Article
Open Access
The effect of multi-directional stiffness degradation on the non-linear analysis of composite laminates
-
Sung-Cheon Han
Published/Copyright:
June 1, 2012
Published Online: 2012-06-01
Published in Print: 2012-06-01
©2012 by Walter de Gruyter Berlin Boston
Articles in the same Issue
- Masthead
- Masthead
- Original Articles
- Characterization of sputtered Al-B-Si thin films produced with composite targets for device applications
- Aluminum reinforcement by gas tungsten arc welding
- Formation and characterization of silica-coated HAP particles
- Mechanical properties and mechanical behavior of (SiO2)f/SiO2 composites with 3D six-directional braided quartz fiber preform
- Buckling behaviour of cross-ply laminated plates by a higher-order shear deformation theory
- The effect of multi-directional stiffness degradation on the non-linear analysis of composite laminates
- Effect of shallow straight-joint braided fabric geometrical parameters on fiber volume fraction
- Forced vibration of delaminated Timoshenko beams subjected to a moving load
- Axial behaviour of HSS tubular sections strengthened by CFRP strips: an experimental investigation
- Determination of displacement and failure loads formed in reinforced concrete construction with overhang and without overhang by ANN modeling
- Fabrication and characterization of hydroxyapatite/collagen bone-like nanocomposite through a self-assembly method
- Failure assessment of a woven E-glass/vinyl ester composite subjected to large deformation loading
- Nanocomposite synthesis by thermolysis of [Ag(hfac)(COD)] in amorphous polystyrene
- Quantitative evaluation of mineral admixtures on the properties, pore structure, and durability of cement-based composites
Keywords for this article
assumed natural strain;
element-based Lagrangian shell element;
modified first-order shear deformation theory;
non-linear analysis;
stiffness degradation
Creative Commons
BY-NC-ND 3.0
Articles in the same Issue
- Masthead
- Masthead
- Original Articles
- Characterization of sputtered Al-B-Si thin films produced with composite targets for device applications
- Aluminum reinforcement by gas tungsten arc welding
- Formation and characterization of silica-coated HAP particles
- Mechanical properties and mechanical behavior of (SiO2)f/SiO2 composites with 3D six-directional braided quartz fiber preform
- Buckling behaviour of cross-ply laminated plates by a higher-order shear deformation theory
- The effect of multi-directional stiffness degradation on the non-linear analysis of composite laminates
- Effect of shallow straight-joint braided fabric geometrical parameters on fiber volume fraction
- Forced vibration of delaminated Timoshenko beams subjected to a moving load
- Axial behaviour of HSS tubular sections strengthened by CFRP strips: an experimental investigation
- Determination of displacement and failure loads formed in reinforced concrete construction with overhang and without overhang by ANN modeling
- Fabrication and characterization of hydroxyapatite/collagen bone-like nanocomposite through a self-assembly method
- Failure assessment of a woven E-glass/vinyl ester composite subjected to large deformation loading
- Nanocomposite synthesis by thermolysis of [Ag(hfac)(COD)] in amorphous polystyrene
- Quantitative evaluation of mineral admixtures on the properties, pore structure, and durability of cement-based composites
