Home Technology Materials Testing
Article
Licensed
Unlicensed Requires Authentication

Materials Testing

Materialprüfung
Published/Copyright: January 27, 2020
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Materials Testing
From the journal Materials Testing Volume 62 Issue 2

Published Online: 2020-01-27
Published in Print: 2020-02-03

© 2020 by Walter de Gruyter Berlin/Boston

Articles in the same Issue

  1. Inhalt/Contents
  2. Contents
  3. Fachbeiträge/Technical Contributions
  4. Metallurgical Evaluation and Failure Analysis of Cracking in Wheel Rim SPFH590 Steel
  5. Fatigue behavior of two notched cutting tool materials – high speed steel and cemented carbide
  6. Early corrosion stage of welded carbon steel joints in CO2-saturated oilfield water
  7. Effect of quenching and tempering temperature on the tensile properties of low alloyed boron steel
  8. Mechanical and microstructural characterization of AA7178-TiB2 composites
  9. Deformation calibration mode based on the potential drop technique and strain gage measurements
  10. Process parameter optimization for the magnetic abrasive finishing of SS310s steel
  11. Structure and properties of a boronized crankshaft coating
  12. Microstructure and properties of fiber laser welded high strength steel butt joints
  13. Reusability of metallurgical slag waste in submerged arc welding powder for hardfacing
  14. Microstructure and thermal properties of Bi-Sn eutectic alloy
  15. Dry-sliding wear behavior of AISI 4140 barrel steel at elevated temperatures
  16. Process parameters, development and applications of stir cast composite: A review
  17. An algebraic-analytic model for the characterization of the frequency domain of photodiodes
  18. BEZUGSQUELLEN
  19. Materials Testing
https://doi.org/10.1515/mt-2020-0065

Articles in the same Issue

  1. Inhalt/Contents
  2. Contents
  3. Fachbeiträge/Technical Contributions
  4. Metallurgical Evaluation and Failure Analysis of Cracking in Wheel Rim SPFH590 Steel
  5. Fatigue behavior of two notched cutting tool materials – high speed steel and cemented carbide
  6. Early corrosion stage of welded carbon steel joints in CO2-saturated oilfield water
  7. Effect of quenching and tempering temperature on the tensile properties of low alloyed boron steel
  8. Mechanical and microstructural characterization of AA7178-TiB2 composites
  9. Deformation calibration mode based on the potential drop technique and strain gage measurements
  10. Process parameter optimization for the magnetic abrasive finishing of SS310s steel
  11. Structure and properties of a boronized crankshaft coating
  12. Microstructure and properties of fiber laser welded high strength steel butt joints
  13. Reusability of metallurgical slag waste in submerged arc welding powder for hardfacing
  14. Microstructure and thermal properties of Bi-Sn eutectic alloy
  15. Dry-sliding wear behavior of AISI 4140 barrel steel at elevated temperatures
  16. Process parameters, development and applications of stir cast composite: A review
  17. An algebraic-analytic model for the characterization of the frequency domain of photodiodes
  18. BEZUGSQUELLEN
  19. Materials Testing
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Winner of the OpenAthens UX Award 2026
Winner of the OpenAthens UX Award 2026
Have an idea on how to improve our website?
Please write us.
© 2026 De Gruyter Brill
Downloaded on 6.3.2026 from https://www.degruyterbrill.com/document/doi/10.1515/mt-2020-0065/html
Scroll to top button