Investigations on Erosion and Corrosion Behavior of High-Velocity Oxy-Fuel Sprayed WC-Cr3C2-Ni Coatings on AISI 1018 Steel
-
M. Ravichandran
Abstract
WC-Cr3C2-Ni thermal spray coatings was applied on the surface of low carbon steel (AISI 1018) using high-velocity oxy-fuel (HVOF) process. The base metal, coating powder and coated materials were analyzed using scanning electron microscope. Water-jet erosion test (WJET) was used to test the mass loss of the samples with different process parameters such as impingement angle, water jet velocity, erodent discharge, and stand-off distance. As results lower mass loss was observed for the selected process parameters. Pitting corrosion test reveals that better corrosion resistance can be achieved for the low carbon steels by WC-Cr3C2-Ni powder coating.
Kurzfassung
Thermisch gespritzte WC-Cr3C2-Ni-Beschichtungen wurden auf der Oberfläche eines niedriglegierten Stahls (AISI 1018) mit dem Hochgeschwindigkeits-Flammspritzen (HVOF) aufgetragen. Das Stahlsubstrat, das Beschichtungspulver und das beschichtete Material wurden mit dem Rasterelektronenmikroskops analysiert. Es wurde ein Wasserstrahlverschleißtest (WJET) angewandt, um den Gewichtsverlust der Proben mit verschiedenen Prozessparametern wie Aufprallwinkel, Wasserstrahlgeschwindigkeit, Beladung mit Erosionsmittel und Düsenabstand zur Oberfläche zu prüfen. Für die ausgewählten Prozessparameter wurde ein Massenverlust beobachtet. Der Lochfraßtest ergab, dass eine bessere Korrosionsbeständigkeit durch eine WC-Cr3C2-Ni-Pulverbeschichtung für den niedriglegierten Stahl erzielt werden kann.
References
1. Hawthorne, H. M.; Arsenault, B.; Immarigeon, J. P.; Legoux, J. G.; Parameswaran, V. R.: Comparison of slurry and dry erosion behavior of some HVOF thermal sprayed coatings. Wear225–229 (1999), pp. 825–834, 10.1016/S0043-1648(99)00034-4Search in Google Scholar
2. Finnie, I.: Some reflections on the past and future of erosion. Wear186–187 (1995), pp. 1–10, 10.1016/0043-1648(95)07188-1Search in Google Scholar
3. Chatha, S. S.; SidhuH.S.; Sidhu, B. S.: Characterization and corrosion-erosion behaviour of carbide based thermal spray coatings. J. Min. Mat. Charact. Eng.11 (2012), pp. 569–586, 10.4236/jmmce.2012.116041Search in Google Scholar
4. Mann, B. S.; Vivek, A.: HVOF coating and surface treatment for enhancing drop-let erosion resistance of steam turbine blades. Wear254 (2003), pp. 652–667, 10.1016/s0043-1648(03)00253-9Search in Google Scholar
5. Levy, A. V.: Solid particle erosion and erosion-corrosion of materials. ASM Int., Materials Park, OH/USA, 199510.5006/1.3293564Search in Google Scholar
6. De Villers Lovelock, H. L.: Powder/Processing/Structure Relationship in WC-CO Thermal Spray Coatings: a Review of Published Literature. J. Therm. Spray Technol7 (1998), pp. 357–373, 10.1361/105996398770350846Search in Google Scholar
7. Schwetzke, R.; Kreye, V.: Microstructure and Properties of Tungsten Carbide Coatings Sprayed with Various High-Velocity Oxygen Fuel Spray Systems. J. Therm. Spray Technol8 (1999), pp. 433–438, 10.1361/105996399770350395Search in Google Scholar
8. Aalamialeagha, M. E.; Harris, S. J.; Emamighomi, M.: Infiuence of the HVOF spraying process on the microstructure and corrosion behavior of Ni-20%Cr coatings. J. Mater. Sci.38 (2003), pp. 4587–4596, 10.1023/A:1027302122749Search in Google Scholar
9. Venkateswarlu, K.; Rajinikanth, V.; Naveen, T.; Sinha, D. P.; Atiquzzaman; Ray, A. K.: Abrasive wear behavior of thermally sprayed diamond reinforced composite coating deposited with both oxy-acetylene and HVOF techniques. Wear266 (2009), pp. 995–1002, 10.1016/j.wear.2009.02.001Search in Google Scholar
10. Shrestha, S.; Hodgkiess, T.; Neville, A.: Erosion-corrosion behavior of high-velocity oxy-fuel Ni-Cr-Mo-Si-B coatings under high-velocity sea water jet impingement. Wear259 (2005), pp. 208–218, 10.1016/j.wear.2005.01.038Search in Google Scholar
