Phenomenology of NOx Adsorber Catalysts
-
C.Stuart Daw
, Katey E Lenox , Kalyana Chakravarthy , William E Epling und Greg Campbell
Abstract
Lean phase operation of lean NOx adsorbers or lean NOx traps (LNTs) is analyzed using data from highly controlled isothermal bench-flow experiments on Pt/K/Al2O3 catalysts. Simulated diesel exhaust was used for inflow in the experiments. Pt promotes the oxidation of NO, the primary component of engine-out NOx, to NO2 which is more easily adsorbed and stored as KNO3. While the presence of Pt was found to be essential for capturing the NOx from the exhaust, it was seen that the NOx storage efficiency did not increase indefinitely with increasing Pt loading. Pt loading at a given temperature of operation is optimal when the rate of NO oxidation to NO2 is nearly equal to the NO2 adsorption rate at the sorbent sites. The NOx storage efficiency seems to be kinetically limited at lower temperatures and equilibrium limited at higher temperatures. When the lean/NOx capture operation was started from a fully regenerated condition, the NOx storage efficiency under most conditions was found to be independent of the reductant mixture used for regenerating the catalyst. The experiments also indicate the possibility of a significant NOx reduction reaction even under the highly oxidizing conditions. This reduction reaction seems to be of fractional order and is more significant at lower temperatures. More detailed analysis of the outflow from the reactor using Fourier-Transform-Infrared (FTIR) spectroscopy is being planned to identify the final product of this reduction reaction.
©2011 Walter de Gruyter GmbH & Co. KG, Berlin/Boston
Artikel in diesem Heft
- Review
- Applications of Liquid-Solid Fluidization
- Applications of the Non-Dominated Sorting Genetic Algorithm (NSGA) in Chemical Reaction Engineering
- Transport and Reaction Processes in Bioremediation of Organic Contaminants. 1. Review of Bacterial Degradation and Transport
- Catalysis Engineering on Three Levels
- Pressure Effects on Gas-Solid Fluidized Bed Behavior
- Recent Research in Catalytic Inorganic Membrane Reactors
- Some Aspects of the Hydrodynamics of Bubble Columns
- Article
- Numerical Convection Algorithms and Their Role in Eulerian CFD Reactor Simulations
- Modeling of Autothermal Steam Methane Reforming in a Fluidized Bed Membrane Reactor
- Application of Computational Fluid Dynamics to Multiphase Flow in Bubble Columns
- Modeling of the Catalytic Distillation Process for the Synthesis of Ethyl Cellosolve Using A Three-Phase Nonequilibrium Model
- CFD Simulations of Gas Fluidized Beds Using Alternative Eulerian-Eulerian Modelling Approaches
- Diffusion Resistances and Contribution of Surface Diffusion in TAME and TAEE Production Using Amberlyst-15
- Kinetic Evaluation of Carbon Formation in Steam/CO2-Natural Gas Reformers. Influence of the Catalyst Activity and Alkalinity
- Valorization of Polyolefin/LCO Blend over HZSM-5 Zeolites
- Modeling of Membrane Reactor
- Chemical Kinetics in Dispersed-Phase Reactors
- Influence of the Sulfur Poisoning on the Performance of a Primary Steam Reformer
- Performance Enhancement of Photocatalytic Reactor Utilizing Flow Instability
- Optimization of Styrene Reactor Design for Two Objectives using a Genetic Algorithm
- Market Demand versus Technological Development: the Future of Chemical Engineering
- Influence of Particle Properties on the Yield and Selectivity of Fast Heterogeneously Catalyzed Gas-Liquid Reactions
- Estimation of Cumene Cracking Reaction-Diffusion Model Parameters: Uniqueness and Parametric Sensitivity Analysis
- A Real Time Toxicity Bioassay for Activated Sludge Reactor
- Simulation of Cold Flow FCC Stripper Hydrodynamics at Small Scale Using Computational Fluid Dynamics
- Transport and Reaction Processes in Bioremediation of Organic Contaminants. 2. Role of Aggregate Size in Soil Remediation in a Slurry Bioreactor
- Simulations of Reacting Fluidized Beds Using an Agent-Based Bubble Model
- Bubble Size Reduction in a Fluidized Bed by Electric Fields
