Tissue paper from cabbage leaf – waste paper mixtures
-
Muthumari Perumal
,
Varalakshmi Varatharajan
Abstract
Wood has traditionally been the primary raw material for papermaking, but its use contributes to deforestation. Vegetable waste offers a sustainable alternative for the paper industry. This study explores the potential of cabbage waste combined with wastepaper in varying compositions (20–100 wt% at 20 wt% intervals) for paper production. The prepared tissue papers were evaluated for grammage, thickness, tensile strength, burst strength, moisture content, and FTIR analysis. Results showed that increasing cabbage leaf content led to a decrease in grammage and thickness indicating reduced fibre density and increased porosity. The optimum tensile strength (3.33 Nm/g) and burst strength (6 kPa m2/g) were observed at 60 wt% cabbage leaves, suggesting enhanced fibre bonding and structural integrity at this composition. Beyond this threshold, mechanical properties declined due to weaker fibre interactions. Moisture content increased up to 60 wt% (7.4 %), then decreased at higher cabbage leaf proportions, balancing water retention and porosity. FTIR analysis revealed the presence of cellulose fibers and polysaccharide functional groups in the prepared tissue paper. The obtained results showed that 60 wt% cabbage leaf mixtures provide an optimal combination of strength, flexibility, and moisture control, making them suitable for tissue paper applications.
Acknowledgments
The authors have no acknowledgments to declare for this study.
-
Research ethics: This research was conducted following ethical guidelines and standards. No human or animal subjects were involved in this study.
-
Informed consent: Not applicable, as this study did not involve human participants.
-
Author contributions: Muthumari Perumal: Conceptualization, Writing – original manuscript, Validation and Supervision. Varalakshmi Varatharajan: Methodology. Senthil kumaar Jayalakshmi Sellappan – Reviewing. Kiruthick Balu Kaliraj and Madhavan Seenivasan – Editing.
-
Use of Large Language Models, AI and Machine Learning Tools: No AI, machine learning, or large language models were used in the research process or manuscript preparation.
-
Conflict of interest: The authors declare no conflicts of interest related to this study.
-
Research funding: The authors received no financial support for this research.
-
Data availability: The data generated and analyzed during this study are available from the corresponding author upon reasonable request.
References
Abdullah, M., Majid, R.A., Zaiton, S.N.A., Mustam, M.M., Khalid, A.K., and Azman, H.A. (2021). Paper production using Acacia auriculiformis leaf. In: AIP conf. proc., Vol. 2339. AIP Publishing, Melville, NY, p. 020081.10.1063/5.0044201Suche in Google Scholar
Afiqah, A.N., Sapuan, S.M., and Ilyas, R.A. (2021). Pulp and paper production: a review. Semin. Adv. Bio.-Miner. Based Nat. Fibre Compos.: 978–983.Suche in Google Scholar
Akgül, M., Erdönmez, İ., Çiçekler, M., and Tutuş, A. (2018). The investigations on pulp and paper production with modified kraft pulping method from canola (Brassica napus L.) stalks. Kastamonu Univ. J. For. Fac. 18: 357–365, https://doi.org/10.17475/kastorman.499091.Suche in Google Scholar
Alam, M., Rikta, S.Y., Bahauddin, K.M., Hasnine, T., and Kamal, A.K.I. (2018). Production of ecofriendly handmade paper from waste paper and other local biomass material. Acad. J. Environ. Sci. 6: 147–155.Suche in Google Scholar
Alavi, S., Chen, P., and Wang, L. (2021). Evaluation of lignocellulosic content in vegetable waste for pulp and paper production. Waste Biomass Valorization 12: 613–623.10.1007/s12649-020-01048-8Suche in Google Scholar
