Article Open Access

Effect of shallow straight-joint braided fabric geometrical parameters on fiber volume fraction

  • , EMAIL logo , and
Published/Copyright: June 1, 2012
Download Article (PDF)
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Science and Engineering of Composite Materials
From the journal Science and Engineering of Composite Materials Volume 19 Issue 2

Published Online: 2012-06-01
Published in Print: 2012-06-01

©2012 by Walter de Gruyter Berlin Boston

Articles in the same Issue

  1. Masthead
  2. Masthead
  3. Original Articles
  4. Characterization of sputtered Al-B-Si thin films produced with composite targets for device applications
  5. Aluminum reinforcement by gas tungsten arc welding
  6. Formation and characterization of silica-coated HAP particles
  7. Mechanical properties and mechanical behavior of (SiO2)f/SiO2 composites with 3D six-directional braided quartz fiber preform
  8. Buckling behaviour of cross-ply laminated plates by a higher-order shear deformation theory
  9. The effect of multi-directional stiffness degradation on the non-linear analysis of composite laminates
  10. Effect of shallow straight-joint braided fabric geometrical parameters on fiber volume fraction
  11. Forced vibration of delaminated Timoshenko beams subjected to a moving load
  12. Axial behaviour of HSS tubular sections strengthened by CFRP strips: an experimental investigation
  13. Determination of displacement and failure loads formed in reinforced concrete construction with overhang and without overhang by ANN modeling
  14. Fabrication and characterization of hydroxyapatite/collagen bone-like nanocomposite through a self-assembly method
  15. Failure assessment of a woven E-glass/vinyl ester composite subjected to large deformation loading
  16. Nanocomposite synthesis by thermolysis of [Ag(hfac)(COD)] in amorphous polystyrene
  17. Quantitative evaluation of mineral admixtures on the properties, pore structure, and durability of cement-based composites
https://doi.org/10.1515/secm-2011-0121
Keywords for this article
fabric parameter; fiber volume fraction; representative unit cell; 2.5D structure
Creative Commons
BY-NC-ND 3.0

Articles in the same Issue

  1. Masthead
  2. Masthead
  3. Original Articles
  4. Characterization of sputtered Al-B-Si thin films produced with composite targets for device applications
  5. Aluminum reinforcement by gas tungsten arc welding
  6. Formation and characterization of silica-coated HAP particles
  7. Mechanical properties and mechanical behavior of (SiO2)f/SiO2 composites with 3D six-directional braided quartz fiber preform
  8. Buckling behaviour of cross-ply laminated plates by a higher-order shear deformation theory
  9. The effect of multi-directional stiffness degradation on the non-linear analysis of composite laminates
  10. Effect of shallow straight-joint braided fabric geometrical parameters on fiber volume fraction
  11. Forced vibration of delaminated Timoshenko beams subjected to a moving load
  12. Axial behaviour of HSS tubular sections strengthened by CFRP strips: an experimental investigation
  13. Determination of displacement and failure loads formed in reinforced concrete construction with overhang and without overhang by ANN modeling
  14. Fabrication and characterization of hydroxyapatite/collagen bone-like nanocomposite through a self-assembly method
  15. Failure assessment of a woven E-glass/vinyl ester composite subjected to large deformation loading
  16. Nanocomposite synthesis by thermolysis of [Ag(hfac)(COD)] in amorphous polystyrene
  17. Quantitative evaluation of mineral admixtures on the properties, pore structure, and durability of cement-based composites
Downloaded on 7.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/secm-2011-0121/html
Scroll to top button