- CFD Simulation of Reaction and Heat Transfer Near the Wall of a Fixed Bed
- Memory Based Local Learning: Application to Process Engineering Problems
- Phenomenology of NOx Adsorber Catalysts
- Optimization of Steam Reformers: Heat Flux Distribution and Carbon Formation
- Numerical Study of the Influence of Horizontal Tube Banks on the Hydrodynamics of a Dense Gas-Solid Bubbling Fluidized Bed
- Bifunctional Redox Scrubbing of Hydrogen Sulphide in Ferric Chelate Solutions - Reaction-Transport Model for Randomly Packed-Bed Scrubbers for Pulp and Paper Effluents
- NOx Emission in In-line Low-NOx Calciners - A Theoretical Study
- Development of a Catalytic Candle Filter for One-Step Tar and Particle Removal in Biomass Gasification Gas
- Bubble Behaviour in Three Phase Capillary Microreactors
- Eulerian/Eulerian CFD Simulation of a Cold Flowing FCC Riser
- Nonlinear Bubbling Hydrodynamics in a Gas-Liquid Bubble Column with a Single Nozzle
- Combating Deactivation in Methane Non-Oxidative Dehydrocyclization via Hydrogen Feed Pulsing
- Photobioreactor Stability by Phase Plane Technique Applied to Spirulina Maxima Growth
- Measurement of Efficiency of Distribution of Liquid Feed in a Gas-Solid Fluidized Bed Reactor
- Adsorption Competition Effects in Hydroconversion of Alkane Mixtures on Zeolites
- Low-Carbon Monoxide Hydrogen by Sorption-Enhanced Reaction
- A Simulation Model for the Growth of Engineered Cartilage on Polymeric Scaffolds
- Disinfecting E.coli Bacteria In Drinking Water Using A Novel Fluidized Bed Reactor.
- Towards Improved Reaction Runaway Assessment Methods I. Simple Calorimetric Method Of Evaluation Of Heat Transfer Coefficient And Reactor Thermal Mass
- Numerical Analysis of a Reacting Gas/Solid Flow in the Riser Section of an Industrial Fluid Catalytic Cracking Unit
- Tertiary Butyl Mercaptan Adsorption in Soils. Determination of Kinetic and Transport Parameters from Experimental Data
- Formulation of Reduced-Order Models for the Dynamic and Stability Analyses of Autothermal Radial Flow Reactors
- Gas Dispersion and Bubble-to-Emulsion Phase Mass Exchange in a Gas-Solid Bubbling Fluidized Bed: A Computational and Experimental Study
- Simulation and Design of a Non-adiabatic Multiphase Microreactor
- Reactive Hydrogen Content: A Tool to Predict FCC Yields
- Kinetics and Equilibrium of Cadmium Biosorption by Yeast Cells S. cerevisiae and K. fragilis
- 2D and 3D CFD Simulations of Bubbling Fluidized Beds Using Eulerian-Eulerian Models
- Detection and Modeling of the Core-Annulus Transition in Industrial and Pilot Plant Risers
- Modeling Fluid Catalytic Cracking in a Novel CREC Riser Simulator: Adsorption Parameters under Reaction Conditions
- Hydrodynamic Modeling of CFB Risers and Downers
- The CREC Fluidized Riser Simulator. Characterization of Mixing Patterns
- Use of Different Numerical Solution Approaches for a Three-Phase Slurry Catalytic Reactor Model
- Modelling of a Reverse Flow Catalytic Membrane Reactor for the Partial Oxidation of Methane
- Analysis of the Microscopic Flow Structure of a CFB Downer Reactor Using Solids Concentration Signals
- Digital X-ray Imaging Technique to Study the Horizontal Injection of Gas-Liquid Jets into Fluidized Beds
- An Engineering Model for the Scale-Up and Design of Photocatalytic Reactors
- Optimal Catalyst Distribution in Catalytic Plate Reactors
- Numerical Investigation for Optimal Phase Holdup of a Continuous Reactor for Hydrogenation of Nitrile Butadiene Rubber
- Entrainment and Stability of a Horizontal Gas-Liquid Jet in a Fluidized Bed
- Conference Presentation
- Modelling of Fluidized Bed Reactors
- Short Communication or Note
- Radial Distribution of Liquid Velocity in a Liquid-Solids Circulating Fluidized Bed
- Theoretical Analysis of Fluidized-Bed Reactor for Dimethyl Ether Synthesis from Syngas
- Gas Holdup Characteristics in a Tapered Bubble Column
- Catalytic Wet Oxidation of Acrylic Acid: Studies with Manganese-based Oxides
