Startseite Production of packaging paper from Populus deltoides NSSC pulp reinforced with rice straw cellulose nanofibrils
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Production of packaging paper from Populus deltoides NSSC pulp reinforced with rice straw cellulose nanofibrils

  • Saleh Ghahramani , Sahab Hedjazi EMAIL logo und Saeed Mahdavi
Veröffentlicht/Copyright: 6. August 2025
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Nordic Pulp & Paper Research Journal
Aus der Zeitschrift Nordic Pulp & Paper Research Journal Band 40 Heft 4

Abstract

As a key raw material in fluting paper production, NSSC pulp from hardwoods is crucial in sustainable packaging applications. Hence, efforts are underway to increase the quality of this pulp. This study aims to enhance the physical and mechanical properties of papers produced from Populus deltoides NSSC pulp by reinforcing them with cellulose nanofibrils (CNFs) derived from rice straw. The NSSC pulping of poplar wood was optimized, and then CNFs were added at 5, 10, and 15 % to refined NSSC pulp. Papers (127 g/m2) were fabricated, and the impact of CNF reinforcement on the physical and mechanical properties of papers was evaluated. Results demonstrated that the addition of CNFs significantly improved tensile, burst, and tear indices, bending stiffness, and ring crush test (RCT) by 32.46 %, 19.85 %, 18.22 %, 78.76 % and 65.71 %, respectively. Furthermore, the addition of CNF increased density (30.88 %) and simultaneously reduced thickness (20 %) and bulk (23.23 %). Cobb test showed that water absorption decreased by 35.48 %, indicating better water resistance, while drainage time increased by 87.30 %, reflecting changes in fiber network structure. CNFs facilitate extensive hydrogen bonding, yielding a denser and more robust fiber network. This study highlights CNFs’ potential as an additive for reinforcing NSSC papers and improving packaging performance.

Keywords: NSSC pulp; cellulose nanofibril (CNF); packaging paper; Populus deltoides ; rice straw
Corresponding author: Sahab Hedjazi, Department of Paper Sciences and Engineering, Faculty of Wood and Paper Engineering, Gorgan University of Agricultural Sciences and Natural Resources, 4918943464, Gorgan, Iran, E-mail:

  1. Research ethics: Not applicable.

  2. Informed consent: Not applicable.

  3. Author contributions: Saleh Ghahramani: Conceptualization, Methodology, Investigation, Writing –original, Formal analysis. Sahab Hedjazi: Conceptualization, Methodology, Validation, Writing – review& editing, Supervision, Project administration. Saeed Mahdavi: Validation, Methodology, Supervision.

  4. Use of Large Language Models, AI and Machine Learning Tools: None declared.

  5. Conflict of interest: The authors state no conflict of interest.

  6. Research funding: None declared.

  7. Data availability: All data supporting the findings of this study are included in the manuscript. Additional datasets are available from the corresponding author upon reasonable request.

References

Bajpai, P. (2018). Biermann’s handbook of pulp and paper: volume 2: paper and board making. Elsevier Inc., Netherlands.10.1016/B978-0-12-814238-7.00008-8Suche in Google Scholar

Balea, A., Merayo, N., Delgado Aguilar, M., Mutjé Pujol, P., Blanco, A., and Negro Álvarez, C. (2016a). Valorization of corn stalk by the production of cellulose nanofibers to improve recycled paper properties. BioRes 11: 3416–3431, https://doi.org/10.15376/biores.11.2.3416-3431.Suche in Google Scholar

Balea, A., Merayo, N., Seara, M., Fuente, E., Blanco, A., and Negro, C. (2016b). Effect of NFC from organosolv corn stalk pulp on retention and drainage during papermaking. Cellul. Chem. Technol. 50: 377–383.Suche in Google Scholar

Balea, A., Merayo, N., Fuente, E., Negro, C., Delgado-Aguilar, M., Mutje, P., and Blanco, A. (2018). Cellulose nanofibers from residues to improve linting and mechanical properties of recycled paper. Cellulose 25: 1339–1351, https://doi.org/10.1007/s10570-017-1618-x.Suche in Google Scholar