Al-Sulaimani, K. and Dwivedi, P.B. (2017). Production of handmade papers from sugar cane bagasse and banana fibers in Oman. Int. J. Stud. Res. Technol. Manag. 5: 16–20, https://doi.org/10.18510/ijsrtm.2017.534.Suche in Google Scholar
Aremu, M.O., Rafiu, M.A., and Adedeji, K.K. (2015). Pulp and paper production from Nigerian pineapple leaves and corn straw as substitute to wood source. Int. Res. J. Eng. Technol. (IRJET). 2: 1180–1188.Suche in Google Scholar
Balliu, A. (2014). Cabbage. Handb. Vegetables, Vol. 3. Studium Press LLC, Glendale, pp. 79–121.Suche in Google Scholar
Bibi Nausheen, J., Pratima, K., and Dinesh, S. (2024). Evaluating the effectiveness of starch reinforcement in paper production from tropical plant fibers. Chem. Pap. 79: 1–14, https://doi.org/10.1007/s11696-024-03776-w.Suche in Google Scholar
Cushman-Roisin, B. and Cremonini, B.T. (2021). Data, statistics, and useful numbers for environmental sustainability: bringing the numbers to life. Elsevier, Amsterdam.Suche in Google Scholar
Ekhuemelo, D.O. and Tor, K. (2013). Assessment of fibre characteristics and suitability of maize husk and stalk for pulp and paper production. J. Res. For. Wildl. Environ. 5: 41–49.Suche in Google Scholar
Hao, J., Deng, C., Wang, X., and Hu, J. (2014). Study of dispersion characteristics of mercerized pulp. BioResources 9: 4336–4342, https://doi.org/10.15376/biores.9.3.4336-4342.Suche in Google Scholar
Hospodarova, V., Singovszka, E., Stevulova, N. (2018). Characterization of cellulosic fibers by FTIR spectroscopy for their further implementation to building materials: 303–310, https://doi.org/10.4236/ajac.2018.96023.Suche in Google Scholar
Jaffur, N. and Jeetah, P. (2019). Production of low-cost paper from Pandanus utilis fibres as a substitution to wood. Sustain. Environ. Res. 29: 1–10, https://doi.org/10.1186/s42834-019-0023-6.Suche in Google Scholar
Kulkarni, H.D. (2013). Pulp and paper industry raw material scenario–Itc plantation a case study. IIPTA. 25: 79–90.Suche in Google Scholar
Markevičiūtė, Z. and Varžinskas, V. (2022). Plant-origin feedstock applications in fully green food packaging: the potential for tree-free paper and plant-origin bio-plastics in the Baltic sea region. Sustainability 14: 7393, https://doi.org/10.3390/su14127393.Suche in Google Scholar
Morais, F.P. and Curto, J.M. (2022). Challenges in computational materials modelling and simulation: a case study to predict tissue paper properties. Heliyon 8: e09356, https://doi.org/10.1016/j.heliyon.2022.e09356.Suche in Google Scholar PubMed PubMed Central
Pydimalla, M., Kamma, R., and Mamidala, A. (2022). A review on morphological, chemical and structural properties of wood and non-wood fiber species. La Pensée 51: 229–239.Suche in Google Scholar
Rani, S., Singh, A., and Kashyap, P. (2018). Pulp and paper making from grass fibre. J. Emerg. Technol. Innov. Res. 5: 521–523.Suche in Google Scholar
Rhim, J.W. (2010). Effect of moisture content on tensile properties of paper-based food packaging materials. Food Sci. Biotechnol. 19: 243–247, https://doi.org/10.1007/s10068-010-0034-x.Suche in Google Scholar
Román-Gutiérrez, A.D., Duana-Ávila, D., Hernández-Ávila, J., Cerecedo-Saenz, E., Salinas-Rodríguez, E., Rojas-León, A., and López Perea, P. (2022). Reuse of barley straw for handmade paper production. Sustainability 14: 12691, https://doi.org/10.3390/su141912691.Suche in Google Scholar
Sibaly, S. and Jeetah, P. (2017). Production of paper from pineapple leaves. J. Environ. Chem. Eng. 5: 5978–5986, https://doi.org/10.1016/j.jece.2017.11.026.Suche in Google Scholar
Srivastava, P. (2021). Experimental characterization of tissue structure and the impact of forming fabric on tissue properties, Doctoral dissertation. Vancouver, Univ. British Columbia.Suche in Google Scholar
