Friction welding of high Cr white cast iron to AISI 1030 steel with Ni interlayer
-
Tanju Teker
Prof. Dr. Tanju Teker, born in 1971, works in the University of Sivas Cumhuriyet, Faculty of Technology, Department of Manufacturing Engineering, Sivas, Turkey. He graduated in Metallurgy Education from Gazi University, Ankara, Turkey, in 1997. He received his MSc and PhD degrees from Firat University, Elazig, Turkey in 2004 and 2010, respectively. His research interests include metal coating techniques, fusion and welding solid-state welding methods and materials.
und
Eyyüp Murat Karakurt
Eyyüp Murat Karakurt, born in 1988, graduated from Gebze High Technology University, Faculty of Engineering, Materials Science Engineering Department, Gebze, Turkey in 2011. He received his MSc degree from Adiyaman University, Adiyaman, Turkey in 2017. He is currently studying at Brunel London University, Institute of Materials and Manufacturing, Uxbridge, London. His research interests are focused on boring and welding.
Abstract
In this study, the effect of friction time on microstructure and weldability of AISI 1030 steel with nickel interlayer and high chromium white cast iron welded by the friction welding method were investigated experimentally. The weld joints were produced with 2000 rpm rotational speed, under 80 MPa friction pressure, 150 MPa forging pressure, for 8 s forging time and 8, 10 and 12 s friction times. After the friction welding process, the microstructures of the weld interfaces were analyzed by optical microscopy, scanning electron microscopy, energy dispersive spectrometry, elemental mapping and X-ray diffraction analysis. The results were lateron compared theoretically and experimentally. The increasing friction time led to high frictional heat input. The results indicated that friction time plays a vital role on the microstructure and weldability.
Funding statement: This work has been supported by Adıyaman University, Scientific Researches Unit [grant number 2016-002]. The authors are grateful to the Scientific Researches Unit for providing financial support.
About the authors
Prof. Dr. Tanju Teker, born in 1971, works in the University of Sivas Cumhuriyet, Faculty of Technology, Department of Manufacturing Engineering, Sivas, Turkey. He graduated in Metallurgy Education from Gazi University, Ankara, Turkey, in 1997. He received his MSc and PhD degrees from Firat University, Elazig, Turkey in 2004 and 2010, respectively. His research interests include metal coating techniques, fusion and welding solid-state welding methods and materials.
Eyyüp Murat Karakurt, born in 1988, graduated from Gebze High Technology University, Faculty of Engineering, Materials Science Engineering Department, Gebze, Turkey in 2011. He received his MSc degree from Adiyaman University, Adiyaman, Turkey in 2017. He is currently studying at Brunel London University, Institute of Materials and Manufacturing, Uxbridge, London. His research interests are focused on boring and welding.
References
1 T. Sawai, K. Ogawa, H. Yamaguchi, H. Ochi, Y. Yamamoto, Y. Suga: Evaluation of joint strength of friction welded carbon steel by heat input, Welding International 16 (2002), No. 6, pp. 432-441 DOI:10.1080/0950711020954955610.1080/09507110209549556Suche in Google Scholar
2 N. Özdemir: Investigation of the mechanical properties of friction-welded joints between AISI 304 L and AISI 4340 steel as a function rotational speed, Materials Letters 259 (2005), No. 19, pp. 2504-2509 DOI:10.1016/j.matlet.2005.03.03410.1016/j.matlet.2005.03.034Suche in Google Scholar
3 R. Paventhan, P. R. Lakshminarayanan, V. Balasubramanian: Fatigue behaviour of friction welded medium carbon steel and austenitic stainless steel dissimilar joints, Materials Design 32 (2011), No. 4, pp. 1888-1894 DOI:10.1016/j.matdes.2010.12.01110.1016/j.matdes.2010.12.011Suche in Google Scholar
4 N. Arivazhagan, K. Senthilkumaran, S. Narayanan, K. Devendranath Ramkumar, S. Surendra, S. Prakash: Hot corrosion behavior of friction welded AISI4140 and AISI304 in K2SO-60 % NaCl mixture, Journal of Materials Science and Technology 28 (2012), No. 10, pp. 895-904 DOI:10.1016/S1005-0302(12)60148-010.1016/S1005-0302(12)60148-0Suche in Google Scholar
5 R. Damodaram, S. G. S. Raman, K. P. Rao: Microstructure and mechanical properties of friction welded alloy 718, Materials Science Engineering A 560 (2013), pp. 781-786 DOI:10.1016/j.msea.2012.10.03510.1016/j.msea.2012.10.035Suche in Google Scholar
