Development of a Catalytic Candle Filter for One-Step Tar and Particle Removal in Biomass Gasification Gas
-
Karen Engelen
, Yuhong Zhang und Gino V Baron
Abstract
Renewable energy generation from biomass (e.g. wood, agricultural wastes) by gasification is attractive because it can be used for efficient energy production on both small and large scale. Unfortunately, biomass gasification gas contains unwanted impurities, such as condensable tars and ash particles that need to be removed to avoid damaging of the downstream equipment.This work reports on the performance of a novel catalytic candle filter for the integrated high temperature removal of tars and particles from the biomass gasification gas. The catalytic candle filters that are under development are alumina ceramic filters that contain a suitable nickel-based tar cracking catalyst in their pores. This not only avoids mass transfer limitations occurring in packed beds of such catalysts, but also yields a reduced investment cost for the cleanup step.Different nickel-based catalysts have been developed and impregnated in the pores of the alumina support. Nickel is efficient for tar removal, but is sensitive to sulfur poisoning by the biomass gasification gas that typically contains 20-200 ppm H2S. To enhance the resistance to sulfur poisoning CaO or MgO was added to the nickel and also the number of active nickel sites was increased by the deposition of a highly dispersed secondary alumina layer in the large pores of the primary support.Small-scale porous alumina filter discs were tested on their sulfur poisoning resistance under lab conditions using a simulated biomass gasification gas containing benzene and naphthalene as model compounds. At typical conditions, such as a filtration velocity of 2.5 cm/s and a H2S-content of 100 ppm, naphthalene conversions of 99.89% were obtained with a Ni/MgO-activated filter disc with increased surface of the support.
©2011 Walter de Gruyter GmbH & Co. KG, Berlin/Boston
Artikel in diesem Heft
- Review
- Applications of Liquid-Solid Fluidization
- Applications of the Non-Dominated Sorting Genetic Algorithm (NSGA) in Chemical Reaction Engineering
- Transport and Reaction Processes in Bioremediation of Organic Contaminants. 1. Review of Bacterial Degradation and Transport
- Catalysis Engineering on Three Levels
- Pressure Effects on Gas-Solid Fluidized Bed Behavior
- Recent Research in Catalytic Inorganic Membrane Reactors
- Some Aspects of the Hydrodynamics of Bubble Columns
- Article
- Numerical Convection Algorithms and Their Role in Eulerian CFD Reactor Simulations
- Modeling of Autothermal Steam Methane Reforming in a Fluidized Bed Membrane Reactor
- Application of Computational Fluid Dynamics to Multiphase Flow in Bubble Columns
- Modeling of the Catalytic Distillation Process for the Synthesis of Ethyl Cellosolve Using A Three-Phase Nonequilibrium Model
- CFD Simulations of Gas Fluidized Beds Using Alternative Eulerian-Eulerian Modelling Approaches
- Diffusion Resistances and Contribution of Surface Diffusion in TAME and TAEE Production Using Amberlyst-15
- Kinetic Evaluation of Carbon Formation in Steam/CO2-Natural Gas Reformers. Influence of the Catalyst Activity and Alkalinity
- Valorization of Polyolefin/LCO Blend over HZSM-5 Zeolites
- Modeling of Membrane Reactor
- Chemical Kinetics in Dispersed-Phase Reactors
- Influence of the Sulfur Poisoning on the Performance of a Primary Steam Reformer
- Performance Enhancement of Photocatalytic Reactor Utilizing Flow Instability
- Optimization of Styrene Reactor Design for Two Objectives using a Genetic Algorithm
- Market Demand versus Technological Development: the Future of Chemical Engineering
- Influence of Particle Properties on the Yield and Selectivity of Fast Heterogeneously Catalyzed Gas-Liquid Reactions
- Estimation of Cumene Cracking Reaction-Diffusion Model Parameters: Uniqueness and Parametric Sensitivity Analysis
- A Real Time Toxicity Bioassay for Activated Sludge Reactor
- Simulation of Cold Flow FCC Stripper Hydrodynamics at Small Scale Using Computational Fluid Dynamics
