Synergistic effect of vermiculite clay and ionizing irradiation on the physical and mechanical properties of polybutadiene rubber/ethylene propylene diene monomer nanocomposite
Abstract
Blends of rubber-rubber have desired properties intermediated between two rubber matrices. On the other hand, polymer-clay nanocomposites have attracted the attention of many researchers and experimental results are presented in a large number of recent papers and patents because of the outstanding mechanical properties and low gas permeability that are achieved in many cases. Polymer-clay nanocomposites are a new class of mineral-field polymer that contain relatively small amounts (<10%) of nanometer-sized clay particles. In this study, new nanocomposite materials were produced from the blend of polybutadiene rubber (BR) and ethylene propylene diene monomer rubber (EPDM), BR/EPDM (50/50) as matrix and organically modified vermiculite clay (VMT) by quaternary alkylammonium in different contents (3, 6, 9 and 12 phr) as the filler by using rubber mill then, the rubber nanocomposite sheets were irradiated at doses of 25, 50, 75, 100 and 150 kGy using γ-radiation technique as a crosslinking tool. The prepared composites can be characterized by using various analytical techniques including X-ray diffractometer (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) as well as mechanical properties measurements.
References
1. Wang, L., Wang, X., Chen, Z., Ma, P.: Effect of doubly organo-modified vermiculite on the properties of vermiculite/polystyrene nanocomposites. Appl. Clay Sci. 75, 74 (2013).10.1016/j.clay.2013.03.005Suche in Google Scholar
2. Marzocca, A. J., Rodriguez Garraza, A. L., Sorichetti, P., Mosca, H. O.: Cure kinetics and swelling behaviour in polybutadiene rubber. Polym. Test. 29, 477 (2010).10.1016/j.polymertesting.2010.02.008Suche in Google Scholar
3. Duin, M. V., Orza, R., Peters, R., Chechik, V.: Mechanism of peroxide cross-linking of EPDM rubber. Macromol. Symp. 291, 66 (2010).10.1002/masy.201050508Suche in Google Scholar
4. Abou Zeid, M. M.: Radiation effect on properties of carbon black filled NBR/EPDM rubber blends. Eur. Polym. J. 43, 4415 (2007).10.1016/j.eurpolymj.2007.07.013Suche in Google Scholar
5. Ebewele, R. O.: Polymer Science and Technology. Chapman and Hall/CRC Press LLC, Boca Raton, FL, USA, (2000). Chapter 5, p. 143.10.1201/9781420057805Suche in Google Scholar
6. Li, R. K. Y., Xu, Y., Li, L., Meng, Y. Z.: Preparation of poly (propylene carbonate)/organo-vermiculite nanocomposites via direct melt intercalation. Eur. Polym. J. 41, 881 (2005).10.1016/j.eurpolymj.2004.10.033Suche in Google Scholar
7. Tang, Z., Lu, D., Guo, J., Su, Z.: Thermal stabilities of vermiculites/polystyrene (VMTs/PS) naonocomposites via insitu bulk polymerization. Mater. Lett. 62, 4223 (2008).10.1016/j.matlet.2008.06.044Suche in Google Scholar
8. Fernández, M. J., Fernández, M. D., Aranburu, I.: Poly(L-lactic acid)/organically modified vermiculite nanocomposites prepared by melt compounding: Effect of clay modification on microstructure and thermal properties. Eur. Polym. J. 49, 1257 (2013).10.1016/j.eurpolymj.2013.02.031Suche in Google Scholar
9. Ahmadi, S. J., Huang, Y.-D., Ren, N., Mohaddespour, A., Ahmadi-Brooghani, S. Y.: The comparison of EPDM/clay nanocomposites and conventional composites in exposure of gamma irradiation. Compos. Sci. Technol. 69, 997 (2009).10.1016/j.compscitech.2009.01.006Suche in Google Scholar
10. El-Nemr, K. F., Khaffaga, M. M., Saleh, S. N., Zahran, M. K.: Physico-chemical and spectroscopic properties of gamma irradiated ethylene propylene diene monomer rubber/vermiculite clay/maleic anhydride nanocomposites. Polym. Compos. 39, 2469 (2018).10.1002/pc.24233Suche in Google Scholar
11. El-Nemr, K. F., Ali, M. A. M., Hassan, M. M., Hamed, H. E.: Features of the structure and properties of radiation vulcanizates based on blends of polybutadiene and ethylene-propylene diene rubber. J. Vinyl Addit. Technol. DOI 10.1002/vnl.21645 (2018).10.1002/vnl.21645Suche in Google Scholar