Boz, Z. (2024). Packaging. In: Smithers, G.W. (Ed.). Encyclopedia of food safety, 2nd ed. Academic Press, Oxford.10.1016/B978-0-12-822521-9.00251-3Suche in Google Scholar

Colodette, J.L. and Borges Gomes, F.J. (2014). A novel approach for maximizing eucalypt kraft pulp yield and bleachability. J-FOR 4: 38–44.Suche in Google Scholar

Dufresne, A. (2019). Nanocellulose processing properties and potential applications. Curr. For Rep. 5: 76–89, https://doi.org/10.1007/s40725-019-00088-1.Suche in Google Scholar

Ehman, N.V., Felissia, F.E., Tarrés, Q., Vallejos, M.E., Delgado-Aguilar, M., Mutjé, P., and Area, M.C. (2020). Effect of nanofiber addition on the physical–mechanical properties of chemimechanical pulp handsheets for packaging. Cellulose 27: 10811–10823, https://doi.org/10.1007/s10570-020-03207-5.Suche in Google Scholar

Gadhave, R.V., Gadhave, C.R., and Dhawale, P.V. (2022). Plastic-free bioactive paper coatings, way to next-generation sustainable paper packaging application: a review. Green Sustain. Chem 12: 9–27, https://doi.org/10.4236/gsc.2022.122002.Suche in Google Scholar

González Tovar, I., Boufi, S., Pèlach Serra, M.À., Alcalà Vilavella, M., Vilaseca Morera, F., and Mutjé Pujol, P. (2012). Nanofibrillated cellulose as paper additive in eucalyptus pulps. BioRes 7: 5167–5180, https://doi.org/10.15376/biores.7.4.5167-5180.Suche in Google Scholar

Guan, M., An, X., and Liu, H. (2019). Cellulose nanofiber (CNF) as a versatile filler for the preparation of bamboo pulp based tissue paper handsheets. Cellulose 26: 2613–2624, https://doi.org/10.1007/s10570-018-2212-6.Suche in Google Scholar

Hadilam, M.M., Afra, E., and Yousefi, H. (2013). Effect of cellulose nanofibers on the properties of bagasse paper. For Wood Prod. 66: 351–366, https://doi.org/10.22059/jfwp.2013.36119.Suche in Google Scholar

Idris, F.N.M., Ariffin, H., Tahir, P.M., and Ibrahim, R. (2024). Feasibility of lignin-containing cellulose nanofibrils derived from oil palm empty fruit bunch in enhancing the properties of non-wood handsheets. Ind. Crops Prod. 212: 118307, https://doi.org/10.1016/j.indcrop.2024.118307.Suche in Google Scholar

Jieying, S., Tingting, L., Caie, W., Dandan, Z., Gongjian, F., and Xiaojing, L. (2024). Paper-based material with hydrophobic and antimicrobial properties: advanced packaging materials for food applications. Compr. Rev. Food Sci. Food Saf. 23: e13373, https://doi.org/10.1111/1541-4337.13373.Suche in Google Scholar PubMed

Jin, K., Tang, Y., Liu, J., Wang, J., and Ye, C. (2021). Nanofibrillated cellulose as coating agent for food packaging paper. Int. J. Biol. Macromol. 168: 331–338, https://doi.org/10.1016/j.ijbiomac.2020.12.066.Suche in Google Scholar PubMed

Jindal, M.K. (2010). Unpacking the packaging: environmental impact of packaging wastes. J. Environ. Res. Dev. 4: 1084–1092.Suche in Google Scholar

Khan, A., Kumar, V., Anulare, J., Dam, M., Wyman, I., Mayekar, P., and Rabnawaz, M. (2024). Sustainable packaging with waterborne acrylated epoxidized soybean oil. ACS Sustain. Resour. Manag. 1: 879–889, https://doi.org/10.1021/acssusresmgt.3c00093.Suche in Google Scholar

Krishania, M., Kumar, V., and Sangwan, R.S. (2018). Integrated approach for extraction of xylose, cellulose, lignin and silica from rice straw. Bioresour. Technol. Rep. 1: 89–93, https://doi.org/10.1016/j.biteb.2018.01.001.Suche in Google Scholar

