Effects of Eucommia ulmoides gum content and processing conditions on damping properties of E. ulmoides gum/nitrile-butadiene rubber nanocomposites
-
Longyu Xu
Abstract
In order to improve the effective damping of nitrile-butadiene rubber (NBR) in a wider temperature range, Eucommia ulmoides gum (EUG) was incorporated into NBR to prepare nanocomposites. Atomic force microscopy (AFM) showed that EUG was dispersed in NBR matrix in the form of nanocrystals. Compared with pure NBR, the mechanical properties of NBR/EUG (80/20) composites are significantly improved. Dynamic thermo-mechanical analysis (DMA) showed that there are two dynamic mechanical loss peaks in two composites. With the increase of EUG component, the peak value of loss factor (tanδ) decreases gradually at −10 °C, and the temperature corresponding to the peak value tends to move towards high temperature, while the peak area increases gradually at −50 °C. Parking and repeated mixing make both loss peaks move towards high temperature. The differential scanning calorimetry analyzer (DSC) results expressed that the melting temperature and peak area of EUG after vulcanization decreased significantly compared with that before vulcanization. Hence, the damping effect of NBR can be improved and its damping temperature range can be widened by adding EUG and changing processing conditions.
-
Author contribution: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.
-
Research funding: This work was supported by the project of Natural Science Foundation of China (nos. 51803102, 51903129), Natural Science Foundation of Shandong Province (nos. 201807070028, 201808220020, 2020ME081) and the Source Innovation Project of Qingdao (19-6-2-75-cg).
-
Conflict of interest statement: The authors declare no conflicts of interest regarding this article.
References
1. Zhang, J. C., Xue, Z. H., Yan, R. F. Damping performance of Eucommia ulmoides gum. Chin. J. Polym. Sci. 2011, 29, 157–163. https://doi.org/10.1007/s10118-010-1008-4.Search in Google Scholar
2. Zhang, J. C., Zhang, L. Q. Dynamic mechanical properties of Eucommia ulmoides gum with different degree of cross-linking. Polym. Bull. 2012, 68, 2021–2032. https://doi.org/10.1007/s00289-012-0712-3.Search in Google Scholar
3. Li, M., He, Z., Zheng, H. M., Zhang, N. Dependence of damping characteristics of a beam with damping rubber magnetic powder on rubber property. Acta Mech. Solida Sin. 2008, 21, 247–256. https://doi.org/10.1007/s10338-008-0828-z.Search in Google Scholar
4. Kurzina, E. G., Kolmakov, A. G., Bespal’ko, S. V., Kudryavtseva, V. D., Kurzina, N. M. Influence of structure on the dynamic properties of polymer damping composite materials. Russ. Metall. 2021, 2021, 1294–1298. https://doi.org/10.1134/s0036029521100189.Search in Google Scholar
5. Li, Z. G., Li, C. Study on vulcanizing and asphalt modifying of Eucommia ulmoides gum. In Proceedings of the International Conference on Advanced Engineering Materials and Architecture Science, Xian, Peoples R China, F Jan 04–05, 2014.10.4028/www.scientific.net/AMM.488-489.765Search in Google Scholar
6. Chandran, V., Nagarajan, L., Thomas, M. R. Evaluation of vibration damping behavior of different sizes of waste tyre rubber in natural rubber composites. J. Compos. Mater. 2018, 52, 2493–2501. https://doi.org/10.1177/0021998317748467.Search in Google Scholar
7. Liu, G. S., Zhang, X., Zhang, T. X., Zhang, J. C., Zhang, P. D., Wang, W. C. Determination of the content of Eucommia ulmoides gum by variable temperature Fourier transform infrared spectrum. Polym. Test. 2017, 63, 582–586. https://doi.org/10.1016/j.polymertesting.2017.09.023.Search in Google Scholar
8. Qi, X., Zhang, J. H., Zhang, L. Q., Yue, D. M. Bio-based self-healing Eucommia ulmoides ester elastomer with damping and oil resistance. J. Mater. Sci. 2020, 55, 4940–4951. https://doi.org/10.1007/s10853-019-04272-3.Search in Google Scholar
9. Zhang, J. C., Xue, Z. H., Yan, R. F., Fang, S. B. Natural polymer material-recent studies on Eucommia ulmoides gum. Acta Polym. Sin. 2011, 10, 1105–1117.Search in Google Scholar
10. Zhang, J. C., Zhang, T. X., Dong, M. J., Liu, G. S., Dong, Y. Y. Study on degrees of mesomorphic zone of polymer. I. Determination of degrees of crystallinity of Eucommia ulmoides gum and natural rubber by dynamic mechanical thermal analysis. Polym. Test. 2017, 63, 511–520. https://doi.org/10.1016/j.polymertesting.2017.09.018.Search in Google Scholar
11. Yang, F., Liu, Q., Li, X. Y., Yao, L., Fang, Q. H. Epoxidation of eucommia ulmoides gum by emulsion process and the performance of its vulcanizates. Polym. Bull. 2017, 74, 3657–3672. https://doi.org/10.1007/s00289-017-1912-7.Search in Google Scholar
12. Qi, X., Xie, F., Zhang, J. C., Zhang, L. Q., Yue, D. M. Bio-based cyclized Eucommia ulmoides gum elastomer for promising damping applications. RSC Adv. 2019, 9, 42367–42374. https://doi.org/10.1039/c9ra07856h.Search in Google Scholar PubMed PubMed Central
13. Zhang, J., Xue, Z. A comparative study on the properties of Eucommia ulmoides gum and synthetic trans-1,4-polyisoprene. Polym. Test. 2011, 30, 753–759. https://doi.org/10.1016/j.polymertesting.2011.06.010.Search in Google Scholar
