Home Preparation and characterization of oxidized starch-graft-poly(styrene-butyl acrylate) latex via emulsion polymerization
Article
Licensed
Unlicensed Requires Authentication

Preparation and characterization of oxidized starch-graft-poly(styrene-butyl acrylate) latex via emulsion polymerization

  • Shijie Cheng EMAIL logo , Jun Xu and Yumin Wu
Published/Copyright: May 20, 2014
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Journal of Polymer Engineering
From the journal Journal of Polymer Engineering Volume 34 Issue 7

Abstract

Oxidized starch-graft-poly(styrene-butyl acrylate) [OS-g-P(St-BA)] latex was synthesized by the graft copolymerization of OS with St and n-butyl acrylate (BA) via emulsion polymerization. The graft copolymers were characterized by Fourier transform infrared (FT-IR), transmission electronic microscopy (TEM), dynamic light scattering, thermogravimetry (TG), and differential scanning calorimetry (DSC). The effects of the amount of OS, monomers, and initiator on graft copolymerization were investigated. Under the optimal conditions, the percentage of graft (PG), grafting efficiency (GE), and ζ potential could reach 256.5%, 41.7%, and -30.1 mV, respectively. The results indicated that the OS grafted onto particles greatly enhanced the colloidal stability of latex. The thermal stability properties of OS-g-P(St-BA) were also improved by the addition of OS. The OS-g-P(St-BA) latex may be used to partly replace the conventional synthetic latex for paper coating.

Keywords: colloidal stability; graft; latex; oxidized starch; thermal stability
Corresponding author: Shijie Cheng, College of Polymer Science and Engineering, Qingdao University of Science and Technology, Qingdao, 266042, China, e-mail:

Acknowledgments

This study was financially supported by the National Natural Science Foundation of China (No. 20876081) and the Science Foundation of Shandong Province (No. ZR2012BM015).

References

[1] Lanthong P, Nuisin R, Kiatkamjornwong S. Carbohydr. Polym. 2006, 66, 229–245.Search in Google Scholar

[2] Sorokin AB, Kachkarova-Sorokina SL, Donze C, Pinel C, Gallezot P. Top. Catal. 2004, 27, 67–76.Search in Google Scholar

[3] Maurer HW, Kearney RL. Starch-Stärke 1998, 50, 396–402.10.1002/(SICI)1521-379X(199809)50:9<396::AID-STAR396>3.0.CO;2-8Search in Google Scholar

[4] Koch H, R per H. Starch-Stärke 1988, 40, 121–131.10.1002/star.19880400402Search in Google Scholar

[5] Parovuori P, Hamunen A, Forssell P, Autio K, Poutanen K. Starch-Stärke 1995, 47, 19–23.10.1002/star.19950470106Search in Google Scholar

[6] Du Y, Zang Y-H, Du J. Ind. Eng. Chem. Res. 2011, 50, 9781–9786.Search in Google Scholar

[7] De Bruyn H, Sprong E, Gaborieau M, Roper III JA, Gilbert RG. J. Polym. Sci. Pol. Chem. 2007, 45, 4185–4192.Search in Google Scholar

[8] Bertholon I, Lesieur S, Labarre D, Besnard M, Vauthier C. Macromolecules 2006, 39, 3559–3567.10.1021/ma060338zSearch in Google Scholar

[9] Xu J, Long L, Hu H. J. Polym. Eng. 2013, 33, 323–330.Search in Google Scholar

[10] De Bruyn H, Sprong E, Gaborieau M, David G, Roper Iii JA, Gilbert RG. J. Polym. Sci. Pol. Chem. 2006, 44, 5832–5845.Search in Google Scholar

[11] Abell S. Pulp Paper 1995, 69, 99–105.10.1016/0306-4522(95)00240-JSearch in Google Scholar

[12] Carr ME. Starch-Stärke 1992, 44, 219–223.10.1002/star.19920440605Search in Google Scholar

[13] Zhang X, Li WL. J. Appl. Polym. Sci. 2003, 88, 1563–1566.Search in Google Scholar

[14] Nie Y, Tian X, Liu Y, Wu K, Wang J. Polym. Compos. 2013, 34, 77–87.Search in Google Scholar

[15] Mou J, Li X, Wang H, Fei G, Liu Q. Starch-Stärke 2012, 64, 826–834.10.1002/star.201200041Search in Google Scholar

