Home On the Construction of Passive Models from Frequency Response Data (Konstruktion passiver Modelle auf der Basis von Frequenzbereichsdaten)
Article
Licensed
Unlicensed Requires Authentication

On the Construction of Passive Models from Frequency Response Data (Konstruktion passiver Modelle auf der Basis von Frequenzbereichsdaten)

  • Athanasios C. Antoulas
Published/Copyright: September 25, 2009
at - Automatisierungstechnik
From the journal Volume 56 Issue 8

In many situations where linear models need to be fitted to measured data, the requirement arises that the resulting model be stable and passive. One such application is model construction from S-parameter measurements. In this note we present an interpolation based method for the direct construction of stable and passive models from frequency response data.

Bei der Entwicklung linearer Modelle auf der Basis von Messdaten besteht manchmal die Notwendigkeit, dass die Modelle stabile und passive Systeme beschreiben. Dies ist bei der Modellkonstruktion ausgehend von S-Parameter-Messungen der Fall. Es wird eine auf Interpolation beruhende Methode zur direkten Konstruktion stabiler und passiver Modelle auf der Basis von Frequenzbereichsdaten vorgestellt.

:
Published Online: 2009-09-25
Published in Print: 2008-08

© Oldenbourg Wissenschaftsverlag

Downloaded on 17.9.2025 from https://www.degruyterbrill.com/document/doi/10.1524/auto.2008.0722/html
Scroll to top button