12. Gu, Z., Song, G., Liu, W.: Preparation and properties of cis-1,4-polybutadiene rubber/OMMT/AT nanocomposites. Adv. Mater. Res. 586, 80 (2012).10.4028/www.scientific.net/AMR.586.80Suche in Google Scholar
13. Xu, J., Meng, Y. Z., Li, R. K. Y., Xu, Y., Rajulu, A. V.: Preparation and properties of poly(vinyl alcohol)–vermiculite nanocomposites. J. Polym. Sci. B Polym. Phys. 4, 749 (2003).10.1002/polb.10404Suche in Google Scholar
14. Zhang, K., Xu, J., Wang, K. Y., Cheng, L., Wang, J., Liu, B.: Preparation and characterization of chitosan nanocomposites with vermiculite of different modification. Polym. Degrad. Stab. 94, 2121 (2009).10.1016/j.polymdegradstab.2009.10.002Suche in Google Scholar
15. Mon, S. G., Ruban, Y. V., Roy, D. V.: Synthesis of kaolinite-filled EPDM rubber composites by solution intercalation: structural characterization and studies on mechanical properties. Appl. Nanosci. 1, 131 (2011).10.1007/s13204-011-0018-zSuche in Google Scholar
16. Zhang, Y., Liu, W., Han, W., Guo, W., Wu, C.: Preparation and properties of novel natural rubber/organo-vermiculite nanocomposites. Polym. Compos. 42, 30 (2009).10.1002/pc.20526Suche in Google Scholar
17. Ali, M. A., El-Nemr, K. F., Hassan, M. M.: Waste newsprint fibers for reinforcement of radiation-cured styrene butadiene rubber-based composites – part I: mechanical and physical properties. J. Reinf. Plast. Compos. 30, 721 (2011).10.1177/0731684411407949Suche in Google Scholar
18. Marković, G., Jovanović, V., Samaržija-Jovanović, S., Marinović-Cincović, M., Budinski-Simendić, J.: Thermal stability of γ-irradiated chlorinated isobutylene–isoprene copolymer/chlorosulphonated polyethylene rubber blend/carbon black nanocomposites. J. Thermoplast. Compos. Mater. 26, 1071 (2012).10.1177/0892705711433438Suche in Google Scholar
19. Tang, Z., Lu, D., Guo, J., Su, Z.: Thermal stabilities of vermiculites/polystyrene (VMTs/PS) naonocomposites via in-situ bulk polymerization. Mater. Lett. 62, 4223 (2008).10.1016/j.matlet.2008.06.044Suche in Google Scholar
20. Khalil, A. M., El-Nemr, K. F., Khalaf, A. M.: Effect of short polyethylene terephthalate fibers on properties of ethylene- propylene diene rubber composites. J. Polym. Res. 19, 9883 (2012).10.1007/s10965-012-9883-8Suche in Google Scholar
©2019 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Uranium oxide synthetic pathway discernment through thermal decomposition and morphological analysis
- Applications of the uranium’s set of isotopes for nuclear dating: the Monte-Carlo method
- Quantification of trace level rare earth elements in Al matrices by ICP-MS
- Synergistic effect of vermiculite clay and ionizing irradiation on the physical and mechanical properties of polybutadiene rubber/ethylene propylene diene monomer nanocomposite
- Development of a novel 68Ga-dextran carboxylate derivative for blood pool imaging
- Distribution of naturally occurring radionuclides in soil around a coal-based power plant and their potential radiological risk assessment
- Investigation of γ ray shielding, structural and dissolution rate studies of alkali based bismuth borate glass systems with MoO3 added
- Novel radiochromic porphyrin-based film dosimeters for γ ray dosimetry: investigation on metal and ligand effects
Artikel in diesem Heft
- Frontmatter
- Uranium oxide synthetic pathway discernment through thermal decomposition and morphological analysis
- Applications of the uranium’s set of isotopes for nuclear dating: the Monte-Carlo method
- Quantification of trace level rare earth elements in Al matrices by ICP-MS
- Synergistic effect of vermiculite clay and ionizing irradiation on the physical and mechanical properties of polybutadiene rubber/ethylene propylene diene monomer nanocomposite
- Development of a novel 68Ga-dextran carboxylate derivative for blood pool imaging
- Distribution of naturally occurring radionuclides in soil around a coal-based power plant and their potential radiological risk assessment
- Investigation of γ ray shielding, structural and dissolution rate studies of alkali based bismuth borate glass systems with MoO3 added
- Novel radiochromic porphyrin-based film dosimeters for γ ray dosimetry: investigation on metal and ligand effects