11. Li, M.; Shi, D.; PanagiotisD.C.: Modeling and control of HVOF thermal spray processing of WC-Co coatings. Powd. Techn.156 (2005), pp. 177–194, 10.1016/j.powtec.2005.04.011Search in Google Scholar
12. De Palo, S.; Mohanty, M.; Marc-CharlesH.; Dorfman, M.: Fracture toughness of HVOF sprayed WC-Co coatings. In: Thermal Spray 2000: Surface Engineering via Applied Research, C. C.Berndt (Ed.), 2000, pp. 245–250. – ISBN 978-0-87170-680-5Search in Google Scholar
13. Arsenault, B.; Legoux, J. G.; Hawthorne, H. M.: Slurry erosion of high velocity oxy-fuel thermal sprayed coatings. In: Thermal Spray: A United Forum for Scientific and Technological Advances, C. C.Berndt (Ed.), ASM Int., Materials Park, OH/USA, 1997, pp. 97–106Search in Google Scholar
14. Karimi, A.; Verdon, C. H.; Martin, J. L.; Schmid, R. K.: Slurry erosion behavior of thermally sprayed WC-M coatings. Wear186–187 (1995), pp. 480–486, 10.1016/0043-1648(95)07154-7Search in Google Scholar
15. Hawthorne, H. M.; Arsenault, B.; Immarigeon, J. P.; Legoux, J. G.; Parameswaran, V. R.: Comparison of slurry and dry erosion behaviour of some HVOF thermal sprayed coatings. Wear225–229 (1999), pp. 825–834, 10.1016/s0043-1648(99)00034-4Search in Google Scholar
16. Mann, B. S.; VivekArya; Maiti, A. K.; Rao, M. U. B.; PankajJoshi: Corrosion and erosion performance of HVOF/TiAlN PVD coatings and candidate materials for high pressure gate valve application. Wear260 (2006), pp. 75–82, 10.1016/j.wear.2004.12.045Search in Google Scholar
17. Wood, R. J. K.: The sand erosion performance of coatings. Mat. & Des.20 (1999), pp. 179–191, 10.1016/s0261-3069(99)00024-2Search in Google Scholar
18. Vicenzi, J.; Villanova, D. L.; Lima, M. D.; Takimi, A. S.; Marques, C. M.; Bergmann, C. P.: HVOF coatings against high temperature erosion (∼ 300 °C) by coal fly ash in thermoelectric power plant. Mat. & Des.27 (2006), pp. 236–242, 10.1016/j.matdes.2004.10.008Search in Google Scholar
19. Oka, Y. I.; Mihara, S.; Miyata, H.: Effective parameters for erosion caused by water droplet impingement and applications to surface treatment technology. Wear263 (2007), pp. 386–394, 10.1016/j.wear.2006.11.022Search in Google Scholar
© 2016, Carl Hanser Verlag, München
Articles in the same Issue
- Veranstaltungen/Events
- Veranstaltungen
- HTM-Praxis
- HTM-Praxis
- Kurzfassungen/Abstracts
- Kurzfassungen
- Inhalt/Contents
- Inhalt
- Fachbeiträge/Technical Contributions
- In-line Process Control in the Active Screen Plasma Nitrocarburizing Using a Combined Approach Based on Infrared Laser Absorption Spectroscopy and Bias Power Management*
- An Investigation of the Tribological Behaviour of High-Speed Tool Steels at Elevated Temperatures*
- Vergleich tribologischer Laboranalysen mit praktischen Ergebnissen aus Umform- und Zerspanprozessen am Beispiel von schwefelhaltigen Kühlschmierstoffen
- Investigations on Erosion and Corrosion Behavior of High-Velocity Oxy-Fuel Sprayed WC-Cr3C2-Ni Coatings on AISI 1018 Steel
- Automatische Qualitätskontrolle von Walzstählen mit der ACA-Methode
Articles in the same Issue
- Veranstaltungen/Events
- Veranstaltungen
- HTM-Praxis
- HTM-Praxis
- Kurzfassungen/Abstracts
- Kurzfassungen
- Inhalt/Contents
- Inhalt
- Fachbeiträge/Technical Contributions
- In-line Process Control in the Active Screen Plasma Nitrocarburizing Using a Combined Approach Based on Infrared Laser Absorption Spectroscopy and Bias Power Management*
- An Investigation of the Tribological Behaviour of High-Speed Tool Steels at Elevated Temperatures*
- Vergleich tribologischer Laboranalysen mit praktischen Ergebnissen aus Umform- und Zerspanprozessen am Beispiel von schwefelhaltigen Kühlschmierstoffen
- Investigations on Erosion and Corrosion Behavior of High-Velocity Oxy-Fuel Sprayed WC-Cr3C2-Ni Coatings on AISI 1018 Steel
- Automatische Qualitätskontrolle von Walzstählen mit der ACA-Methode