- Transport and Reaction Processes in Bioremediation of Organic Contaminants. 2. Role of Aggregate Size in Soil Remediation in a Slurry Bioreactor
- Simulations of Reacting Fluidized Beds Using an Agent-Based Bubble Model
- Bubble Size Reduction in a Fluidized Bed by Electric Fields
- CFD Simulation of Reaction and Heat Transfer Near the Wall of a Fixed Bed
- Memory Based Local Learning: Application to Process Engineering Problems
- Phenomenology of NOx Adsorber Catalysts
- Optimization of Steam Reformers: Heat Flux Distribution and Carbon Formation
- Numerical Study of the Influence of Horizontal Tube Banks on the Hydrodynamics of a Dense Gas-Solid Bubbling Fluidized Bed
- Bifunctional Redox Scrubbing of Hydrogen Sulphide in Ferric Chelate Solutions - Reaction-Transport Model for Randomly Packed-Bed Scrubbers for Pulp and Paper Effluents
- NOx Emission in In-line Low-NOx Calciners - A Theoretical Study
- Development of a Catalytic Candle Filter for One-Step Tar and Particle Removal in Biomass Gasification Gas
- Bubble Behaviour in Three Phase Capillary Microreactors
- Eulerian/Eulerian CFD Simulation of a Cold Flowing FCC Riser
- Nonlinear Bubbling Hydrodynamics in a Gas-Liquid Bubble Column with a Single Nozzle
- Combating Deactivation in Methane Non-Oxidative Dehydrocyclization via Hydrogen Feed Pulsing
- Photobioreactor Stability by Phase Plane Technique Applied to Spirulina Maxima Growth
- Measurement of Efficiency of Distribution of Liquid Feed in a Gas-Solid Fluidized Bed Reactor
- Adsorption Competition Effects in Hydroconversion of Alkane Mixtures on Zeolites
- Low-Carbon Monoxide Hydrogen by Sorption-Enhanced Reaction
- A Simulation Model for the Growth of Engineered Cartilage on Polymeric Scaffolds
- Disinfecting E.coli Bacteria In Drinking Water Using A Novel Fluidized Bed Reactor.
- Towards Improved Reaction Runaway Assessment Methods I. Simple Calorimetric Method Of Evaluation Of Heat Transfer Coefficient And Reactor Thermal Mass
- Numerical Analysis of a Reacting Gas/Solid Flow in the Riser Section of an Industrial Fluid Catalytic Cracking Unit
- Tertiary Butyl Mercaptan Adsorption in Soils. Determination of Kinetic and Transport Parameters from Experimental Data
- Formulation of Reduced-Order Models for the Dynamic and Stability Analyses of Autothermal Radial Flow Reactors
- Gas Dispersion and Bubble-to-Emulsion Phase Mass Exchange in a Gas-Solid Bubbling Fluidized Bed: A Computational and Experimental Study
- Simulation and Design of a Non-adiabatic Multiphase Microreactor
- Reactive Hydrogen Content: A Tool to Predict FCC Yields
- Kinetics and Equilibrium of Cadmium Biosorption by Yeast Cells S. cerevisiae and K. fragilis
- 2D and 3D CFD Simulations of Bubbling Fluidized Beds Using Eulerian-Eulerian Models
- Detection and Modeling of the Core-Annulus Transition in Industrial and Pilot Plant Risers
- Modeling Fluid Catalytic Cracking in a Novel CREC Riser Simulator: Adsorption Parameters under Reaction Conditions
- Hydrodynamic Modeling of CFB Risers and Downers
- The CREC Fluidized Riser Simulator. Characterization of Mixing Patterns
- Use of Different Numerical Solution Approaches for a Three-Phase Slurry Catalytic Reactor Model
- Modelling of a Reverse Flow Catalytic Membrane Reactor for the Partial Oxidation of Methane
- Analysis of the Microscopic Flow Structure of a CFB Downer Reactor Using Solids Concentration Signals
- Digital X-ray Imaging Technique to Study the Horizontal Injection of Gas-Liquid Jets into Fluidized Beds
- An Engineering Model for the Scale-Up and Design of Photocatalytic Reactors
- Optimal Catalyst Distribution in Catalytic Plate Reactors
- Numerical Investigation for Optimal Phase Holdup of a Continuous Reactor for Hydrogenation of Nitrile Butadiene Rubber
- Entrainment and Stability of a Horizontal Gas-Liquid Jet in a Fluidized Bed
- Conference Presentation
- Modelling of Fluidized Bed Reactors
- Short Communication or Note
- Radial Distribution of Liquid Velocity in a Liquid-Solids Circulating Fluidized Bed
- Theoretical Analysis of Fluidized-Bed Reactor for Dimethyl Ether Synthesis from Syngas
- Gas Holdup Characteristics in a Tapered Bubble Column
