Frontmatter

Articles in the same Issue

1. Frontmatter
2. Review
3. A model on the curved shapes of unsymmetric laminates including tool-part interaction
4. Original articles
5. Enhanced catalytic performance of β-FeOOH by coupling with single-walled carbon nanotubes in a visible-light-Fenton-like process
6. Investigation of the microstructure and properties of W75-Cu/W55-Cu brazed joint with Cu-Mn-Co filler metal
7. In situ polymerization approach to poly(arylene ether nitrile)-functionalized multiwalled carbon nanotube composite films: thermal, mechanical, dielectric, and electrical properties
8. Fabrication and characterization properties of polypropylene/polycarbonate/clay nanocomposites prepared with twin-screw extruder
9. Torsional vibration of functionally graded carbon nanotube reinforced conical shells
10. A comparative study performance of cationic organic montmorillonite prepared by different methods
11. Design and analysis with different substrate materials of a new metamaterial for satellite applications
12. An investigation on dry sliding wear behaviour of pressure infiltrated AA1050-XMg/B₄C composites
13. Investigation of mechanical performances of composite bolted joints with local reinforcements
14. Effect of alkali treatment on the flexural properties of a Luffa cylindrica-reinforced epoxy composite
15. Thermal expansion, electrical conductivity and hardness of Mn₃Zn_0.5Sn_0.5N/Al composites
16. Effect of modified layered double hydroxide on the flammability and mechanical properties of polypropylene
17. A unified formulation for free vibration of functionally graded plates
18. Friction-stir welding of aluminum alloy with an iron-based metal as reinforcing material
19. Hybridization effect of coir fiber on physico-mechanical properties of polyethylene-banana/coir fiber hybrid composites
20. Micromechanical properties of unidirectional composites filled with single and clustered shaped fibers
21. Structure and microwave absorbing properties of carbon-filled ultra-high molecular weight polyethylene
22. Investigation and optimization of the electro-discharge machining parameters of 2024 aluminum alloy and Al/7.5% Al₂O₃ particulate-reinforced metal matrix composite
23. Structural behavior of load-bearing sandwich wall panels with GFRP skin and a foam-web core
24. Synthesis, thermal and magnetic behavior of iron oxide-polymer nanocomposites
25. High-temperature damping capacity of fly ash cenosphere/AZ91D Mg alloy composites
26. Investigation of penetration into woven fabric specimens impregnated with shear thickening fluid