Lambert, M.A., Wahl, H., Bosman, C.E., Louw, T.M., Auret, L., and Görgens, J.F. (2024). The effect of operating conditions on neutral sulphite semi-chemical pulping properties: an industrial pilot plant study. Cellulose 31: 8221–8234, https://doi.org/10.1007/s10570-024-06091-5.Suche in Google Scholar

Lengowski, E.C., Bonfatti Júnior, E.A., Simon, L., de Muñiz, G.I., de Andrade, A.S., Nisgoski, S., and Klock, U. (2020). Different degree of fibrillation: strategy to reduce permeability in nanocellulose-starch films. Cellulose 27: 1–18, https://doi.org/10.1007/s10570-020-03232-4.Suche in Google Scholar

Lengowski, E.C., Bonfatti Júnior, E.A., Simon, L.C., Izidio, V.M.C., Andrade, A.S.d., Nisgoski, S., and Muniz, G.I.B.D. (2024). Unbleached nanofibrillated cellulose as additive and coating for kraft paper. Coatings 14: 962, https://doi.org/10.3390/coatings14080962.Suche in Google Scholar

Li, A., Xu, D., Luo, L., Zhou, Y., Yan, W., Leng, X., Dai, D., Zhou, Y., Ahmad, H., Rao, J., et al.. (2021). Overview of nanocellulose as additives in paper processing and paper products. Nanotechnol. Rev. 10: 264–281, https://doi.org/10.1515/ntrev-2021-0023.Suche in Google Scholar

Liu, H., Yano, H., and Abe, K. (2022). Reinforcement of cellulose nanofibers on the stiffness and strength of composite sheets under dry and wet conditions. Res. Square, https://doi.org/10.21203/rs.3.rs-1333800/v1.Suche in Google Scholar

Louis, A.C.F., Venkatachalam, S., and Gupta, S. (2022). Innovative strategy for rice straw valorization into nanocellulose and nanohemicellulose and its application. Ind. Crops Prod. 179: 114695, https://doi.org/10.1016/j.indcrop.2022.114695.Suche in Google Scholar

Merayo, N., Balea, A., de la Fuente, E., Blanco, Á., and Negro, C. (2017). Synergies between cellulose nanofibers and retention additives to improve recycled paper properties and the drainage process. Cellulose 24: 2987–3000, https://doi.org/10.1007/s10570-017-1302-1.Suche in Google Scholar

Östlund, S. (2017). Published. Three-dimensional deformation and damage mechanisms in forming of advanced structures in paper. In: Batchelor, W. and Söderberg, D. (Eds.), Advances in pulp and paper research, transactions of the 16th fundamental research symposium. Oxford, 2017. FRC, Manchester, pp. 489–594.10.15376/frc.2017.2.489Suche in Google Scholar

Petroudy, S.R.D., Syverud, K., Chinga-Carrasco, G., Ghasemain, A., and Resalati, H. (2014). Effects of bagasse microfibrillated cellulose and cationic polyacrylamide on key properties of bagasse paper. Carbohydr. Polym. 99: 311–318, https://doi.org/10.1016/j.carbpol.2013.07.073.Suche in Google Scholar PubMed

Saini, S., Kardam, S.K., Kadam, A.A., Kumar, V., and Gaikwad, K.K. (2022). Green and energy-efficient extraction of cellulose nano-fibrils from rice straw and its coating to improve functional properties of rice straw paperboard made via refiner mechanical pulping. Prog. Org. Coat. 165: 106747, https://doi.org/10.1016/j.porgcoat.2022.106747.Suche in Google Scholar

Salas, C., Hubbe, M., and Rojas, O.J. (2019). Nanocellulose applications in papermaking. In: Production of materials from sustainable biomass resources. Springer, Singapore.10.1007/978-981-13-3768-0_3Suche in Google Scholar

Sanchez-Salvador, J.L., Balea, A., Monte, M.C., Negro, C., Miller, M., Olson, J., and Blanco, A. (2020). Comparison of mechanical and chemical nanocellulose as additives to reinforce recycled cardboard. Sci. Rep. 10: 3778, https://doi.org/10.1038/s41598-020-60507-3.Suche in Google Scholar PubMed PubMed Central