- Catalytic Wet Oxidation of Acrylic Acid: Studies with Manganese-based Oxides
- Kinetics of Synthesis of Perfumery Grade p-tert-Butylcyclohexyl Acetate Over Ion Exchange Resin Catalyst
- Kinetic Study of Batch Biodegradation of Diapers
Artikel in diesem Heft
- Review
- Applications of Liquid-Solid Fluidization
- Applications of the Non-Dominated Sorting Genetic Algorithm (NSGA) in Chemical Reaction Engineering
- Transport and Reaction Processes in Bioremediation of Organic Contaminants. 1. Review of Bacterial Degradation and Transport
- Catalysis Engineering on Three Levels
- Pressure Effects on Gas-Solid Fluidized Bed Behavior
- Recent Research in Catalytic Inorganic Membrane Reactors
- Some Aspects of the Hydrodynamics of Bubble Columns
- Article
- Numerical Convection Algorithms and Their Role in Eulerian CFD Reactor Simulations
- Modeling of Autothermal Steam Methane Reforming in a Fluidized Bed Membrane Reactor
- Application of Computational Fluid Dynamics to Multiphase Flow in Bubble Columns
- Modeling of the Catalytic Distillation Process for the Synthesis of Ethyl Cellosolve Using A Three-Phase Nonequilibrium Model
- CFD Simulations of Gas Fluidized Beds Using Alternative Eulerian-Eulerian Modelling Approaches
- Diffusion Resistances and Contribution of Surface Diffusion in TAME and TAEE Production Using Amberlyst-15
- Kinetic Evaluation of Carbon Formation in Steam/CO2-Natural Gas Reformers. Influence of the Catalyst Activity and Alkalinity
- Valorization of Polyolefin/LCO Blend over HZSM-5 Zeolites
- Modeling of Membrane Reactor
- Chemical Kinetics in Dispersed-Phase Reactors
- Influence of the Sulfur Poisoning on the Performance of a Primary Steam Reformer
- Performance Enhancement of Photocatalytic Reactor Utilizing Flow Instability
- Optimization of Styrene Reactor Design for Two Objectives using a Genetic Algorithm
- Market Demand versus Technological Development: the Future of Chemical Engineering
- Influence of Particle Properties on the Yield and Selectivity of Fast Heterogeneously Catalyzed Gas-Liquid Reactions
- Estimation of Cumene Cracking Reaction-Diffusion Model Parameters: Uniqueness and Parametric Sensitivity Analysis
- A Real Time Toxicity Bioassay for Activated Sludge Reactor
- Simulation of Cold Flow FCC Stripper Hydrodynamics at Small Scale Using Computational Fluid Dynamics
- Transport and Reaction Processes in Bioremediation of Organic Contaminants. 2. Role of Aggregate Size in Soil Remediation in a Slurry Bioreactor
- Simulations of Reacting Fluidized Beds Using an Agent-Based Bubble Model
- Bubble Size Reduction in a Fluidized Bed by Electric Fields
- CFD Simulation of Reaction and Heat Transfer Near the Wall of a Fixed Bed
- Memory Based Local Learning: Application to Process Engineering Problems
- Phenomenology of NOx Adsorber Catalysts
- Optimization of Steam Reformers: Heat Flux Distribution and Carbon Formation
- Numerical Study of the Influence of Horizontal Tube Banks on the Hydrodynamics of a Dense Gas-Solid Bubbling Fluidized Bed
- Bifunctional Redox Scrubbing of Hydrogen Sulphide in Ferric Chelate Solutions - Reaction-Transport Model for Randomly Packed-Bed Scrubbers for Pulp and Paper Effluents
- NOx Emission in In-line Low-NOx Calciners - A Theoretical Study
- Development of a Catalytic Candle Filter for One-Step Tar and Particle Removal in Biomass Gasification Gas
- Bubble Behaviour in Three Phase Capillary Microreactors
- Eulerian/Eulerian CFD Simulation of a Cold Flowing FCC Riser
- Nonlinear Bubbling Hydrodynamics in a Gas-Liquid Bubble Column with a Single Nozzle
- Combating Deactivation in Methane Non-Oxidative Dehydrocyclization via Hydrogen Feed Pulsing
- Photobioreactor Stability by Phase Plane Technique Applied to Spirulina Maxima Growth
- Measurement of Efficiency of Distribution of Liquid Feed in a Gas-Solid Fluidized Bed Reactor
- Adsorption Competition Effects in Hydroconversion of Alkane Mixtures on Zeolites
- Low-Carbon Monoxide Hydrogen by Sorption-Enhanced Reaction
- A Simulation Model for the Growth of Engineered Cartilage on Polymeric Scaffolds
- Disinfecting E.coli Bacteria In Drinking Water Using A Novel Fluidized Bed Reactor.
