Study of a perforated hollow cylinder and twisted tape inserts as a compound device in a circular tube for heat transfer enhancement

References

Alimoradi, A., Fatahi, M., Rehman, S., Aliabadi, M.K., and Hassani, S.M. (2020). Effects of transversely twisted-turbulators on heat transfer and pressure drop of a channel with uniform wall heat flux. Chem. Eng. Process. Process Intensification 154: 108027, https://doi.org/10.1016/j.cep.2020.108027.Search in Google Scholar

Bas, H. and Ozceyhan, V. (2012). Heat transfer enhancement in a tube with twisted tape inserts placed separately from the tube wall. Exp. Therm. Fluid Sci. 41: 51–58, https://doi.org/10.1016/j.expthermflusci.2012.03.008.Search in Google Scholar

Bhuiya, M.M.K., Chowdhury, M.S.U., Shahabuddin, M., Saha, M., and Memon, L.A. (2013). Thermal characteristics in a heat exchanger tube fitted with triple twisted tape inserts. Int. Commun. Heat Mass Tran. 48: 124–132, https://doi.org/10.1016/j.icheatmasstransfer.2013.08.024.Search in Google Scholar

Bhuiya, M.M.K., Sayem, A.S.M., Islam, M., Chowdhury, M.S.U., and Shahabuddin, M. (2014). Performance assessment in a heat exchanger tube fitted with double counter twisted tape inserts. Int. Commun. Heat Mass Tran. 50: 25–33, https://doi.org/10.1016/j.icheatmasstransfer.2013.11.005.Search in Google Scholar

Chokphoemphun, S., Pimsarn, M., Thianpong, C., and Promvonge, P. (2015). Thermal performance of tubular heat exchanger with multiple twisted-tape inserts. Chin. J. Chem. Eng. 23: 755–762, https://doi.org/10.1016/j.cjche.2015.01.003.Search in Google Scholar

Deshmukh, P.W., Prabhu, S.V., and Vedula, R.P. (2016). Heat transfer enhancement for laminar flow in tubes using curved delta wing vortex generator inserts. Appl. Therm. Eng. 106: 1415–1426, https://doi.org/10.1016/j.applthermaleng.2016.06.120.Search in Google Scholar

Eiamsa-ard, S. and Promvonge, P. (2010). Thermal characteristics in round tube fitted with serrated twisted tape. Appl. Therm. Eng. 30: 1673–1682, https://doi.org/10.1016/j.applthermaleng.2010.03.026.Search in Google Scholar

Eiamsa-ard, S. and Promvonge, P. (2011). Influence of double-sided delta-wing tape insert with alternate-axes on flow and heat transfer characteristics in A heat exchanger tube. Fluid Flow Transp. Phenom. Chin. J. Chem. Eng. 19: 410–423, https://doi.org/10.1016/S1004-9541(11)60001-3.Search in Google Scholar

Eiamsa-ard, S., Thianpong, C., Eiamsa-ard, P., and Promvonge, P. (2009). Convective heat transfer in a circular tube with short-length twisted tape insert. Int. Commun. Heat Mass Tran. 36: 365–371, https://doi.org/10.1016/j.icheatmasstransfer.2009.01.006.Search in Google Scholar

Eiamsa-ard, S., Nivesrangsan, P., Chokphoemphun, S., and Promvonge, P. (2010a). Influence of combined non-uniform wire coil and twisted tape inserts on thermal performance characteristics. Int. Commun. Heat Mass Tran. 37: 850–856, https://doi.org/10.1016/j.icheatmasstransfer.2010.05.012.Search in Google Scholar

Eiamsa-ard, S., Thianpong, C., Eiamsa-ard, P., and Promvonge, P. (2010b). Thermal characteristics in a heat exchanger tube fitted with dual twisted tape elements in tandem. Int. Commun. Heat Mass Tran. 37: 39–46, https://doi.org/10.1016/j.icheatmasstransfer.2009.08.010.Search in Google Scholar

Eiamsa-ard, S., Kongkaitpaiboon, V., and Nanan, K. (2013). Thermohydraulics of turbulent flow through heat exchanger tubes fitted with circular-rings and twisted Tapes, fluid dynamics and transport phenomena. Chin. J. Chem. Eng. 21: 585–593, https://doi.org/10.1016/S1004-9541(13)60504-2.Search in Google Scholar

Kline, S. and McClintock, F. (1953). Describing uncertainties in single-sample experiments. Mech. Eng. 75: 3–8.Search in Google Scholar

Kongkaitpaiboon, V., Nanan, K., and Eiamsa-ard, S. (2010a). Experimental investigation of heat transfer and turbulent flow friction in a tube fitted with perforated conical-rings. Int. Commun. Heat Mass Tran. 37: 560–567, https://doi.org/10.1016/j.icheatmasstransfer.2009.12.015.Search in Google Scholar