Sawhney, D., Vaid, S., Bangotra, R., Sharma, S., Dutt, H.C., Kapoor, N., Mahajan, R., and Bajaj, B.K. (2023). Proficient bioconversion of rice straw biomass to bioethanol using a novel combinatorial pretreatment approach based on deep eutectic solvent, microwave irradiation and laccase. Bioresour. Technol. 375: 128791, https://doi.org/10.1016/j.biortech.2023.128791.Suche in Google Scholar PubMed

Sharma, N., Allardyce, B.J., Rajkhowa, R., and Agrawal, R. (2023). Rice straw-derived cellulose: a comparative study of various pre-treatment technologies and its conversion to nanofibres. Sci. Rep. 13: 16327, https://doi.org/10.1038/s41598-023-43535-7.Suche in Google Scholar PubMed PubMed Central

Shyamsundar, P., Springer, N., Tallis, H., Polasky, S., Jat, M.L., Sidhu, H.S., Krishnapriya, P., Skiba, N., Ginn, W., Ahuja, V., et al.. (2019). Fields on fire: alternatives to crop residue burning in India. Science 365: 536–538, https://doi.org/10.1126/science.aaw4085.Suche in Google Scholar PubMed

Spagnuolo, L., D’Orsi, R., and Operamolla, A. (2022). Nanocellulose for paper and textile coating: the importance of surface chemistry. ChemPlusChem 87: e202200204, https://doi.org/10.1002/cplu.202200204.Suche in Google Scholar PubMed

Taipale, T., Österberg, M., Nykänen, A., Ruokolainen, J., and Laine, J. (2010). Effect of microfibrillated cellulose and fines on the drainage of kraft pulp suspension and paper strength. Cellulose 17: 1005–1020, https://doi.org/10.1007/s10570-010-9431-9.Suche in Google Scholar

Tanpichai, S., Witayakran, S., Srimarut, Y., Woraprayote, W., and Malila, Y. (2019). Porosity, density and mechanical properties of the paper of steam exploded bamboo microfibers controlled by nanofibrillated cellulose. J. Mater. Res. Technol. 8: 3612–3622, https://doi.org/10.1016/j.jmrt.2019.05.024.Suche in Google Scholar

Tarasov, D., Leitch, M., and Fatehi, P. (2017). Thermal properties of lignocellulosic precipitates from neutral sulfite semichemical pulping process. Fuel Process. Technol. 158: 146–153, https://doi.org/10.1016/j.fuproc.2016.12.017.Suche in Google Scholar

Tozluoglu, A. and Poyraz, B. (2016). Effects of cellulose micro/nanofibers as paper additives in kraft and kraft-NaBH4pulps. Nord. Pulp Paper Res. J. 31: 561–572, https://doi.org/10.3183/NPPRJ-2016-31-04-p561-572.Suche in Google Scholar

Tozluoglu, A., Fidan, H., Tutuş, A., Arslan, R., Sertkaya, S., Poyraz, B., Küçük, S., Sözbir, T., Yemşen, B., and Gücüş, M.O. (2021). Reinforcement potential of modified nanofibrillated cellulose in recycled paper production. BioRes 16: 911, https://doi.org/10.15376/biores.16.1.911-941.Suche in Google Scholar

Vallejos, M.E., Felissia, F.E., Area, M.C., Ehman, N.V., Tarrés, Q., and Mutjé, P. (2016). Nanofibrillated cellulose (CNF) from eucalyptus sawdust as a dry strength agent of unrefined eucalyptus handsheets. Carbohydr. Polym. 139: 99–105, https://doi.org/10.1016/j.carbpol.2015.12.004.Suche in Google Scholar PubMed

Viana, L.C., Potulski, D.C., Muniz, G.I.B.D., Andrade, A.S.D., and Silva, E.L.D. (2018). Nanofibrillated cellulose as an additive for recycled paper. Cerne 24: 140–148, https://doi.org/10.1590/01047760201824022518.Suche in Google Scholar

