Startseite Naturwissenschaften Stability of corundum + quartz relative to kyanite and sillimanite at high temperature and pressure
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Stability of corundum + quartz relative to kyanite and sillimanite at high temperature and pressure

  • Daniel E. Harlov EMAIL logo und Ralf Milke
Veröffentlicht/Copyright: 28. März 2015
Veröffentlichen auch Sie bei De Gruyter Brill

Abstract

Although natural occurrences of corundum + quartz ± aluminosilicate are known, internally consistent thermodynamic databases suggest that they do not represent a stable assemblage. This observation has motivated two sets of experiments. In the first set, the equilibrium kyanite = corundum + quartz has been reversed (±5 °C; ±25 MPa) at 600 °C/320 MPa and 700 °C/535 MPa (externally heated cold-seal hydrothermal autoclaves); 800 °C/775 MPa (gas apparatus; NaCl and CaF2 furnace assemblies, non end-load piston-cylinder press); and at 900 ∞C/1075 MPa and 1000 °C/1325 MPa (CaF2 furnace assembly, non end-load piston-cylinder press). These reversals imply an enthalpy of formation from the elements for kyanite of -2594.75 kJ/mol. The slope of the equilibrium curve also confirms both volume and experimental CP data for kyanite. These reversals can serve as a useful calibration for the piston-cylinder press using NaCl furnace assemblies in the 700-800 ∞C and 500- 1000 MPa range and indicate a friction correction for CaF2 furnace assemblies of 75-100 MPa over 800-1000 °C and 1000-1500 MPa.

The second set of experiments (1200 °C and 2000 MPa) investigated the growth of kyanite along corundum-quartz grain interfaces. In experiments where no fluid was present, except adsorbed H2O, kyanite did not nucleate and grow. In experiments with 2 wt% H2O, kyanite formed and grew preferentially in the pores surrounding the corundum grains parallel to the corundum-quartz interface and along quartz grain boundaries. Due to a large DVR, reaction halos around the corundum grains never become closed to fluid migration. This suggests that in nature, fluids are channeled to these reaction sites via porous reaction halos surrounding the corundum grains and indicates that, under such circumstances, formation of kyanite is self-promoting and probably goes to completion quickly. The stability of sillimanite relative to corundum + quartz is also discussed, from the standpoints of what is predicted by internally consistent mineral databases and what is observed in nature.

Received: 2001-4-9
Accepted: 2001-11-28
Published Online: 2015-3-28
Published in Print: 2002-4-1

© 2015 by Walter de Gruyter Berlin/Boston

Artikel in diesem Heft

  1. Titanium in biotite from metapelitic rocks: Temperature effects, crystal-chemical controls, and petrologic applications
  2. Local equilibrium in polymetamorphic gneiss and the titanium substitution in biotite
  3. The enthalpy of formation and internally consistent thermodynamic data of Mg-staurolite
  4. Coexisting andalusite, kyanite, and sillimanite: Sequential formation of three Al2SiO5 polymorphs during progressive metamorphism near the triple point, Sivrihisar, Turkey
  5. Co-existing aluminum silicates in quartz veins: A quantitative approach for determining andalusite-sillimanite equilibrium in natural samples using oxygen isotopes
  6. Stability of corundum + quartz relative to kyanite and sillimanite at high temperature and pressure
  7. Andalusite-sillimanite replacement (Mazarrón, SE Spain): A microstructural and TEM study
  8. Hydroxyl-rich topaz in high-pressure and ultrahigh-pressure kyanite quartzites, with retrograde woodhouseite, from the Sulu terrane, eastern China
  9. Coesite exsolution from supersilicic titanite in UHP marble from the Kokchetav Massif, northern Kazakhstan
  10. Composition of synthetic tremolite-tschermakite solid solutions in amphibole + anorthiteand amphibole + zoisite-bearing assemblages
  11. Paragenesis and thermobarometry of Ca-amphiboles in the Barcroft granodioritic pluton, central White Mountains, eastern California
  12. B and Li in Proterozoic metapelites from the Black Hills, U.S.A.: Implications for the origin of leucogranitic magmas
  13. The role of Fe and cation order in the crystal chemistry of surinamite, (Mg,Fe2+)3(Al,Fe3+)3O[AlBeSi3O15]: A crystal structure, Mössbauer spectroscopic, and optical spectroscopic study
  14. Fe3+ and Fe2+ partitioning among silicates in metapelites: A synchrotron micro-XANES study
  15. Thermodynamic and structural behavior of analcime–leucite analogue systems
  16. In-situ synchrotron study of the kinetics, thermodynamics, and reaction mechanisms of the hydrothermal crystallization of gyrolite, Ca16Si24O60(OH)8·14H2O
  17. The crystal structures of grossular and spessartine between 100 and 600 K and the crystal chemistry of grossular-spessartine solid solutions
  18. The structures of becquerelite and Sr-exchanged becquerelite
  19. Elasticity and equation of state of orthoenstatite, MgSiO3
  20. Reidite: An impact-produced high-pressure polymorph of zircon found in marine sediments
  21. A new polymorph of eucryptite (LiAlSiO4), ε-eucryptite, and thermal expansion of α- and ε-eucryptite at high pressure
  22. Disordering during melting: An 17O NMR Study of crystalline and glassy CaTiSiO5 (titanite)
  23. Characterization of Mn oxides in cemented streambed crusts from Pinal Creek, Arizona, U.S.A., and in hot-spring deposits from Yuno-Taki Falls, Hokkaido, Japan
Heruntergeladen am 5.2.2026 von https://www.degruyterbrill.com/document/doi/10.2138/am-2002-0406/html
Button zum nach oben scrollen