14. Kang, H. L., Xu, M. Z., Wang, H. Y., Li, L., Li, J. X., Fang, Q. H., Zhang, J. C. Heat-responsive shape memory Eucommia ulmoides gum composites reinforced by zinc dimethacrylate. J. Appl. Polym. Sci. 2020, 137, 8. https://doi.org/10.1002/app.49133.Search in Google Scholar
15. Zhao, X. Y., Shou, T., Liang, R. R., Hu, S. K., Yu, P., Zhang, L. Q. Bio-based thermoplastic polyurethane derived from polylactic acid with high-damping performance. Ind. Crop. Prod. 2020, 154, 8. https://doi.org/10.1016/j.indcrop.2020.112619.Search in Google Scholar
16. Yang, F., Dai, L., Liu, T., Zhou, J. L., Fang, Q. H. Preparation of high-damping soft elastomer based on Eucommia ulmoides gum. Polym. Bull. 2020, 77, 33–47. https://doi.org/10.1007/s00289-019-02723-0.Search in Google Scholar
17. Cao, R. W., Deng, L. H., Feng, Z. B., Zhao, X. Y., Li, X. L., Zhang, L. Q. Preparation of natural bio-based Eucommia ulmoides gum/styrene-butadiene rubber composites and the evaluation of their damping and sound absorption properties. Polymer 2021, 213, 9. https://doi.org/10.1016/j.polymer.2020.123292.Search in Google Scholar
18. Zhang, J. C., Xue, Z. H. Study on under-water sound absorption properties of Eucommia ulmoides gum and its blends. Polym. Bull. 2011, 67, 511–525. https://doi.org/10.1007/s00289-011-0489-9.Search in Google Scholar
19. Xia, L., Wang, Y., Ma, Z. G., Du, A. H., Qiu, G. X., Xin, Z. X. Preparation of epoxidized Eucommia ulmoides gum and its application in styrene-butadiene rubber (SBR)/silica composites. Polym. Adv. Technol. 2017, 28, 94–101. https://doi.org/10.1002/pat.3863.Search in Google Scholar
20. Sun, Q. Q., Zhao, X. K., Wang, D. M., Dong, J. N., She, D., Peng, P. Preparation and characterization of nanocrystalline cellulose/Eucommia ulmoides gum nanocomposite film. Carbohydr. Polym. 2018, 181, 825–832. https://doi.org/10.1016/j.carbpol.2017.11.070.Search in Google Scholar PubMed
21. Zhao, J., Zhang, H. C., Ma, C. H., Han, H. J., Sun, R. Y., Xie, M. R. Binary modification of Eucommia ulmoides gum toward elastomer with tunable mechanical properties and good compatibility. J. Polym. Sci., Polym. Chem. Ed. 2019, 57. https://doi.org/10.1002/pola.29381.Search in Google Scholar
22. Wang, J. J., Geng, X. Y., Wang, W. C., Zhang, L. Q., Zhao, X. Y., Nishi, T. Nitrile rubber/sliding graft copolymer damping material with significantly improved strength and damping performance. J. Appl. Polym. Sci. 2019, 136, 7. https://doi.org/10.1002/app.47188.Search in Google Scholar
23. Zhao, X. Y., Xiang, P., Tian, M., Fong, H., Jin, R. G., Zhang, L. Q. Nitrile butadiene rubber/hindered phenol nanocomposites with improved strength and high damping performance. Polymer 2007, 48, 6056–6063. https://doi.org/10.1016/j.polymer.2007.08.011.Search in Google Scholar
24. Zhao, X. Y., Niu, K. J., Xu, Y., Peng, Z., Jia, L., Hui, D., Zhang, L. Q. Morphology and performance of NR/NBR/ENR ternary rubber composites. Compos. Part. B-Eng. 2016, 107, 106–112. https://doi.org/10.1016/j.compositesb.2016.09.073.Search in Google Scholar
© 2022 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Material Properties
- Advancement in hemp fibre polymer composites: a comprehensive review
- Effects and mechanism of filler content on thermal conductivity of composites: a case study on plasticized polyvinyl chloride/graphite composites
- Effects of Eucommia ulmoides gum content and processing conditions on damping properties of E. ulmoides gum/nitrile-butadiene rubber nanocomposites
- Preparation and Assembly
- Preparation of flame retardant glass fiber via emulsion impregnation and application in polyamide 6
- Invertase adsorption with polymers functionalized by aspartic acid
- Engineering and Processing
- External field alignment of nickel-coated carbon fiber/PDMS composite for biological monitoring with high sensitivity
- Development of a cavity pressure control for injection moulding by adjusting the cross-section in the hot runner
- Process optimization for extraction of avian eggshell membrane derived collagen for tissue engineering applications
- Joint formation mechanism of different laser transmission welding paths
Articles in the same Issue
- Frontmatter
- Material Properties
- Advancement in hemp fibre polymer composites: a comprehensive review
- Effects and mechanism of filler content on thermal conductivity of composites: a case study on plasticized polyvinyl chloride/graphite composites
- Effects of Eucommia ulmoides gum content and processing conditions on damping properties of E. ulmoides gum/nitrile-butadiene rubber nanocomposites
- Preparation and Assembly
- Preparation of flame retardant glass fiber via emulsion impregnation and application in polyamide 6
- Invertase adsorption with polymers functionalized by aspartic acid
- Engineering and Processing
- External field alignment of nickel-coated carbon fiber/PDMS composite for biological monitoring with high sensitivity
- Development of a cavity pressure control for injection moulding by adjusting the cross-section in the hot runner
- Process optimization for extraction of avian eggshell membrane derived collagen for tissue engineering applications
- Joint formation mechanism of different laser transmission welding paths