- Kinetics of Synthesis of Perfumery Grade p-tert-Butylcyclohexyl Acetate Over Ion Exchange Resin Catalyst
- Kinetic Study of Batch Biodegradation of Diapers
Artikel in diesem Heft
- Review
- Applications of Liquid-Solid Fluidization
- Applications of the Non-Dominated Sorting Genetic Algorithm (NSGA) in Chemical Reaction Engineering
- Transport and Reaction Processes in Bioremediation of Organic Contaminants. 1. Review of Bacterial Degradation and Transport
- Catalysis Engineering on Three Levels
- Pressure Effects on Gas-Solid Fluidized Bed Behavior
- Recent Research in Catalytic Inorganic Membrane Reactors
- Some Aspects of the Hydrodynamics of Bubble Columns
- Article
- Numerical Convection Algorithms and Their Role in Eulerian CFD Reactor Simulations
- Modeling of Autothermal Steam Methane Reforming in a Fluidized Bed Membrane Reactor
- Application of Computational Fluid Dynamics to Multiphase Flow in Bubble Columns
- Modeling of the Catalytic Distillation Process for the Synthesis of Ethyl Cellosolve Using A Three-Phase Nonequilibrium Model
- CFD Simulations of Gas Fluidized Beds Using Alternative Eulerian-Eulerian Modelling Approaches
- Diffusion Resistances and Contribution of Surface Diffusion in TAME and TAEE Production Using Amberlyst-15
- Kinetic Evaluation of Carbon Formation in Steam/CO2-Natural Gas Reformers. Influence of the Catalyst Activity and Alkalinity
- Valorization of Polyolefin/LCO Blend over HZSM-5 Zeolites
- Modeling of Membrane Reactor
- Chemical Kinetics in Dispersed-Phase Reactors
- Influence of the Sulfur Poisoning on the Performance of a Primary Steam Reformer
- Performance Enhancement of Photocatalytic Reactor Utilizing Flow Instability
- Optimization of Styrene Reactor Design for Two Objectives using a Genetic Algorithm
- Market Demand versus Technological Development: the Future of Chemical Engineering
- Influence of Particle Properties on the Yield and Selectivity of Fast Heterogeneously Catalyzed Gas-Liquid Reactions
- Estimation of Cumene Cracking Reaction-Diffusion Model Parameters: Uniqueness and Parametric Sensitivity Analysis
- A Real Time Toxicity Bioassay for Activated Sludge Reactor
- Simulation of Cold Flow FCC Stripper Hydrodynamics at Small Scale Using Computational Fluid Dynamics
- Transport and Reaction Processes in Bioremediation of Organic Contaminants. 2. Role of Aggregate Size in Soil Remediation in a Slurry Bioreactor
- Simulations of Reacting Fluidized Beds Using an Agent-Based Bubble Model
- Bubble Size Reduction in a Fluidized Bed by Electric Fields
- CFD Simulation of Reaction and Heat Transfer Near the Wall of a Fixed Bed
- Memory Based Local Learning: Application to Process Engineering Problems
- Phenomenology of NOx Adsorber Catalysts
- Optimization of Steam Reformers: Heat Flux Distribution and Carbon Formation
- Numerical Study of the Influence of Horizontal Tube Banks on the Hydrodynamics of a Dense Gas-Solid Bubbling Fluidized Bed
- Bifunctional Redox Scrubbing of Hydrogen Sulphide in Ferric Chelate Solutions - Reaction-Transport Model for Randomly Packed-Bed Scrubbers for Pulp and Paper Effluents
- NOx Emission in In-line Low-NOx Calciners - A Theoretical Study
- Development of a Catalytic Candle Filter for One-Step Tar and Particle Removal in Biomass Gasification Gas
- Bubble Behaviour in Three Phase Capillary Microreactors
- Eulerian/Eulerian CFD Simulation of a Cold Flowing FCC Riser
- Nonlinear Bubbling Hydrodynamics in a Gas-Liquid Bubble Column with a Single Nozzle
- Combating Deactivation in Methane Non-Oxidative Dehydrocyclization via Hydrogen Feed Pulsing
- Photobioreactor Stability by Phase Plane Technique Applied to Spirulina Maxima Growth
- Measurement of Efficiency of Distribution of Liquid Feed in a Gas-Solid Fluidized Bed Reactor
- Adsorption Competition Effects in Hydroconversion of Alkane Mixtures on Zeolites
- Low-Carbon Monoxide Hydrogen by Sorption-Enhanced Reaction
- A Simulation Model for the Growth of Engineered Cartilage on Polymeric Scaffolds
- Disinfecting E.coli Bacteria In Drinking Water Using A Novel Fluidized Bed Reactor.
