 10 MeV electron irradiation at high temperature
  18. Oxidation behaviour of TiAl-based intermetallic coatings on γ-TiAl alloys
  19. Oxidation and fatigue behaviour of γ-TiAl coated with HIPIMS CrAlYN/CrN nanoscale multilayer coatings and EB-PVD thermal barrier coatings
  20. On the stress corrosion cracking behaviour of 6XXX series aluminium alloys
  21. Investigation of surface film nanostructure and assessment of its impact on friction force stabilization during automotive braking
  22. Creep strength of a binary Al62Ti38 alloy
  23. Bowing out of a dislocation from wall of persistent slip bands (PSB)
  24. Effect of martensite volume fraction on mechanical properties of dual-phase treated AISI-4012 sheet steels
  25. The joint properties of dissimilar aluminum plates joined by friction stir welding
  26. Notification
  27. DGM News
Downloaded on 21.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/146.100501/html
Scroll to top button