Startseite Influence of Deformation on the Phase Structure of a 30CrMnSi Steel
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Influence of Deformation on the Phase Structure of a 30CrMnSi Steel

  • Mazhyn Skakov , Gulzhaz Uazyrkhanova , Natalya Popova und Michael Scheffler
Veröffentlicht/Copyright: 26. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Materials Testing
Aus der Zeitschrift Materials Testing Band 55 Heft 1

Abstract

The grainary substructure of 30CrMnSi steel has been studied after rolling deformation. It has been found that in the studied material the bulk share of anisotropic grains amounts to 25% and the isotropic grains to 75%. It has been observed that the martensitic structure is completely broken in the rolling process.

Kurzfassung

Die Korn-Unterstruktur eines 30CrMnSi Stahles nach Walzdeformation wurde für diesem Beitrag zugrunde liegende Studie untersucht. Es wurde herausgefunden, dass in dem untersuchten Werkstoff der Anteil anisotropischer Körner 25% und der isotropischer Körner 75% beträgt. Es wurde beobachtet, dass die martensitische Struktur im Walzprozess komplett bricht.

Mazhyn Skakov, born 1952 in Kazakhstan, Professor, Doctor of Physical and Mathematical Sciences, Head of the Department of Technical Physics in East Kazakhstan State Technical University named D.Serikbaev (Kazakhstan). His research interests - the physics of condensed state. He has published more 100 papers in refereed Journals.

Gulzhaz Uazyrkhanova, born 1975 in Kazakhstan, Master of Physics, doctoral study in Ph.D in East Kazakhstan State Technical University named D.Serikbaev (Kazakhstan). Her research interests - the physics of condensed state. Has published two papers in refereed Journals

Natalia Popova, born 1952 in Russia, Candidate of technical science (Ph.D), Research Assistant of the Tomsk State Architecture and Building University (Russia). Her research interests - the physics of condensed state. She has published more 100 papers in refereed Journals.

Michael Scheffler, born 1964 in Germany, Professor, Doctor rer. nat, Director of the Institute of Materials and Joining Technology University named after Otto von Guericke (Germany). His research interests - the physics and chemistry of ceramic materials. He has published more 100 papers in refereed Journals.

References

1 T.Maki: Morphology and substructure of martensite in steels, Phase Transformations in Steels (Volume2), Australia (2012), p. 680Suche in Google Scholar

2 O.Tihonkova, N.Popova, A.Tsellermaer, V.Gromov, E.Kozlov: Influence of tempering on the phase composition of cast moderately alloyed structural steel, Steel in Translation.37 (2007), No. 2, pp. 110–114Suche in Google Scholar

3 M.Umemoto, E.Yoshitake, J.Tamura: The morphology of martensite in Fe-C, Fe-Ni-C, Fe-Cr-C alloys, J. Mater. Science18 (1983), No. 10, pp. 2893–2904Suche in Google Scholar

4 A.Gromova, I.Ivanov, S.Vorobev, S.Konovalov: Dislocation substructures evolution in steels under fatigue, Metal (2005), No. 5, pp. 24–26Suche in Google Scholar

5 M.Calcagnotto, Y.Adachi, D.Ponge, D.Raabe: Deformation and fracture mechanisms in fine-and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging, Acta Materiala59 (2011), No. 2, pp. 658–670Suche in Google Scholar

6 L.Utevskiy: Diffraction electronic microscopy in material study, Metallurgy, Moscow (1973)Suche in Google Scholar

7 K.Endrews, D.Daison, S.Kioun: Electrondiffraction patterns and their interpretation, Mir, Moscow (1971)Suche in Google Scholar

8 V.Rybin: Large plastic deformations and metals breakdown, Metallurgy, Moscow (1986)Suche in Google Scholar

9 E.Kozlov, N.Popova, N.Grigoryeva: Stages of plastic deformations, substructure evolution, and picture of sliding in alloys with dispersed hardening, News of Higher Education Institutions, Physics (1991), No. 3, pp. 112–128Suche in Google Scholar

10 E.Kozlov, N.Popova, V.Ignatenko: Substructure type affect on re-distribution of carbon in steel of martensite type in the process of plastic deformation, News of Higher Education Institutions, Physics (2002), No. 3, pp. 72–86Suche in Google Scholar

Published Online: 2013-05-26
Published in Print: 2013-01-01

© 2013, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Inhalt/Contents
  2. Inhalt
  3. Fachbeiträge/Technical Contributions
  4. Calculation of S-N Curves for Different Mean Stresses on the Basis of “PHYBALmean” for the Quenched and Tempered Steel SAE 4140
  5. Prüfung linearer Bauteile auf Wälzfestigkeit
  6. Methods for Polymer Diagnostics for the Automotive Industry*
  7. A New Design of Hip Prosthesis Coating using Functionally Graded Material
  8. Approximation of Damage Accumulation in Fibre Reinforced Polymers
  9. Pt-Rh Alloys: Investigation of Creep Rate and Rupture Time at High Temperatures
  10. Effect of Alloying Elements on the Tooling Capabilities of High Speed Steels Fabricated by Powder Metallurgy
  11. Microstructure and Abrasion Wear Resistance of Thermally Sprayed Cermet Coatings
  12. Influence of Deformation on the Phase Structure of a 30CrMnSi Steel
  13. Development of Novel Luminescent Materials with High Quality Blue Light-Emitting Properties Based on Zinc Oxides
  14. Drilling Template Used to Produce Cellular EPS Patterns for the Lost Foam Casting Process
  15. Kalender/Calendar
  16. Kalender
  17. Vorschau/Preview
  18. Vorschau
https://doi.org/10.3139/120.110404

Artikel in diesem Heft

  1. Inhalt/Contents
  2. Inhalt
  3. Fachbeiträge/Technical Contributions
  4. Calculation of S-N Curves for Different Mean Stresses on the Basis of “PHYBALmean” for the Quenched and Tempered Steel SAE 4140
  5. Prüfung linearer Bauteile auf Wälzfestigkeit
  6. Methods for Polymer Diagnostics for the Automotive Industry*
  7. A New Design of Hip Prosthesis Coating using Functionally Graded Material
  8. Approximation of Damage Accumulation in Fibre Reinforced Polymers
  9. Pt-Rh Alloys: Investigation of Creep Rate and Rupture Time at High Temperatures
  10. Effect of Alloying Elements on the Tooling Capabilities of High Speed Steels Fabricated by Powder Metallurgy
  11. Microstructure and Abrasion Wear Resistance of Thermally Sprayed Cermet Coatings
  12. Influence of Deformation on the Phase Structure of a 30CrMnSi Steel
  13. Development of Novel Luminescent Materials with High Quality Blue Light-Emitting Properties Based on Zinc Oxides
  14. Drilling Template Used to Produce Cellular EPS Patterns for the Lost Foam Casting Process
  15. Kalender/Calendar
  16. Kalender
  17. Vorschau/Preview
  18. Vorschau
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 25.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/120.110404/html
Button zum nach oben scrollen