- Towards Improved Reaction Runaway Assessment Methods I. Simple Calorimetric Method Of Evaluation Of Heat Transfer Coefficient And Reactor Thermal Mass
- Numerical Analysis of a Reacting Gas/Solid Flow in the Riser Section of an Industrial Fluid Catalytic Cracking Unit
- Tertiary Butyl Mercaptan Adsorption in Soils. Determination of Kinetic and Transport Parameters from Experimental Data
- Formulation of Reduced-Order Models for the Dynamic and Stability Analyses of Autothermal Radial Flow Reactors
- Gas Dispersion and Bubble-to-Emulsion Phase Mass Exchange in a Gas-Solid Bubbling Fluidized Bed: A Computational and Experimental Study
- Simulation and Design of a Non-adiabatic Multiphase Microreactor
- Reactive Hydrogen Content: A Tool to Predict FCC Yields
- Kinetics and Equilibrium of Cadmium Biosorption by Yeast Cells S. cerevisiae and K. fragilis
- 2D and 3D CFD Simulations of Bubbling Fluidized Beds Using Eulerian-Eulerian Models
- Detection and Modeling of the Core-Annulus Transition in Industrial and Pilot Plant Risers
- Modeling Fluid Catalytic Cracking in a Novel CREC Riser Simulator: Adsorption Parameters under Reaction Conditions
- Hydrodynamic Modeling of CFB Risers and Downers
- The CREC Fluidized Riser Simulator. Characterization of Mixing Patterns
- Use of Different Numerical Solution Approaches for a Three-Phase Slurry Catalytic Reactor Model
- Modelling of a Reverse Flow Catalytic Membrane Reactor for the Partial Oxidation of Methane
- Analysis of the Microscopic Flow Structure of a CFB Downer Reactor Using Solids Concentration Signals
- Digital X-ray Imaging Technique to Study the Horizontal Injection of Gas-Liquid Jets into Fluidized Beds
- An Engineering Model for the Scale-Up and Design of Photocatalytic Reactors
- Optimal Catalyst Distribution in Catalytic Plate Reactors
- Numerical Investigation for Optimal Phase Holdup of a Continuous Reactor for Hydrogenation of Nitrile Butadiene Rubber
- Entrainment and Stability of a Horizontal Gas-Liquid Jet in a Fluidized Bed
- Conference Presentation
- Modelling of Fluidized Bed Reactors
- Short Communication or Note
- Radial Distribution of Liquid Velocity in a Liquid-Solids Circulating Fluidized Bed
- Theoretical Analysis of Fluidized-Bed Reactor for Dimethyl Ether Synthesis from Syngas
- Gas Holdup Characteristics in a Tapered Bubble Column
- Catalytic Wet Oxidation of Acrylic Acid: Studies with Manganese-based Oxides
- Kinetics of Synthesis of Perfumery Grade p-tert-Butylcyclohexyl Acetate Over Ion Exchange Resin Catalyst
- Kinetic Study of Batch Biodegradation of Diapers