Precautions in using global kinetic and thermodynamic models for characterization of drug release from multivalent supports
-
Gheorghe Maria
und
Ionela Luta
Abstract
Building-up a detailed kinetic model for drug release from various supports is a difficult task, especially when chemical reactions take place, accompanied by adsorption-desorption and diffusion steps. Often, semi-empirical release models derived from theoretical formulations of the transport process and system characteristics are employed. Their parameters have limited validity as they are dependent on the support, drug-ligand properties, and release conditions. However, they are often used for a quick simulation and design of drug delivery systems with a controlled release correlating the model parameters with the system characteristics and release conditions. Detailed information allows elaboration of an extended mechanistic model; the bias in the predictions introduced on various levels of model simplification is presented in this paper. A case study of a chemically activated ligand release in human plasma from a multivalent dendrimeric support is approached, pointing out the imprecision introduced by the gradual simplification of an extended model as well as the low reliability of the prediction when using various semi-empirical global models.
[1] Bajpai, A. K., Bajpai, J., & Shukla, S. (2003). Release dynamics of tetracycline from a loaded semi-interpenetrating polymeric material of polyvinyl alcohol and poly(acrylamideco-styrene). Journal of Material Science: Materials in Medicine, 14, 347–357. http://dx.doi.org/10.1023/A:102298393254810.1023/A:1022983932548Suche in Google Scholar
[2] Bernik, D. L., Zubiri, D., Monge, M. E., & Negri, R. M. (2006). New kinetic model of drug release from swollen gels under non-sink conditions. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 273, 165–173. DOI: 10.1016/j.colsurfa.2005.08.018. http://dx.doi.org/10.1016/j.colsurfa.2005.08.01810.1016/j.colsurfa.2005.08.018Suche in Google Scholar
[3] Chien, Y. W., & Lin, S. (2002). Drug delivery: Controlled release. In E. Mathiowitz (Ed.), Encyclopedia of pharmaceutical technology (pp. 811–833). New York, NY, USA: Marcel Dekker. DOI: 10.1081/E-EPT-100001051. Suche in Google Scholar
[4] Chirico, S., Dalmoro, A., Lamberti, G., Russo, G., & Titomanlio, G. (2007). Analysis and modeling of swelling and erosion behavior for pure HPMC tablet. Journal of Controlled Release, 122, 181–188. DOI: 10.1016/j.jconrel.2007.07.001. http://dx.doi.org/10.1016/j.jconrel.2007.07.00110.1016/j.jconrel.2007.07.001Suche in Google Scholar
[5] Coviello, T., Alhaique, F., Parisi, C., Matricardi, P., Bocchinfuso, G., & Grassi, M. (2005). A new polysaccharidic gel matrix for drug delivery: preparation and mechanical properties. Journal of Controlled Release, 102, 643–656. DOI: 10.1016/j.jconrel.2004.10.028. http://dx.doi.org/10.1016/j.jconrel.2004.10.02810.1016/j.jconrel.2004.10.028Suche in Google Scholar
[6] Doadrio, J. C., Sousa, E. M. B., Izquierdo-Barba, I., Doadrio, A. L., Perez-Pariente, J., & Vallet-Regí, M. (2006). Functionalization of mesoporous materials with long alkyl chains as a strategy for controlling drug delivery pattern. Journal of Materials Chemistry, 16, 462–466. DOI: 10.1039/b510101h. http://dx.doi.org/10.1039/b510101h10.1039/B510101HSuche in Google Scholar
[7] Ferrero, C., Massuelle, D., & Doelker, E. (2010). Towards elucidation of the drug release mechanism from compressed hydrophilic matrices made of cellulose ethers. II. Evaluation of a possible swelling-controlled drug release mechanism using dimensionless analysis. Journal of Controlled Release, 141, 223–233. DOI: 10.1016/j.jconrel.2009.09.011. http://dx.doi.org/10.1016/j.jconrel.2009.09.01110.1016/j.jconrel.2009.09.011Suche in Google Scholar
[8] Froment, G. F., & Hosten, L. H. (1981). Catalytic kinetics: Modelling. In L. Anderson, & M. Boudart (Eds.), Catalysis: Science and technology (Vol. 2, pp. 97–170). Berlin, Germany: Springer-Verlag. Suche in Google Scholar
[9] Gillies, E. R., & Fréchet, J. M. J. (2005). Dendrimers and dendritic polymers in drug delivery. Drug Discovery Today, 10, 35–43. DOI: 10.1016/S1359-6446(04)03276-3. http://dx.doi.org/10.1016/S1359-6446(04)03276-310.1016/S1359-6446(04)03276-3Suche in Google Scholar