Wang, H., Chen, X., and Sun, J. (2018). Research on properties of the edible Chinese cabbage paper packing. Int. J. Food Engineering 14: 1–9.Suche in Google Scholar
Worku, L.A., Bachheti, A., Bachheti, R.K., Rodrigues Reis, C.E., and Chandel, A.K. (2023). Agricultural residues as raw materials for pulp and paper production: overview and applications on membrane fabrication. Membranes 13: 228, https://doi.org/10.3390/membranes13020228.Suche in Google Scholar PubMed PubMed Central
Xia, G., Wan, J., Zhang, J., Zhang, X., Xu, L., Wu, J., He, J., and Zhang, J. (2016). Cellulose-based films prepared directly from waste newspapers via anionic liquid. Carbohydr. Polym. 151: 223–229, https://doi.org/10.1016/j.carbpol.2016.05.080.Suche in Google Scholar PubMed
© 2025 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Chemical Pulping
- Alkali-extracted spruce bark residues for pulping and making of pulp sheets
- Applications of cationic bamboo fibers for the effective reinforcements of secondary fibers
- Paper Technology
- Improving hydrophobicity and mechanical strength of rice straw paper using chitosan nanoparticles and beeswax coatings
- Extended wet pressing at elevated temperature enables enhanced dewatering for tissue and linerboard
- Tissue paper from cabbage leaf – waste paper mixtures
- Inhibition of hornification in simao pine fibers and recycled paper with different beating degrees by microwave expansion treatment
- Preparation of mycelium paper sheets and study on their adsorption properties
- Paper Physics
- Influence of the hybrid effect on the mechanical properties of pulp molds
- Paper Chemistry
- Response surface methodology optimization and anti-age properties in paper protection of carboxymethyl cellulose grafted with β –cyclodextrin
- Printing
- Green innovations in natural paper ink: trends, applications, and future prospects
- Packaging
- Advanced moisture strategy for expanded formability in paper-based packaging
- Production of packaging paper from Populus deltoides NSSC pulp reinforced with rice straw cellulose nanofibrils
- Environmental Impact
- Treatment of regenerated papermaking wastewater by sequencing batch moving bed biofilm reactor and kinetics study
Artikel in diesem Heft
- Frontmatter
- Chemical Pulping
- Alkali-extracted spruce bark residues for pulping and making of pulp sheets
- Applications of cationic bamboo fibers for the effective reinforcements of secondary fibers
- Paper Technology
- Improving hydrophobicity and mechanical strength of rice straw paper using chitosan nanoparticles and beeswax coatings
- Extended wet pressing at elevated temperature enables enhanced dewatering for tissue and linerboard
- Tissue paper from cabbage leaf – waste paper mixtures
- Inhibition of hornification in simao pine fibers and recycled paper with different beating degrees by microwave expansion treatment
- Preparation of mycelium paper sheets and study on their adsorption properties
- Paper Physics
- Influence of the hybrid effect on the mechanical properties of pulp molds
- Paper Chemistry
- Response surface methodology optimization and anti-age properties in paper protection of carboxymethyl cellulose grafted with β –cyclodextrin
- Printing
- Green innovations in natural paper ink: trends, applications, and future prospects
- Packaging
- Advanced moisture strategy for expanded formability in paper-based packaging
- Production of packaging paper from Populus deltoides NSSC pulp reinforced with rice straw cellulose nanofibrils
- Environmental Impact
- Treatment of regenerated papermaking wastewater by sequencing batch moving bed biofilm reactor and kinetics study