- Towards Improved Reaction Runaway Assessment Methods I. Simple Calorimetric Method Of Evaluation Of Heat Transfer Coefficient And Reactor Thermal Mass
- Numerical Analysis of a Reacting Gas/Solid Flow in the Riser Section of an Industrial Fluid Catalytic Cracking Unit
- Tertiary Butyl Mercaptan Adsorption in Soils. Determination of Kinetic and Transport Parameters from Experimental Data
- Formulation of Reduced-Order Models for the Dynamic and Stability Analyses of Autothermal Radial Flow Reactors
- Gas Dispersion and Bubble-to-Emulsion Phase Mass Exchange in a Gas-Solid Bubbling Fluidized Bed: A Computational and Experimental Study
- Simulation and Design of a Non-adiabatic Multiphase Microreactor
- Reactive Hydrogen Content: A Tool to Predict FCC Yields
- Kinetics and Equilibrium of Cadmium Biosorption by Yeast Cells S. cerevisiae and K. fragilis
- 2D and 3D CFD Simulations of Bubbling Fluidized Beds Using Eulerian-Eulerian Models
- Detection and Modeling of the Core-Annulus Transition in Industrial and Pilot Plant Risers
- Modeling Fluid Catalytic Cracking in a Novel CREC Riser Simulator: Adsorption Parameters under Reaction Conditions
- Hydrodynamic Modeling of CFB Risers and Downers
- The CREC Fluidized Riser Simulator. Characterization of Mixing Patterns
- Use of Different Numerical Solution Approaches for a Three-Phase Slurry Catalytic Reactor Model
- Modelling of a Reverse Flow Catalytic Membrane Reactor for the Partial Oxidation of Methane
- Analysis of the Microscopic Flow Structure of a CFB Downer Reactor Using Solids Concentration Signals
- Digital X-ray Imaging Technique to Study the Horizontal Injection of Gas-Liquid Jets into Fluidized Beds
- An Engineering Model for the Scale-Up and Design of Photocatalytic Reactors
- Optimal Catalyst Distribution in Catalytic Plate Reactors
- Numerical Investigation for Optimal Phase Holdup of a Continuous Reactor for Hydrogenation of Nitrile Butadiene Rubber
- Entrainment and Stability of a Horizontal Gas-Liquid Jet in a Fluidized Bed
- Conference Presentation
- Modelling of Fluidized Bed Reactors
- Short Communication or Note
- Radial Distribution of Liquid Velocity in a Liquid-Solids Circulating Fluidized Bed
- Theoretical Analysis of Fluidized-Bed Reactor for Dimethyl Ether Synthesis from Syngas
- Gas Holdup Characteristics in a Tapered Bubble Column
- Catalytic Wet Oxidation of Acrylic Acid: Studies with Manganese-based Oxides
- Kinetics of Synthesis of Perfumery Grade p-tert-Butylcyclohexyl Acetate Over Ion Exchange Resin Catalyst
- Kinetic Study of Batch Biodegradation of Diapers