[10] Ho, Y.-S. (2006). Second-order kinetic model for the sorption of cadmium onto tree fern: A comparison of linear and non-linear methods. Water Research, 40, 119–125. DOI: 10.1016/j.watres.2005.10.040. http://dx.doi.org/10.1016/j.watres.2005.10.04010.1016/j.watres.2005.10.040Suche in Google Scholar PubMed
[11] Hughes, G. A. (2005). Nanostructure-mediated drug delivery. Nanomedicine: Nanotechnology, Biology, and Medicine, 1, 22–30. DOI: 10.1016/j.nano.2004.11.009. http://dx.doi.org/10.1016/j.nano.2004.11.00910.1016/j.nano.2004.11.009Suche in Google Scholar PubMed
[12] Li, H., Yan, G., Wu, S., Wang, Z., & Lam, K. Y. (2004). Numerical simulation of controlled nifedipine release from chitosan microgels. Journal of Applied Polymer Science, 93, 1928–1937. DOI: 10.1002/app.20652. http://dx.doi.org/10.1002/app.2065210.1002/app.20652Suche in Google Scholar
[13] Liechty, W. B., Kryscio, D. R., Slaughter, B. V., & Peppas, N. A. (2010). Polymers for drug delivery systems. Chemical and Biomolecular Engineering, 1, 149–173. DOI: 10.1146/annurev-chembioeng-073009-100847. http://dx.doi.org/10.1146/annurev-chembioeng-073009-10084710.1146/annurev-chembioeng-073009-100847Suche in Google Scholar
[14] Lin, C.-C., & Metters, A. T. (2006). Hydrogels in controlled release formulations: Network design and mathematical modeling. Advanced Drug Delivery Reviews, 58, 1379–1408. DOI: 10.1016/j.addr.2006.09.004. http://dx.doi.org/10.1016/j.addr.2006.09.00410.1016/j.addr.2006.09.004Suche in Google Scholar
[15] Lin, C. X., Qiao, S. Z., Yu, C. Z., Ismadji, S., & Lu, G. Q. (2009). Periodic mesoporous silica and organosilica with controlled morphologies as carriers for drug release. Microporous and Mesoporous Materials, 117, 213–219. DOI: 10.1016/j.micromeso.2008.06.023. http://dx.doi.org/10.1016/j.micromeso.2008.06.02310.1016/j.micromeso.2008.06.023Suche in Google Scholar
[16] Maria, G. (2005). Relations between apparent and intrinsic kinetics of “programmable” drug release in human plasma. Chemical Engineering Science, 60, 1709–1723. DOI: 10.1016/j.ces.2004.11.009. http://dx.doi.org/10.1016/j.ces.2004.11.00910.1016/j.ces.2004.11.009Suche in Google Scholar
[17] Maria, G. (2004). A review of algorithms and trends in kinetic model identification for chemical and biochemical systems. Chemical and Biochemical Engineering Quarterly, 18, 195–222. Suche in Google Scholar
[18] Marucci, M., Ragnarsson, G., Nilsson, B., & Axelsson, A. (2010). Osmotic pumping release from ethyl-hydroxypropyl-cellulose-coated pellets: A new mechanistic model. Journal of Controlled Release, 142, 53–60. DOI: 10.1016/j.jconrel. 2009.10.009. http://dx.doi.org/10.1016/j.jconrel.2009.10.00910.1016/j.jconrel.2009.10.009Suche in Google Scholar
[19] Muschert, S., Siepmann, F., Leclercq, B., Carlin, B., & Siepmann, J. (2009). Prediction of drug release from ethylcellulose coated pellets. Journal of Controlled Release, 135, 71–79. DOI: 10.1016/j.jconrel.2008.12.003. http://dx.doi.org/10.1016/j.jconrel.2008.12.00310.1016/j.jconrel.2008.12.003Suche in Google Scholar
[20] Narasimhan, B., Mallapragada, S. K., & Peppas, N. A. (1999). Release kinetics, data interpretation. In E. Mathiowitz (Ed.), Encyclopedia of controlled drug delivery (pp. 921–935). New York, NY, USA: Wiley. Suche in Google Scholar
[21] Oubagaranadin, J. U. K., Murthy, Z. V. P., & Rao, P. S. (2007). Applicability of three-parameter isotherm models for the adsorption of mercury on Fuller’s earth and activated carbon. Indian Chemical Engineering, 49, 196–204. Suche in Google Scholar
[22] Paleos, C. M., Tsiourvas, D., & Sideratou, Z. (2007). Molecular engineering of dendritic polymers and their application as drug and gene delivery systems. Molecular Pharmaceutics, 4, 169–188. DOI: 10.1021/mp060076n. http://dx.doi.org/10.1021/mp060076n10.1021/mp060076nSuche in Google Scholar
[23] Patri, A. K., Majoros, I. J., & Baker, J. R., Jr. (2002). Dendritic polymer macromolecular carriers for drug delivery. Current Opinion in Chemical Biology, 6, 466–471. DOI: 10.1016/S1367-5931(02)00347-2. http://dx.doi.org/10.1016/S1367-5931(02)00347-210.1016/S1367-5931(02)00347-2Suche in Google Scholar
