Verfahren zur experimentellen Bestimmung von Parametern für Reibungsmodelle beim Zerspanen

References

1 Andreev, G. S.: Investigation of Stresses in Tool Work Parte with the Polarization-optical Adjustment by Filming Application. Bulletin of Machinery5 (1958) 1, p. 34–36Search in Google Scholar

2 Autenrieth, H.; Weber, M.; Kotschenreuther, J. et al.: Influence of Friction and Process Parameters on the Specific Cutting Force and Surface Characteristics in Micro Cutting. In: Proceedings of the 10^th CIRP International Workshop on Modeling of Machining Operations, 2007, pp. 539–548Search in Google Scholar

3 Bobrov, B. F.: Fundamentals of Cutting Metal Theory. Moscow, Machinery, 1975, 334 p.Search in Google Scholar

4 Chandrasekaran, H.; Kapoor, D.V.: Photoelastic Analysis of Tool-chip Interface Stresses. Transactions of the ASME: Journal of Engineering for Industry87 (1965) 4, pp. 495–50210.1115/1.3670869Search in Google Scholar

5 Childs, T. H.; Maekawa, K.; Obikawa, T.; Yamane, Y.: Metal Machining Theory and Applications. Arhold, London2000, 403 p.Search in Google Scholar

6 Childs, T. H.: Friction Modelling in Metal Cutting. Wear, 2005, pp. 310–318. 10.1016/j.wear.2005.01.052Search in Google Scholar

7 Dubar, L.; Dubois, A.; Dubar, M.: Friction and Wear Phenomena in Cold Metal Forming: an Integrated Approach. Journal Engineering Manufacture220 (2006) 1, pp. 1–1010.1243/095440505X32454Search in Google Scholar

8 Granovski, G. I.; Granovski, V. G.: Cutting of Metal. Higher School, Moscow, 1985, 304 p.Search in Google Scholar

9 Grudev, A. P.; Silberg, Ju. B.; Tilik, V. T.: Friction and Lubrication by Metal Forming. Metallurgy, Moscow, 1982, 312 p.Search in Google Scholar

10 Habak, M.; Leburn, J. L.; Badie-Levet, D.: Effect of the Microstructure on the Tool/Chip Tribological Contact in Hard Turning of 100Cr6 Bearing Steel. In: Proceedings of the 10^th CIRP International Workshop on Modeling of Machining Operations, 2007, pp. 365–37210.1504/ijmmm.2009.026932Search in Google Scholar

11 Heisel, U.; Krivoruchko, D. V.; Zaloha, V. A.; Storchak, M.: Cause Analysis of Errors in FE Prediction Orthogonal Cutting Performances. In: Proceedings of the 10^th CIRP International Workshop on Modelling of Machining Operations. Calabria, 2007, pp. 141–148Search in Google Scholar

12 Heisel, U.; Kryvoruchko, D. V.; Zaloha, V. A.; Storchak, M.; Stehle, T.: Thermomechanische Wechselwirkungen beim Zerspanen. ZWF104 (2009) 4, S. 263–272Search in Google Scholar

13 Hong, S. Y.; Ding, Y.; Jeong, J.: Experimental Evaluation of Friction Coefficient and Liquid Nitrogen Lubrication Effect in Cryogenic Machining. Machining Science and Technology6 (2002) 2, pp. 235–25010.1081/MST-120005958Search in Google Scholar

14 Jakubov, F. Ja.; Kim, V. A.: Structure-energy Aspects of Strengthening and Cutting Power Increase. Krim Educational-pedagogic State Publisher, Simferopol, 2005, 300 p.Search in Google Scholar

15 Johnson, K. L.: Contact Mechanics. Gam-bridge University Press, 1985, 438 p.10.1017/CBO9781139171731Search in Google Scholar

16 Klocke, F.; Raedt, H.; Hoppe, S.: 2D-FEM Simulation of the Orthogonal High Speed Cutting Process. Machining Science and Technology5 (2001) 3, pp. 323–34010.1081/MST-100108618Search in Google Scholar

17 Kostezkiy, B. I.: Fundamental Regularities of Friction and Wear. Kiev, Information, 1981, 30 p.Search in Google Scholar

18 Kragelskiy, I. V.: Friction, Wear and Lubrication: Hand-book in 2 Volumes, Moscow, Machinery, 1978, Vol. 1, 400 p.Search in Google Scholar

19 Krivoruchko, D. V.: Effectiveness Increase of Smooth Machining on Basis of Model Analytic of Force Interaction between Wedge and Piecework. Thesis of Dissertation, ISM, Kiev, 2002, 20 p.Search in Google Scholar

20 Kusnezov, V. D.: Physic of Cutting and Friction for Metals and Crystals. Science, Moscow, 1977, 310 p.Search in Google Scholar

21 Kusnezov, V. A.: Features of Chip Formation by Cutting of Prestrained Layer. Cutting and Tool in Technological Systems36 (1986), pp. 74–77Search in Google Scholar

22 Loveday, M. S.; Brooks, M.: Consideration of High Temperature Friction Measurement Uncertainty. NPL Report CMMT(MN)070, 2000Search in Google Scholar