[16] Qu B, Li H, Niu Y. J. Polym. Eng. 2013, 33, 521–526.Search in Google Scholar

[17] Zhang YR, Wang XL, Zhao GM, Wang YZ. Carbohydr. Polym. 2011, 87, 2554–2562.Search in Google Scholar

[18] Song H, Zhang SF, Ma XC, Wang DZ, Yang JZ. Carbohydr. Polym. 2007, 69, 189–195.Search in Google Scholar

[19] Gaborieau M, De bruyn H, Mange S, Castignolles P, Brockmeyer A, Gilbert RG. J. Polym. Sci. Pol. Chem. 2009, 47, 1836–1852.Search in Google Scholar

[20] Yang SC, Ge HX, Hu Y, Jiang XQ, Yang CZ. Colloid Polym. Sci. 2000, 278, 285–292.Search in Google Scholar

[21] Athawale VD, Lele V. Starch-Stärke 2000, 52, 205–213.10.1002/1521-379X(200007)52:6/7<205::AID-STAR205>3.0.CO;2-3Search in Google Scholar

Received: 2014-2-25
Accepted: 2014-4-24
Published Online: 2014-5-20
Published in Print: 2014-9-1

©2014 by De Gruyter

Articles in the same Issue

  1. Frontmatter
  2. Editorial
  3. Editorial improvements at the Journal of Polymer Engineering
  4. Original articles
  5. Cationic copolymerization of 1,3-pentadiene with α-pinene
  6. In vitro degradation of polyglycolic acid synthesized by a one-step reaction
  7. Synthesis of a novel class of mixed-type surfmers and their properties in water
  8. Unique viscosity mutation of multi-generation hyperbranched waterborne polyurethane
  9. Preparation and characterization of oxidized starch-graft-poly(styrene-butyl acrylate) latex via emulsion polymerization
  10. Peroxide vulcanization of natural rubber. Part I: effect of temperature and peroxide concentration
  11. The stimuli-response characters of hydrogels prepared using ultrasound
  12. A new conductometric biosensor based on horseradish peroxidase immobilized on chitosan and chitosan/gold nanoparticle films
  13. A new approach for the development of textile waste cotton reinforced composites (T-FRP): laminated hybridization vs. coupling agents
  14. Effects of the surface treatment of wollastonite on the tensile and flow properties for reinforced polypropylene composites
  15. Effect of the quenching temperature on the mechanical and thermophysical properties of polycarbonate pigmented with titanium dioxide
  16. Processing and characterization of poly(lactic acid) blended with polycarbonate and chain extender
  17. Characteristics analysis and mold design for ultrasonic-assisted injection molding
https://doi.org/10.1515/polyeng-2014-0047
Keywords for this article
colloidal stability; graft; latex; oxidized starch; thermal stability

Articles in the same Issue

  1. Frontmatter
  2. Editorial
  3. Editorial improvements at the Journal of Polymer Engineering
  4. Original articles
  5. Cationic copolymerization of 1,3-pentadiene with α-pinene
  6. In vitro degradation of polyglycolic acid synthesized by a one-step reaction
  7. Synthesis of a novel class of mixed-type surfmers and their properties in water
  8. Unique viscosity mutation of multi-generation hyperbranched waterborne polyurethane
  9. Preparation and characterization of oxidized starch-graft-poly(styrene-butyl acrylate) latex via emulsion polymerization
  10. Peroxide vulcanization of natural rubber. Part I: effect of temperature and peroxide concentration
  11. The stimuli-response characters of hydrogels prepared using ultrasound
  12. A new conductometric biosensor based on horseradish peroxidase immobilized on chitosan and chitosan/gold nanoparticle films
  13. A new approach for the development of textile waste cotton reinforced composites (T-FRP): laminated hybridization vs. coupling agents
  14. Effects of the surface treatment of wollastonite on the tensile and flow properties for reinforced polypropylene composites
  15. Effect of the quenching temperature on the mechanical and thermophysical properties of polycarbonate pigmented with titanium dioxide
  16. Processing and characterization of poly(lactic acid) blended with polycarbonate and chain extender
  17. Characteristics analysis and mold design for ultrasonic-assisted injection molding
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 3.12.2025 from https://www.degruyterbrill.com/document/doi/10.1515/polyeng-2014-0047/html
Scroll to top button