[24] Rothstein, S. N., Federspiel, W. J., & Little, S. R. (2009). A unified mathematical model for the prediction of controlled release from surface and bulk eroding polymer matrices. Biomaterials, 30, 1657–1664. DOI: 10.1016/j.biomaterials.2008. 12.002. http://dx.doi.org/10.1016/j.biomaterials.2008.12.00210.1016/j.biomaterials.2008.12.002Suche in Google Scholar PubMed PubMed Central
[25] Siepmann, F., Eckart, K., Maschke, A., Kolter, K., & Siepmann, J. (2010). Modeling drug release from PVAc/PVP matrix tablets. Journal of Controlled Release, 141, 216–222. DOI: 10.1016/j.jconrel.2009.08.027. http://dx.doi.org/10.1016/j.jconrel.2009.08.02710.1016/j.jconrel.2009.08.027Suche in Google Scholar PubMed
[26] Stein, A., Melde, B. J., & Schroden, R. C. (2000). Hybrid inorganic-organic mesoporous silicates-Nanoscopic reactors coming of age. Advanced Materials, 12, 1403–1419. DOI: 10.1002/1521-4095(200010)12:19〈1403::AID-ADMA1403〉3.0.CO;2-X. http://dx.doi.org/10.1002/1521-4095(200010)12:19<1403::AID-ADMA1403>3.0.CO;2-X10.1002/1521-4095(200010)12:19<1403::AID-ADMA1403>3.0.CO;2-XSuche in Google Scholar
[27] Tomalia, D. A., Reyna, L. A., & Svenson, S. (2007). Dendrimers as multi-purpose nanodevices for oncology drug delivery and diagnostic imaging. Biochemical Society Transactions, 35, 61–67. DOI: 10.1042/BST0350061. http://dx.doi.org/10.1042/BST035006110.1042/BST0350061Suche in Google Scholar
[28] Vergnaud, J.-M., & Rosca, I.-D. (2005). Assessing bioavailability of drug delivery systems: Mathematical Modeling. Boca Raton, FL, USA: CRC Taylor & Francis. 10.1201/9780849330445Suche in Google Scholar
[29] Yang, H., & Kao, W. J. (2006). Dendrimers for pharmaceutical and biomedical applications. Journal of Biomaterials Science, Polymer Edition, 17, 3–19. DOI: 10.1163/156856206774 879171. http://dx.doi.org/10.1163/15685620677487917110.1163/156856206774879171Suche in Google Scholar
[30] Wang, S. (2009). Ordered mesoporous materials for drug delivery. Microporous and Mesoporous Materials, 117, 1–9. DOI: 10.1016/j.micromeso.2008.07.002. http://dx.doi.org/10.1016/j.micromeso.2008.07.00210.1016/j.micromeso.2008.07.002Suche in Google Scholar
[31] Winzenburg, G., Schmidt, C., Fuchs, S., & Kissel, T. (2004). Biodegradable polymers and their potential use in parenteral veterinary drug delivery systems. Advanced Drug Delivery Reviews, 56, 1453–1466. DOI: 10.1016/j.addr.2004.02.008. http://dx.doi.org/10.1016/j.addr.2004.02.00810.1016/j.addr.2004.02.008Suche in Google Scholar
[32] Wu, Z., Joo, H., Lee, T. G., & Lee, K. (2005). Controlled release of lidocaine hydrochloride from the surfactant-doped hybrid xerogels. Journal of Controlled Release, 104, 497–505. DOI: 10.1016/j.jconrel.2005.02.023. http://dx.doi.org/10.1016/j.jconrel.2005.02.02310.1016/j.jconrel.2005.02.023Suche in Google Scholar
[33] Zhang, W., Tichy, S. E., Pérez, L. M., Maria, G. C., Lindahl, P. A., & Simanek, E. E. (2003). Evaluation of multivalent dendrimers based on melamine. Kinetics of dithiothreitolmediated thiol-disulfide exchange depends on the structure of the dendrimer. Journal of the American Chemical Society, 125, 5086–5094. DOI: 10.1021/ja0210906. http://dx.doi.org/10.1021/ja021090610.1021/ja0210906Suche in Google Scholar
© 2011 Institute of Chemistry, Slovak Academy of Sciences
Artikel in diesem Heft
- Lipid retention of novel pressurized extraction vessels as a function of the number of static and flushing cycles, flush volume, and flow rate
- Determination of curcuminoids in substances and dosage forms by cyclodextrin-mediated capillary electrophoresis with diode array detection
- Interaction of Moringa oleifera seed lectin with humic acid
- Hybrid process scheme for the synthesis of ethyl lactate: conceptual design and analysis
- Zinc catalyst recycling in the preparation of (all-rac)-α-tocopherol from trimethylhydroquinone and isophytol
- Denitrification of simulated nitrate-rich wastewater using sulfamic acid and zinc scrap
- Anaerobic treatment of biodiesel by-products in a pilot scale reactor
- Preparation of magnesium hydroxide from nitrate aqueous solution
- Impact of the type of anodic film formed and deposition time on the characteristics of porous anodic aluminium oxide films containing Ni metal
- Synthesis and crystal and molecular structures of N,N′-methylenedipyridinium tetrachlorozincate(II) and N,N′-methylenedipyridinium tetrachlorocadmate(II)
