Frontmatter

Articles in the same Issue

1. Frontmatter
2. A holistic view on materials
3. Influence of pulsed laser beam welding in vacuum on the mechanical properties of non-grain oriented electrical steel sheets
4. Fracture characteristics of various concrete composites containing polypropylene fibers through five fracture mechanics methods
5. Influence of heat input on hot cracking sensitivity of the EA395-9 filler metal
6. Effects of cubic boron nitride (c-BN) nanoparticle addition on the wear properties of carbon FRP composites
7. Fatigue performances of helicopter gears
8. Surface quality improvement at selective laser melting AlSi₁₀Mg by optimizing single point diamond turning parameters
9. Effect of diffusion bonding time on microstructure and mechanical properties of dissimilar Ti6Al4V titanium alloy and AISI 304 austenitic stainless steel joints
10. Deformation mechanism of AZ91 alloy during compression at different temperatures
11. Tensile shear fracture load bearing capability, softening of HAZ and microstructural characteristics of resistance spot welded DP-1000 steel joints
12. Nanoparticle effects on post-buckling behaviour of patched hybrid composites
13. High-speed tensile tests on high-manganese steel at low temperatures
14. A novel hybrid flow direction optimizer-dynamic oppositional based learning algorithm for solving complex constrained mechanical design problems
15. Effect of the substrate surface and coating powder hardness on the formation of a cold sprayed composite layer