Wang, W., Gu, F., Deng, Z., Zhu, Y., Zhu, J., Guo, T., Song, J., and Xiao, H. (2021). Multilayer surface construction for enhancing barrier properties of cellulose-based packaging. Carbohydr. Polym. 255: 117431, https://doi.org/10.1016/j.carbpol.2020.117431.Suche in Google Scholar PubMed

Zhai, W., Zhong, Y., Xu, M., Wei, X., Cai, L., Xia, C., and Wei, Y. (2024). An antioxidant, reusable laser printed and recycled Cork paper packaging. Adv. Funct. Mater. 34: 2401820, https://doi.org/10.1002/adfm.202401820.Suche in Google Scholar

Zimmermann, T., Bordeanu, N., and Strub, E. (2010). Properties of nanofibrillated cellulose from different raw materials and its reinforcement potential. Carbohydr. Polym. 79: 1086–1093, https://doi.org/10.1016/j.carbpol.2009.10.045.Suche in Google Scholar
Received: 2025-05-23
Accepted: 2025-07-12
Published Online: 2025-08-06
Published in Print: 2025-12-17

© 2025 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Chemical Pulping
  3. Alkali-extracted spruce bark residues for pulping and making of pulp sheets
  4. Applications of cationic bamboo fibers for the effective reinforcements of secondary fibers
  5. Paper Technology
  6. Improving hydrophobicity and mechanical strength of rice straw paper using chitosan nanoparticles and beeswax coatings
  7. Extended wet pressing at elevated temperature enables enhanced dewatering for tissue and linerboard
  8. Tissue paper from cabbage leaf – waste paper mixtures
  9. Inhibition of hornification in simao pine fibers and recycled paper with different beating degrees by microwave expansion treatment
  10. Preparation of mycelium paper sheets and study on their adsorption properties
  11. Paper Physics
  12. Influence of the hybrid effect on the mechanical properties of pulp molds
  13. Paper Chemistry
  14. Response surface methodology optimization and anti-age properties in paper protection of carboxymethyl cellulose grafted with β –cyclodextrin
  15. Printing
  16. Green innovations in natural paper ink: trends, applications, and future prospects
  17. Packaging
  18. Advanced moisture strategy for expanded formability in paper-based packaging
  19. Production of packaging paper from Populus deltoides NSSC pulp reinforced with rice straw cellulose nanofibrils
  20. Environmental Impact
  21. Treatment of regenerated papermaking wastewater by sequencing batch moving bed biofilm reactor and kinetics study
https://doi.org/10.1515/npprj-2025-0035
Schlagwörter für diesen Artikel
NSSC pulp; cellulose nanofibril (CNF); packaging paper; Populus deltoides; rice straw

Artikel in diesem Heft

  1. Frontmatter
  2. Chemical Pulping
  3. Alkali-extracted spruce bark residues for pulping and making of pulp sheets
  4. Applications of cationic bamboo fibers for the effective reinforcements of secondary fibers
  5. Paper Technology
  6. Improving hydrophobicity and mechanical strength of rice straw paper using chitosan nanoparticles and beeswax coatings
  7. Extended wet pressing at elevated temperature enables enhanced dewatering for tissue and linerboard
  8. Tissue paper from cabbage leaf – waste paper mixtures
  9. Inhibition of hornification in simao pine fibers and recycled paper with different beating degrees by microwave expansion treatment
  10. Preparation of mycelium paper sheets and study on their adsorption properties
  11. Paper Physics
  12. Influence of the hybrid effect on the mechanical properties of pulp molds
  13. Paper Chemistry
  14. Response surface methodology optimization and anti-age properties in paper protection of carboxymethyl cellulose grafted with β –cyclodextrin
  15. Printing
  16. Green innovations in natural paper ink: trends, applications, and future prospects
  17. Packaging
  18. Advanced moisture strategy for expanded formability in paper-based packaging
  19. Production of packaging paper from Populus deltoides NSSC pulp reinforced with rice straw cellulose nanofibrils
  20. Environmental Impact
  21. Treatment of regenerated papermaking wastewater by sequencing batch moving bed biofilm reactor and kinetics study
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 18.11.2025 von https://www.degruyterbrill.com/document/doi/10.1515/npprj-2025-0035/pdf?lang=de
Button zum nach oben scrollen