6 C. H. Muralimohan, V. Muthupandi, K. Sivaprasad: Properties of friction welding titanium-stainless steel joints with a nickel interlayer, Procedia Materials Science 5 (2014), pp. 1120-1129 DOI:10.1016/j.mspro.2014.07.40610.1016/j.mspro.2014.07.406Suche in Google Scholar
7 D. Ananthapadmanaban, V. Seshagiri Rao, N. Abraham, K. P. Rao: A study of mechanical properties of friction welded mild steel to stainless steel joints, Materials Design 30 (2009), No. 7, pp. 2642-2646 DOI:10.1016/j.matdes.2008.10.03010.1016/j.matdes.2008.10.030Suche in Google Scholar
8 Y. Matsubara, N. Sasaguri, K. Shimizu, S. K. Yu: Solidification and abrasion wear of white cast irons alloyed with 20 % carbide forming elements, Wear 250 (2001), No. 1-12, pp. 502-510 DOI:10.1016/S0043-1648(01)00599-310.1016/S0043-1648(01)00599-3Suche in Google Scholar
9 J. C. Lippold, D. J. Kotecki: Welding metallurgy and weldability of stainless steels, Wiley, New York, USA (2005), pp. 287-307Suche in Google Scholar
10 T. Teker: Evaluation of the metallurgical and mechanical properties of friction-welded joints of dissimilar metal combinations AISI2205/ Cu, The International Journal of Advanced Manufacturing Technolog 66 (2013), No. 1-4, pp. 303-310 DOI:10.1007/s00170-012-4325-710.1007/s00170-012-4325-7Suche in Google Scholar
11 Z. W. Huang, H. Y. Li, M. Preuss, M. Karadge, P. Bowen, S. Bray, G. Baxter: Inertia friction welding dissimilar nickel-based superalloys alloy 720Li to IN718, Metallurgicall Materials Transactions A 38 (2007), No. 7, pp. 1608-1620 DOI:10.1007/s11661-007-9194-610.1007/s11661-007-9194-6Suche in Google Scholar
12 S. Celik, I. Ersozlu: Investigation of the mechanical properties and microstructure of friction welded joints between AISI 4140 and AISI 1050 steels, Materials Design 30 (2009), No. 4, pp. 970-976 DOI:10.1016/j.matdes.2008.06.07010.1016/j.matdes.2008.06.070Suche in Google Scholar
13 S. G. Sapate, A. V. RamaRao: Erosive wear behaviour of weld hardfacing high chromium cast irons: Effect of erodent particle, Tribology International 39 (2006), No. 3, pp. 206-212 DOI:10.1016/j.triboint.2004.10.01310.1016/j.triboint.2004.10.013Suche in Google Scholar
14 S. D. Meshram, G. M. Reddy: Friction welding of AA6061 to AISI 4340 using silver interlayer, Defence Technology 11 (2015), No. 3, pp. 292-298 DOI:10.1016/j.dt.2015.05.00710.1016/j.dt.2015.05.007Suche in Google Scholar
15 K. Gao, X. Qin, Z. Wang, S. Zhu: Effect of spot continual induction hardening on the microstructure of steels: Comparison between AISI 1045 and 5140 steels, Materials Science Engineering A 651 (2016), pp. 535-547 DOI:10.1016/j.msea.2015.11.01210.1016/j.msea.2015.11.012Suche in Google Scholar
16 X. Li, J. Li, F. Jin, J. Xiong, F. Zhang .: Effect of rotation speed on friction behavior of rotary friction welding of AA6061-T6 aluminum alloy, Welding in the World 62 (2018), pp. 923-930 DOI:10.1007/s40194-018-0601-y10.1007/s40194-018-0601-ySuche in Google Scholar
17 S. Ozan: Torsional behavior of AISI 420/AISI 4340 steel friction welds, Materials Testing 56 (2014), No. 10, pp. 891-896 DOI:10.3139/120.11064810.3139/120.110648Suche in Google Scholar
18 T. Teker, S. O. Yılmaz, E. M Karakurt: Effect of different rotational speed on mechanical and metallurgical characterization of friction welded dissimilar steels, Materials Testing 60 (2018), No. 2, pp. 135-141 DOI:10.3139/120.11113510.3139/120.111135Suche in Google Scholar
19 C. H. Muralimohan, M. Ashfaq, R. Ashiri, V. Muthupandi, K. Sivaprasad: Analysis and characterization of the role of Ni interlayer in the friction welding of titanium and 304 austenitic stainless steel, Metallurgicall Materials Transactions A 47 (2016), No. 1, pp. 347-359 DOI:10.1007/s11661-015-3210-z10.1007/s11661-015-3210-zSuche in Google Scholar
20 S. Sam, S. Kundu, S, Chatterjee: Diffusion bonding of titanium alloy to micro-duplex stainless steel using a nickel alloy interlayer: Interface microstructure and strength properties, Materials Design 40 (2012), pp. 237-244 DOI:10.1016/j.matdes.2012.02.05810.1016/j.matdes.2012.02.058Suche in Google Scholar
21 A. Handa, V. Chawla: Investigation of mechanical properties of friction-welded AISI 304 with AISI 1021 dissimilar steels, The International Journal of Advanced Manufacturing Technology 75 (2014), No. 9-12, pp. 1493-1500 DOI:10.1007/s00170-014-6238-010.1007/s00170-014-6238-0Suche in Google Scholar