- Effects of denaturing acid on the self-association behaviour of poly(ethylene glycol)-block-poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) copolymer in ethanol
- Properties of poly(γ-benzyl l-glutamate) membrane modified by polyurethane containing carboxyl group
- Theoretical thermo-optical patterns relevant to glass crystallisation
- Morphology dependence of 1,2-diphenylethylenediamine-derived organogelator templates in solvents and their influence in the production of nanostructured silica
- Ferric hydrogensulphate as a recyclable catalyst for the synthesis of fluorescein derivatives
- An alternative synthetic process of p-acetaminobenzenesulfonyl chloride through combined chlorosulfonation by HClSO3 and PCl5
- An efficient and novel one-pot synthesis of 2,4,5-triaryl-1H-imidazoles catalyzed by UO2(NO3)2·6H2O under heterogeneous conditions
- Stereoselective synthesis of the polar part of mycestericins E and G
- A regio- and stereoselective three-component synthesis of 5-(trifluoromethyl)-4,5,6,7-tetrahydro-[1,2,4]triazolo[1,5-a]pyrimidine derivatives under solvent-free conditions
- Precautions in using global kinetic and thermodynamic models for characterization of drug release from multivalent supports
- A sandwich anion receptor by a BODIPY dye bearing two calix[4]pyrrole units
- What causes iron-sulphur bonds in active sites of one-iron superoxide reductase and two-iron superoxide reductase to differ?
- MTD-PLS and docking study for a series of substituted 2-phenylindole derivatives with oestrogenic activity
Artikel in diesem Heft
- Lipid retention of novel pressurized extraction vessels as a function of the number of static and flushing cycles, flush volume, and flow rate
- Determination of curcuminoids in substances and dosage forms by cyclodextrin-mediated capillary electrophoresis with diode array detection
- Interaction of Moringa oleifera seed lectin with humic acid
- Hybrid process scheme for the synthesis of ethyl lactate: conceptual design and analysis
- Zinc catalyst recycling in the preparation of (all-rac)-α-tocopherol from trimethylhydroquinone and isophytol
- Denitrification of simulated nitrate-rich wastewater using sulfamic acid and zinc scrap
- Anaerobic treatment of biodiesel by-products in a pilot scale reactor
- Preparation of magnesium hydroxide from nitrate aqueous solution
- Impact of the type of anodic film formed and deposition time on the characteristics of porous anodic aluminium oxide films containing Ni metal
- Synthesis and crystal and molecular structures of N,N′-methylenedipyridinium tetrachlorozincate(II) and N,N′-methylenedipyridinium tetrachlorocadmate(II)
- Effects of denaturing acid on the self-association behaviour of poly(ethylene glycol)-block-poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) copolymer in ethanol
- Properties of poly(γ-benzyl l-glutamate) membrane modified by polyurethane containing carboxyl group
- Theoretical thermo-optical patterns relevant to glass crystallisation
- Morphology dependence of 1,2-diphenylethylenediamine-derived organogelator templates in solvents and their influence in the production of nanostructured silica
- Ferric hydrogensulphate as a recyclable catalyst for the synthesis of fluorescein derivatives
- An alternative synthetic process of p-acetaminobenzenesulfonyl chloride through combined chlorosulfonation by HClSO3 and PCl5
- An efficient and novel one-pot synthesis of 2,4,5-triaryl-1H-imidazoles catalyzed by UO2(NO3)2·6H2O under heterogeneous conditions
- Stereoselective synthesis of the polar part of mycestericins E and G
- A regio- and stereoselective three-component synthesis of 5-(trifluoromethyl)-4,5,6,7-tetrahydro-[1,2,4]triazolo[1,5-a]pyrimidine derivatives under solvent-free conditions
- Precautions in using global kinetic and thermodynamic models for characterization of drug release from multivalent supports
- A sandwich anion receptor by a BODIPY dye bearing two calix[4]pyrrole units
- What causes iron-sulphur bonds in active sites of one-iron superoxide reductase and two-iron superoxide reductase to differ?
- MTD-PLS and docking study for a series of substituted 2-phenylindole derivatives with oestrogenic activity
