Home DGM News
Article
Licensed
Unlicensed Requires Authentication

DGM News

Published/Copyright: November 30, 2013
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 104 Issue 12

Published Online: 2013-11-30
Published in Print: 2013-12-12

© 2013, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Critical sizes for coherent to semicoherent transition in precipitates
  5. Thixoformability evaluation of AA2011 and AA2014 alloys
  6. Joint strength of friction stir welded AISI 304 austenitic stainless steels
  7. Optimization of process parameters in explosive cladding of titanium/stainless steel 304L plates
  8. Optimization of the hot rolling parameters for evaluation of the formability of Nb-microalloyed steel sheet by using the Taguchi method
  9. XPS measurements of LDX 2101 duplex steel surface after magnetoelectropolishing
  10. Phase equilibria of the Al-Cr-Pr ternary system at 773 K
  11. Processing and mechanical characterisation of monolithic silicon carbide ceramic consolidated by spark plasma sintering (SPS)
  12. Effect of Mn doping on the microstructure and dielectric properties of BaHf0.1Ti0.9O3 ceramics
  13. Nano hydroxyapatite–polysulfone coating on Ti-6Al-4V substrate by electrospinning
  14. Photocatalytic and self-cleaning properties of SiO2/TiO2/SiO2 nanostructured thin film
  15. Formation mechanism of manganese vanadate microtubes and their electrochemical sensing properties
  16. Modification of the luminescent properties of ZnS nanoparticles by the adsorbed species
  17. DGM News
  18. DGM News
https://doi.org/10.3139/146.013124

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Critical sizes for coherent to semicoherent transition in precipitates
  5. Thixoformability evaluation of AA2011 and AA2014 alloys
  6. Joint strength of friction stir welded AISI 304 austenitic stainless steels
  7. Optimization of process parameters in explosive cladding of titanium/stainless steel 304L plates
  8. Optimization of the hot rolling parameters for evaluation of the formability of Nb-microalloyed steel sheet by using the Taguchi method
  9. XPS measurements of LDX 2101 duplex steel surface after magnetoelectropolishing
  10. Phase equilibria of the Al-Cr-Pr ternary system at 773 K
  11. Processing and mechanical characterisation of monolithic silicon carbide ceramic consolidated by spark plasma sintering (SPS)
  12. Effect of Mn doping on the microstructure and dielectric properties of BaHf0.1Ti0.9O3 ceramics
  13. Nano hydroxyapatite–polysulfone coating on Ti-6Al-4V substrate by electrospinning
  14. Photocatalytic and self-cleaning properties of SiO2/TiO2/SiO2 nanostructured thin film
  15. Formation mechanism of manganese vanadate microtubes and their electrochemical sensing properties
  16. Modification of the luminescent properties of ZnS nanoparticles by the adsorbed species
  17. DGM News
  18. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 17.11.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.013124/pdf?lang=en
Scroll to top button