22 S. Senthil Murugan, A. Nourul Haq, P. Sathiya: Effect of welding parameters on the micro-structure and mechanical properties of the friction-welded dissimilar joints of AA6063 alloy and faying surface-tapered AISI304 L alloy, Welding in the World 64 (2020), pp. 483-499 DOI:10.1007/s40194-020-00846-x10.1007/s40194-020-00846-xSuche in Google Scholar
23 Y. Liu, H. Zhao, Y. Peng, X. Ma: Microstructure and tensile strength of aluminum/stainless steel joint welded by inertia friction and continuous drive friction, Welding in the World 64 (2020), pp. 1799-1809 DOI:10.1007/s40194-020-00960-w10.1007/s40194-020-00960-wSuche in Google Scholar
© 2021 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Contents
- Mechanical testing/materialography
- Development and properties of austempered low alloyed white cast iron
- Mechanical testing/analysis of physical and chemical properties
- Preparation and characterization of polydimethylsiloxane-based composite films
- Materialography
- Investigation of Cu whisker growth by molecular beam epitaxy
- Microstructure adjustment of an asymmetric ceramic membrane with high permeation performance
- Materials testing for joining and additive manufacturing applications
- Manual metal arc welding of dissimilar 30MnB5 and S 235 low alloyed steels for agricultural applications
- Failure analysis of simple overlap bonding joints and numerical investigation of the adhered tip geometry effect on the joint strength
- Friction welding of high Cr white cast iron to AISI 1030 steel with Ni interlayer
- Mechanical testing/corrosion testing/numerical simulations
- Pitting and CO2 corrosion behavior of oil and gas pipeline welds
- Component-oriented testing and simulation
- Optimal design of aerospace structures using recent meta-heuristic algorithms
- Mechanical testing/corrosion testing/wear testing
- Corrosion of brass subjected to cast-off cooking oil blended with diesel
- Optimization of casting parameters for improved mechanical properties of eggshell reinforced composites
- Mechanical testing
- Impact behavior of natural rubber based syntactic foam core sandwich structures
- Microstructure and mechanical properties of a semi-centrifugal compression processed Al6013 and Cu bimetal
- Comparative study of destructive, nondestructive, and numerical procedures for the determination of moisture dependent shear moduli in Scots pine wood
- Materials testing for civil engineering applications
- Effects of rice husk ash on itself activity and concrete behavior at different preparation temperatures
Artikel in diesem Heft
- Contents
- Mechanical testing/materialography
- Development and properties of austempered low alloyed white cast iron
- Mechanical testing/analysis of physical and chemical properties
- Preparation and characterization of polydimethylsiloxane-based composite films
- Materialography
- Investigation of Cu whisker growth by molecular beam epitaxy
- Microstructure adjustment of an asymmetric ceramic membrane with high permeation performance
- Materials testing for joining and additive manufacturing applications
- Manual metal arc welding of dissimilar 30MnB5 and S 235 low alloyed steels for agricultural applications
- Failure analysis of simple overlap bonding joints and numerical investigation of the adhered tip geometry effect on the joint strength
- Friction welding of high Cr white cast iron to AISI 1030 steel with Ni interlayer
- Mechanical testing/corrosion testing/numerical simulations
- Pitting and CO2 corrosion behavior of oil and gas pipeline welds
- Component-oriented testing and simulation
- Optimal design of aerospace structures using recent meta-heuristic algorithms
- Mechanical testing/corrosion testing/wear testing
- Corrosion of brass subjected to cast-off cooking oil blended with diesel
- Optimization of casting parameters for improved mechanical properties of eggshell reinforced composites
- Mechanical testing
- Impact behavior of natural rubber based syntactic foam core sandwich structures
- Microstructure and mechanical properties of a semi-centrifugal compression processed Al6013 and Cu bimetal
- Comparative study of destructive, nondestructive, and numerical procedures for the determination of moisture dependent shear moduli in Scots pine wood
- Materials testing for civil engineering applications
- Effects of rice husk ash on itself activity and concrete behavior at different preparation temperatures
