Home Technology DGM News
Article
Licensed
Unlicensed Requires Authentication

DGM News

Published/Copyright: June 5, 2016
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 107 Issue 6

Published Online: 2016-06-05
Published in Print: 2016-06-10

© 2016, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Effect of Peierls stress and strain-hardening parameters on EMR emission in metals and alloys during progressive plastic deformation
  5. Relaxation and diffusion barriers at step edges of Cu, Ag and Au homo- and heterogeneous systems: Case of (100) facet
  6. Simulation analysis on impurity distribution in mc-Si grown by directional solidification for solar cell applications
  7. Experimental investigation and thermodynamic calculation of the Mg–Sr–Zr system
  8. Microstructures and properties of Cr–Cu/W–Cu bi-layer composite coatings prepared by mechanical alloying
  9. Innovative approach to protect magnesium powder during sintering
  10. Friction stir welding of foamable AlSi7 reinforced by B4C
  11. Incorporation of SiC particles in FS welded zone of AZ31 Mg alloy to improve the mechanical properties and corrosion resistance
  12. Effects of fiber volume fraction on strain of piezoelectric fiber composites
  13. Dry wear behavior of cooling-slope-cast hypoeutectic aluminum alloy
  14. Short Communications
  15. In-situ grown interwoven NiSe on Ni foam as a catalyst for hydrazine oxidation
  16. DGM News
  17. DGM News
https://doi.org/10.3139/146.016064

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Effect of Peierls stress and strain-hardening parameters on EMR emission in metals and alloys during progressive plastic deformation
  5. Relaxation and diffusion barriers at step edges of Cu, Ag and Au homo- and heterogeneous systems: Case of (100) facet
  6. Simulation analysis on impurity distribution in mc-Si grown by directional solidification for solar cell applications
  7. Experimental investigation and thermodynamic calculation of the Mg–Sr–Zr system
  8. Microstructures and properties of Cr–Cu/W–Cu bi-layer composite coatings prepared by mechanical alloying
  9. Innovative approach to protect magnesium powder during sintering
  10. Friction stir welding of foamable AlSi7 reinforced by B4C
  11. Incorporation of SiC particles in FS welded zone of AZ31 Mg alloy to improve the mechanical properties and corrosion resistance
  12. Effects of fiber volume fraction on strain of piezoelectric fiber composites
  13. Dry wear behavior of cooling-slope-cast hypoeutectic aluminum alloy
  14. Short Communications
  15. In-situ grown interwoven NiSe on Ni foam as a catalyst for hydrazine oxidation
  16. DGM News
  17. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 20.12.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.016064/html
Scroll to top button