Kongkaitpaiboon, V., Nanan, K., and Eiamsa-ard, S. (2010b). Experimental investigation of convective heat transfer and pressure loss in a round tube fitted with circular-ring turbulators. Int. Commun. Heat Mass Tran. 37: 568–574, https://doi.org/10.1016/j.icheatmasstransfer.2009.12.016.Search in Google Scholar

Kumar, A., Chamoli, S., and Kumar, M. (2016a). Experimental investigation on thermal performance and fluid flow characteristics in heat exchanger tube with solid hollow circular disk inserts. Appl. Therm. Eng. 100: 227–236, https://doi.org/10.1016/j.applthermaleng.2016.01.081.Search in Google Scholar

Kumar, A., Chamoli, S., Kumar, M., and Singh, S. (2016b). Experimental investigation on thermal performance and fluid flow characteristics in circular cylindrical tube with circular perforated ring inserts. Exp. Therm. Fluid Sci. 79: 168–174, https://doi.org/10.1016/j.expthermflusci.2016.07.002.Search in Google Scholar

Kumar, P., Kumar, A., Chamoli, S., and Kumar, M. (2016c). Experimental investigation of heat transfer enhancement and fluid flow characteristics in a protruded surface heat exchanger tube. Exp. Therm. Fluid Sci. 71: 42–51, https://doi.org/10.1016/j.expthermflusci.2015.10.014.Search in Google Scholar

Kumar, B., Srivastava, G.P., Kumar, M., and Patil, A.K. (2018). A review of heat transfer and fluid flow mechanism in heat exchanger tube with inserts. Chem. Eng. Process. Process Intensification 123: 126–137, https://doi.org/10.1016/j.cep.2017.11.007.Search in Google Scholar

Kumar, D., Patil, A.K., and Kumar, M. (2019). Experimental investigation of heat transfer and fluid flow in a circular tube with lanced ring insert. Exp. Heat Tran. 33: 560–571, https://doi.org/10.1080/08916152.2019.1691086.Search in Google Scholar

Mancin, S., Zilio, C., Drani, A., and Rossetto, L. (2012). Experimental air heat transfer and pressure drop through copper foams. Exp. Therm. Fluid Sci. 36: 224–232, https://doi.org/10.1016/j.expthermflusci.2011.09.016.Search in Google Scholar

Promvonge, P., Koolnapadol, N., Pimsarn, M., and Thianpong, C. (2014). Thermal performance enhancement in a heat exchanger tube fitted with inclined vortex rings. Appl. Therm. Eng. 62: 285–292, https://doi.org/10.1016/j.applthermaleng.2013.09.031.Search in Google Scholar

Samruaisin, P., Kunnarak, K., Chuwattanakul, V., and Eiamsa-ard, S. (2020a). Effect of sparsely placed twisted tapes installed with multiple-transverse twisted-baffles on heat transfer enhancement. J. Therm. Anal. Calorim. 140: 1159–1175, https://doi.org/10.1007/s10973-019-09202-8.Search in Google Scholar

Samruaisin, P., Wongcharee, K., Chuwattanakul, V., and Eiamsa-ard, S. (2020b). Silver–water nanofluid flow and convective heat transfer in a microfin tube equipped with loose-fit twisted tapes. J. Therm. Anal. Calorim. 140: 2541–2554, https://doi.org/10.1007/s10973-019-08984-1.Search in Google Scholar

Singh, S.K., Kumar, M., Kumar, A., Gautam, A., and Chamoli, S. (2018). Thermal and friction characteristics of a circular tube fitted with perforated hollow circular cylinder inserts. Appl. Therm. Eng. 130: 230–241, https://doi.org/10.1016/j.applthermaleng.2017.10.090.Search in Google Scholar

Skullong, S., Promvonge, P., Thianpong, C., and Pimsarn, M. (2016). Heat transfer and turbulent flow friction in a round tube with staggered-winglet perforated-tapes. Int. J. Heat Mass Tran. 95: 230–242, https://doi.org/10.1016/j.ijheatmasstransfer.2015.12.007.Search in Google Scholar

Srivastava, G.P., Patil, A.K., and Kumar, M. (2021). Parametric effect of diverging perforated cones on the thermo-hydraulic performance of a heat exchanger tube. Heat Mass Tran. 57: 1425–1437, https://doi.org/10.1007/s00231-021-03035-8.Search in Google Scholar

Verma, A., Kumar, M., and Patil, A.K. (2018). Enhanced heat transfer and frictional losses in heat exchanger tube with modified helical coiled inserts. Heat Mass Tran. 54: 3137–3150, https://doi.org/10.1007/s00231-018-2347-x.Search in Google Scholar

Zohir, A.E. and Gomaa, A.G. (2013). Heat transfer enhancement through sudden expansion pipe airflow using swirl generator with different angles. Exp. Therm. Fluid Sci. 45: 146–154, https://doi.org/10.1016/j.expthermflusci.2012.10.018.Search in Google Scholar