Contents

Articles in the same Issue

1. Contents
2. Contents
3. Original Contributions
4. In-situ annealing and computation study of cube texture development in a commercial aluminum alloy
5. Dislocation dynamics modeling of plastic deformation in single-crystal copper at high strain rates
6. Investigation of mechanical properties of tubular aluminum foams
7. Dependence of microstructure, microhardness, tensile strength and electrical resistivity on growth rates for directionally solidified Zn-Al-Sb eutectic alloy
8. Effects of temperature on fatigue limits and fracture morphologies of 40Cr steels formed by warm extrusion
9. Synthesis of an oxidation-resistant SiC coating on graphite and modeling analysis with thermodynamics calculations
10. Improved corrosion inhibition of 3-amino-1,2,4-triazole on mild steel electrode in HCl solution using surface nanocrystallization
11. Chunky graphite formation in ductile cast irons: effect of silicon, carbon and rare earths
12. Fabrication of 3D porous MoS₂–GO nanocomposite monolith as a promising adsorbent
13. Short Communications
14. Two-stage method of synthesis of ultrafine powder of α-phase metallic cobalt
15. Developing a multifunctional bio-ceramics composite based on β-tricalcium phosphate working as a single carrier for calcium supplement and low-dose drugs
16. DGM News
17. DGM News