Determination of displacement and failure loads formed in reinforced concrete construction with overhang and without overhang by ANN modeling

Articles in the same Issue

1. Masthead
2. Masthead
3. Original Articles
4. Characterization of sputtered Al-B-Si thin films produced with composite targets for device applications
5. Aluminum reinforcement by gas tungsten arc welding
6. Formation and characterization of silica-coated HAP particles
7. Mechanical properties and mechanical behavior of (SiO₂)_f/SiO₂ composites with 3D six-directional braided quartz fiber preform
8. Buckling behaviour of cross-ply laminated plates by a higher-order shear deformation theory
9. The effect of multi-directional stiffness degradation on the non-linear analysis of composite laminates
10. Effect of shallow straight-joint braided fabric geometrical parameters on fiber volume fraction
11. Forced vibration of delaminated Timoshenko beams subjected to a moving load
12. Axial behaviour of HSS tubular sections strengthened by CFRP strips: an experimental investigation
13. Determination of displacement and failure loads formed in reinforced concrete construction with overhang and without overhang by ANN modeling
14. Fabrication and characterization of hydroxyapatite/collagen bone-like nanocomposite through a self-assembly method
15. Failure assessment of a woven E-glass/vinyl ester composite subjected to large deformation loading
16. Nanocomposite synthesis by thermolysis of [Ag(hfac)(COD)] in amorphous polystyrene
17. Quantitative evaluation of mineral admixtures on the properties, pore structure, and durability of cement-based composites