Home DGM News
Article
Licensed
Unlicensed Requires Authentication

DGM News

Published/Copyright: October 23, 2019
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 110 Issue 11

Published Online: 2019-10-23
Published in Print: 2019-11-12

© 2019, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Note from the Editor-in-Chief
  5. Original Contributions
  6. The softening factor cb of commercial titanium alloy wires
  7. A comparative assessment of cyclic deformation behavior of SA333 Gr-6 steel at ambient and elevated temperatures
  8. Effects of Ni and Al on the Cu-precipitation in ferritic Fe–Cu–M (M = Ni or Al) alloy
  9. Effect of manganese on the microstructure and mechanical properties of magnesium alloys
  10. Effect of heat treatment and extrusion on wear properties of AZ91-Pr alloy
  11. Effect of anodization treatment on the mechanical properties and fatigue behavior of AA2017-T4 aluminum alloy Al–Cu–Mg1
  12. Microstructural and tribological characterization of molybdenum–molybdenum carbide structures produced by spark plasma sintering
  13. Investigation of indentation and dry sliding wear behaviour of Al-12.6 wt.% Si-10 wt.% TiB2 composites produced by sequential milling and pressureless sintering
  14. Enthalpies of mixing in ternary Ce–Cu–Sb liquid alloys
  15. Effect of in-situ formation of AlP on solidification of hypereutectic Al–Si alloy
  16. Complex-shaped high speed steel with high mechanical performance fabricated by gelcasting sintering
  17. Internal electromagnetic stirring method for preparing a large-sized aluminum alloy billet
  18. DGM News
  19. DGM News
https://doi.org/10.3139/146.019114

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Note from the Editor-in-Chief
  5. Original Contributions
  6. The softening factor cb of commercial titanium alloy wires
  7. A comparative assessment of cyclic deformation behavior of SA333 Gr-6 steel at ambient and elevated temperatures
  8. Effects of Ni and Al on the Cu-precipitation in ferritic Fe–Cu–M (M = Ni or Al) alloy
  9. Effect of manganese on the microstructure and mechanical properties of magnesium alloys
  10. Effect of heat treatment and extrusion on wear properties of AZ91-Pr alloy
  11. Effect of anodization treatment on the mechanical properties and fatigue behavior of AA2017-T4 aluminum alloy Al–Cu–Mg1
  12. Microstructural and tribological characterization of molybdenum–molybdenum carbide structures produced by spark plasma sintering
  13. Investigation of indentation and dry sliding wear behaviour of Al-12.6 wt.% Si-10 wt.% TiB2 composites produced by sequential milling and pressureless sintering
  14. Enthalpies of mixing in ternary Ce–Cu–Sb liquid alloys
  15. Effect of in-situ formation of AlP on solidification of hypereutectic Al–Si alloy
  16. Complex-shaped high speed steel with high mechanical performance fabricated by gelcasting sintering
  17. Internal electromagnetic stirring method for preparing a large-sized aluminum alloy billet
  18. DGM News
  19. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 16.11.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.019114/pdf
Scroll to top button