Contents

Artikel in diesem Heft

1. Inhalt/Contents
2. Contents
3. Fachbeiträge/Technical Contributions
4. The principles of measurement and testing to characterize material properties
5. Electrochemical behavior of alloy AgCu50 during oxidation in the presence of chlorides and benzotriazole
6. Mechanical property effects of symmetrical hour glass shapes formed during double-sided TIG keyhole arc welding of AISI1040 joints
7. Residual stress state in pipe cut ring specimens for fracture toughness testing
8. Effect of overlap length and scarf angle on the mechanical properties of different adhesive joints subjected to tensile loads
9. Effect of post-weld heat treatment on fusion boundary microstructure in dissimilar metal welds for subsea service
10. Effects of abaca fiber reinforcement on the dynamic mechanical behavior of vinyl ester composites
11. Experimental and theoretical study of the rubbing process of epoxy composites against steel
12. Structural self-organization of titanium alloys under impulse force action
13. Effect of SiC particle size on the mechanical properties of closed aluminum foams
14. Comparison of different bushing applications in composite structures of the aerospace industry
15. Performance monitoring of superlarge-diameter rock-socketed piles by optic fiber sensors
16. Free vibration of a Timoshenko beam carrying three dimensional tip mass: Analytical solution and experimental modal testing
17. Electrochemical properties of LaNi_4.2Co_0.4Zn_0.1Al_0.3 and LaNi_4.3Co_0.4Zn_0.1Al_0.2 alloys as anode materials for Ni-MH batteries
18. Production of hard hydrophilic Ni-B coatings on hydrophobic Ni-Ti and Ti-6Al-4V alloys by electroless deposition