Contents

Artikel in diesem Heft

1. Contents
2. Mechanical Testing
3. Deformation and damage behavior of lightweight steels at high rate multiaxial loading
4. Failure Analysis
5. Reheat cracking failure of a welded alloy 803 outlet pigtail tube used in a steam hydrocarbon reforming furnace
6. Production-Oriented Testing
7. Surface roughness of Ti6Al4V after heat treatment evaluated by artificial neural networks
8. Fatigue life of the magnesium alloy AZ31B under specific spectrum loading
9. Mechanical Testing
10. Optimization of welding parameters to attain maximum strength in friction stir welded AA7075 joints
11. Experimental investigations of Al-TiO₂-Gr hybrid composites fabricated by stir casting
12. Corrosion Testing/Failure Analysis
13. Microstructure investigation of premature corroded heat exchanger plates
14. Mechanical Testing
15. Investigation of deep-drilled micro-hole profiles in Hadfield steel
16. Wear Testing
17. Investigation of the abrasive wear behavior of an aluminum alloy and its Al₂O₃ particle reinforced composite by statistical analysis
18. Production-Oriented Testing
19. Optimization of process parameters for rectangular cup deep drawing by the Taguchi method and genetic algorithm
20. Fabrication of microstructured polymers by a simple biotemplate embossing method and their characterization
21. Fatigue testing/fractography/materialography
22. Performance of non-asbestos organic brake liners for light motor vehicles
23. Failure Analysis
24. Material optimization of a cemented tibia tray using functionally graded material
25. Mechanical Testing
26. Effect of agglomeration and dispersion on the elastic properties of polymer nanocomposites: A Monte Carlo finite element analysis
27. Production-Oriented Testing
28. Effects of machining parameters and reinforcement content on thrust force during drilling of hybrid composites