Abstract
Three new mixed-type surfmers were synthesized using poly(propylene oxide)/poly(ethylene oxide)/poly(propylene oxide) (PPO-PEO-PPO) having terminal tertiary amine group as the basic material: (1) PPO-PEO-PPO with a carboxyl group on one end (MTA); (2) PPO-PEO-PPO with a quaternary ammonium group on one end (JTA); (3) PPO-PEO-PPO with a quaternary ammonium group on one end and a carboxyl group on the other end (MJTA). These products were confirmed by 1H-NMR and FT-IR. Similar to PPO-PEO-PPO, the three surfmers have a cloud point (Tcp). Both MJTA and MTA have lower Tcp than JTA. However, the cloud points of both MJTA-Na+ and MTA-Na+ are much higher than JTA. Their different Tcp may be caused by their strength of dissociation in water. In addition, at a high temperature (T>Tcp of MJTA), MJTA-Na+ can be considered a pH-sensitive surfactant. At neutral and alkaline conditions, it can be used as an emulsifier. However, at acidic conditions, it loses its emulsification property. MTA-Na+ has the same property.
Acknowledgments
This work was financially supported by the Specialized Research Fund for the Doctoral Program of Higher Education (No. 20135121120007) and National Science Fund for Distinguished Young Scholars of China (No. 51125019).
References
[1] Guyot A, Tauer K. Adv. Polym. Sci. 1994, 111, 43–65.Suche in Google Scholar
[2] Schoonbrood HAS, Unzue MJ, Beck OJ, Asua JM. Macromolecules 1997, 30, 6024–6033.10.1021/ma9701447Suche in Google Scholar
[3] Reb P, Margarit-Puri K, Klapper M, Mullen K. Macromolecules 2000, 33, 7718–7723.10.1021/ma000139uSuche in Google Scholar
[4] Fredric MM, Jason SK. Angew. Chem. Int. Ed. 2000, 39, 1906–1920.Suche in Google Scholar
[5] Fuhrhop JH, Bach R. Adv. Supramol. Chem. 1992, 2, 25–63.Suche in Google Scholar
[6] Herold M, Brunner H, Tovar GEM. Macromol. Chem. Phys. 2003, 204, 770–778.Suche in Google Scholar
[7] Summers M, Eastoe J. Adv. Colloid Interface Sci. 2003, 100–102, 137–152.Suche in Google Scholar
[8] Hong CK, Hwang MJ, Ryu DW, Moon H. Colloids Surf. A 2008, 331, 250–256.10.1016/j.colsurfa.2008.08.014Suche in Google Scholar
[9] Sawaryn C, Landfester K, Taden A. Macromolecules 2010, 43, 8933–8941.10.1021/ma101169gSuche in Google Scholar
[10] Lijima M, Kobayakawa M, Yamazaki M, Ohta Y, Kamiya H. J. Am. Chem. Soc. 2009, 131, 16342–16343.Suche in Google Scholar
[11] Hill A, Candau F, Selb J. Macromolecules 1993, 26, 4521–4532.10.1021/ma00069a017Suche in Google Scholar
[12] Shedge AS, Lele AK, Wadgaonkar PP, Hourdet D, Pcrrin P, Chassenieux C, Badiger MV. Macromol. Chem. Phys. 2005, 206, 464–472.Suche in Google Scholar
[13] Wever DAZ, Picchioni F, Broekhuis AA. Prog. Polym. Sci. 2011, 36, 1558–1628.Suche in Google Scholar
[14] Zhang W, Du ZP, Chang CH, Wang GY. J. Colloid Interface Sci. 2009, 337, 563–568.Suche in Google Scholar
[15] Wu JY, Xu YM, Dabros T, Hamza H. Colloids Surf. A 2004, 232, 229–237.10.1016/j.colsurfa.2003.10.028Suche in Google Scholar
[16] Chern CS. Principles and Applications of Emulsion Polymerization, John Wiley & Sons: Hoboken, NJ, 2008.10.1002/9780470377949Suche in Google Scholar
[17] Herk AV. Chemistry and Technology of Emulsion Polymerization, Herk, AV, Ed., Blackwell: Oxford, 2005, pp. 25–44.Suche in Google Scholar
[18] Ma JG, Boyd BJ, Drummond CJ. Langmuir 2006, 22, 8646–8654.10.1021/la0602822Suche in Google Scholar PubMed
[19] Zhou LZ, Jiang XH, Li YT, Chen Z, Hu XQ. Langmuir 2007, 23, 11404–11408.10.1021/la701154wSuche in Google Scholar PubMed
©2014 by De Gruyter
Artikel in diesem Heft
- Frontmatter
- Editorial
- Editorial improvements at the Journal of Polymer Engineering
- Original articles
- Cationic copolymerization of 1,3-pentadiene with α-pinene
- In vitro degradation of polyglycolic acid synthesized by a one-step reaction
- Synthesis of a novel class of mixed-type surfmers and their properties in water
- Unique viscosity mutation of multi-generation hyperbranched waterborne polyurethane
- Preparation and characterization of oxidized starch-graft-poly(styrene-butyl acrylate) latex via emulsion polymerization
- Peroxide vulcanization of natural rubber. Part I: effect of temperature and peroxide concentration
- The stimuli-response characters of hydrogels prepared using ultrasound
- A new conductometric biosensor based on horseradish peroxidase immobilized on chitosan and chitosan/gold nanoparticle films
- A new approach for the development of textile waste cotton reinforced composites (T-FRP): laminated hybridization vs. coupling agents
- Effects of the surface treatment of wollastonite on the tensile and flow properties for reinforced polypropylene composites
- Effect of the quenching temperature on the mechanical and thermophysical properties of polycarbonate pigmented with titanium dioxide
- Processing and characterization of poly(lactic acid) blended with polycarbonate and chain extender
- Characteristics analysis and mold design for ultrasonic-assisted injection molding
Artikel in diesem Heft
- Frontmatter
- Editorial
- Editorial improvements at the Journal of Polymer Engineering
- Original articles
- Cationic copolymerization of 1,3-pentadiene with α-pinene
- In vitro degradation of polyglycolic acid synthesized by a one-step reaction
- Synthesis of a novel class of mixed-type surfmers and their properties in water
- Unique viscosity mutation of multi-generation hyperbranched waterborne polyurethane
- Preparation and characterization of oxidized starch-graft-poly(styrene-butyl acrylate) latex via emulsion polymerization
- Peroxide vulcanization of natural rubber. Part I: effect of temperature and peroxide concentration
- The stimuli-response characters of hydrogels prepared using ultrasound
- A new conductometric biosensor based on horseradish peroxidase immobilized on chitosan and chitosan/gold nanoparticle films
- A new approach for the development of textile waste cotton reinforced composites (T-FRP): laminated hybridization vs. coupling agents
- Effects of the surface treatment of wollastonite on the tensile and flow properties for reinforced polypropylene composites
- Effect of the quenching temperature on the mechanical and thermophysical properties of polycarbonate pigmented with titanium dioxide
- Processing and characterization of poly(lactic acid) blended with polycarbonate and chain extender
- Characteristics analysis and mold design for ultrasonic-assisted injection molding