23 Makarov, A. D.: Optimisation of Metal Cutting. Machinery, Moscow, 1976, 278 p.Search in Google Scholar

24 Masur, N. P.: Development of Theoretical Foundations and Practical Application of Thermomecanical Cutting Models from Plastic Materials. Dissertation Dr. Sc. techn., Kiev, 1999, 309 p.Search in Google Scholar

25 Melihov, S. G.: Method of Metal Strained and Deformed State Calculation in the Cutting on Basis of Plastic Flow of the Heterogeneous Body. Dissertation Dr.-Ing., Moscow, 1971, 159 p.Search in Google Scholar

26 Özel, T.; Altan, T.: Determination of Work-piece Flow Stress and Friction at the Chip-tool Contact for High-speed Cutting. International Journal of Machine Tools & Manufacture40 (2000) 1, pp. 133–15210.1016/S0890-6955(99)00051-6Search in Google Scholar

27 Özel, T.; Zeren, E.: Determination of Work Material Flow Stress and Friction Properties for FEA of Machining Using Orthogonal Cutting Tests. Journal of Materials Processing Technology153–154C (2004), pp. 1019–1025Search in Google Scholar

28 Ostafjev, V. A.: Basic physics of Metal Cutting Processes. Kiev, High school, 1976, 136 p.Search in Google Scholar

29 Ostafjev, V. A.: Calculation of Tool Dynamic Strength. Moscow, Machinery, 1979, 168 p.Search in Google Scholar

30 Oxley, P. L.: Mechanics of Machining: An Analytical Approach to Assessing Machinability. Ellis Horwood Limited, 1989, 242 p. 10.1115/1.2888318Search in Google Scholar

31 Poletika, M. F.: Contact Loading at Cutting Surfaces Tool. Moscow, Machinery, 1969, 150 p.Search in Google Scholar

32 Prakash, V.: A Pressure-shear Plate Impact Experiment for Investigating Transient Friction. Experimental Mechanics35 (1995) 4, pp. 329–33610.1007/BF02317542Search in Google Scholar

33 Raedt, J. W.: Grundlagen für das schmiermittelreduzierte Tribosystem bei der Kaltumformung des Einsatzstahles 16MnCr5. Dissertation RWTH Aachen, Aachen, 2002, 163 S.Search in Google Scholar

34 Rajagopalan, S.; Prakash, V.: A Modified Torsional Kolsky Bar for Investigating Dynamic Friction. Experimental Mechanics39 (1999) 4, pp. 295–30310.1007/BF02329808Search in Google Scholar

35 Reznikov, A. N.: Thermophysics of Cutting. Moscow, Machinery, 1969, 288 p.Search in Google Scholar

36 Sartkulvanich, P.; Altan, T.; Göcmen, A.: Efects of Flow Stress and Friction Models in Finite Element Simulation of Orthogonal Cutting – A Sensivity Analysis. Machining Science and Technology9 (2005) 1, pp. 1–2610.1081/MST-200051211Search in Google Scholar

37 Schmitz, T. L.; Action, J. E.; Sawyer, W.G. and Ziegert, J.C.: Dynamic Friction Coefficient Measurements: Device and Uncertainty Analysis. In: Proceedings of the 18^th American Society of Precision Engineers, Annual Meeting Portland, OR 2003Search in Google Scholar

38 Shuster, L. S.: Adhesive interaction of Cutting Tool with Work Material. Machinery, Moscow, 1988, 96 p.Search in Google Scholar

39 Sohner, J.: Beitrag zur Simulation zerspanungstechnologischer Vorgange mit Hilfe der Finite-Element-Methode. Dissertation Universitaet Karlsruhe, Karlsruhe, 2003, 162 S.Search in Google Scholar

40 Shaw, M. C.: Metal Cutting Principles. Oxford University Press, Oxford, 200510.1016/0301-679x(85)90013-1Search in Google Scholar

41 Stribeck, R.: Die wesentlichen Eigenschaften der Gleit- und Rollenlager. Zeitschrift des VDI46 (1902), S. 1342–1348Search in Google Scholar

42 Tao, Z.; Lovell, M.; Yang, J.: Evaluation of Interfacial Friction in Material Removal Processes: Determining the Role of Work-piece Properties and Contact Geometry. Wear256 (2004), pp. 664–67010.1016/S0043-1648(03)00511-8Search in Google Scholar

43 Vnukov, Ju. N.: High-Speed Steel Tool Wear Ability Increase on Basis of Friction Condition Investigation and Realization of New Technological Feature. Dissertation Dr. Sc. techn. Baumann State Engineering University, Moscow, 1992, 45 p.Search in Google Scholar

44 Wasin, S. A.; Wereshchaka, A. S.; Kushner, W. S.Material Cutting: Thermomechanical Approach for Interaction by Cutting. Moscow, Technical University of Bauman, 2001, 448 p.Search in Google Scholar

45 Xie, L.: Estimation of Two-dimension Tool Wear Based on Finite Element Method. Dissertation Universitaet Karlsruhe, Karlsruhe, 2004, 143 p.Search in Google Scholar

46 Zorev, N. N.: Metal Cutting Mechanics. Pergamon Press GmbH, Frankfurt am Main, 1966, 526 p.Search in Google Scholar