Failure assessment of a woven E-glass/vinyl ester composite subjected to large deformation loading

Articles in the same Issue

1. Masthead
2. Masthead
3. Original Articles
4. Characterization of sputtered Al-B-Si thin films produced with composite targets for device applications
5. Aluminum reinforcement by gas tungsten arc welding
6. Formation and characterization of silica-coated HAP particles
7. Mechanical properties and mechanical behavior of (SiO₂)_f/SiO₂ composites with 3D six-directional braided quartz fiber preform
8. Buckling behaviour of cross-ply laminated plates by a higher-order shear deformation theory
9. The effect of multi-directional stiffness degradation on the non-linear analysis of composite laminates
10. Effect of shallow straight-joint braided fabric geometrical parameters on fiber volume fraction
11. Forced vibration of delaminated Timoshenko beams subjected to a moving load
12. Axial behaviour of HSS tubular sections strengthened by CFRP strips: an experimental investigation
13. Determination of displacement and failure loads formed in reinforced concrete construction with overhang and without overhang by ANN modeling
14. Fabrication and characterization of hydroxyapatite/collagen bone-like nanocomposite through a self-assembly method
15. Failure assessment of a woven E-glass/vinyl ester composite subjected to large deformation loading
16. Nanocomposite synthesis by thermolysis of [Ag(hfac)(COD)] in amorphous polystyrene
17. Quantitative evaluation of mineral admixtures on the properties, pore structure, and durability of cement-based composites