Non-Thermal Plasma Processing for VOCs Decomposition and NOx Removal in Flue Gas
-
Tetsuji Oda
Abstract
Decomposition performance of non-thermal plasma for volatile organic compounds (VOCs) such as chlorofluorocarbon (CFC), chlorohydrocarbon and other typical organic materials, were studied experimentally. DeNOx process of the non-thermal plasma for the flue gas was also tested. Frequency dependence of plasma exciting voltage including pulse and AC, humidity effects (OH radical effects) on the plasma processing and reactor geometry effects were studied to understand the decomposition mechanism and optimize the power efficiency of the processing. 500 Hz or 1kHz excitation is found to be the upper limit to realize good decomposition efficiency of VOCs or good reduction of NOx. Higher frequency causes other loss by heating residual ions. Pulse excitation was much better than the AC excitation, especially at the high decomposition rate of the VOCs.
© 2017 by Walter de Gruyter Berlin/Boston
Artikel in diesem Heft
- Masthead
- Contents
- Preface
- Editorial
- Research Articles
- An Industrial-Scale Experiment of Pulse Corona Process for Removing SO2 and NOx from Combustion Flue Gas
- Ozone and the Other Gaseous By-products Generated from Dry Air by the Trench Type Barrier Discharge Plasma Reactor
- Purification of Diesel Exhaust Gas Using Reducing Catalysers
- Reduction of NO2 in N2 by Non-Thermal Plasmas
- The Effect of Ammonia Injection Rate and Discharge Power on the Reduction of NOx from a Combustion Flue Gas by Superimposing Barrier Discharge Reactors
- Removal of NOx from Dry Air by a Pulsed Corona Discharge with Magnetic Field
- Comparison of Pulsed Corona and Electron Beam Processing of Hazardous Air Pollutants
- Effect of Gas Temperature on Pulsed Corona Discharge Processing of Acetone, Benzene and Ethylene
- Non-Thermal Plasma Techniques for the Reduction of Volatile Organic Compounds in Air Streams: A Critical Review
- Decomposition of Carbon Tetrachloride by a Packed Bed Plasma Reactor
- Non-Thermal Plasma Processing for VOCs Decomposition and NOx Removal in Flue Gas
- Removal of Xylene, Trichloroethylene and Their Mixtures from Air Stream by a Pulsed Corona Discharge Induced Plasma Reactor
- Barrier Discharge Optimization for Nitric Oxide Destruction
Artikel in diesem Heft
- Masthead
- Contents
- Preface
- Editorial
- Research Articles
- An Industrial-Scale Experiment of Pulse Corona Process for Removing SO2 and NOx from Combustion Flue Gas
- Ozone and the Other Gaseous By-products Generated from Dry Air by the Trench Type Barrier Discharge Plasma Reactor
- Purification of Diesel Exhaust Gas Using Reducing Catalysers
- Reduction of NO2 in N2 by Non-Thermal Plasmas
- The Effect of Ammonia Injection Rate and Discharge Power on the Reduction of NOx from a Combustion Flue Gas by Superimposing Barrier Discharge Reactors
- Removal of NOx from Dry Air by a Pulsed Corona Discharge with Magnetic Field
- Comparison of Pulsed Corona and Electron Beam Processing of Hazardous Air Pollutants
- Effect of Gas Temperature on Pulsed Corona Discharge Processing of Acetone, Benzene and Ethylene
- Non-Thermal Plasma Techniques for the Reduction of Volatile Organic Compounds in Air Streams: A Critical Review
- Decomposition of Carbon Tetrachloride by a Packed Bed Plasma Reactor
- Non-Thermal Plasma Processing for VOCs Decomposition and NOx Removal in Flue Gas
- Removal of Xylene, Trichloroethylene and Their Mixtures from Air Stream by a Pulsed Corona Discharge Induced Plasma Reactor
- Barrier Discharge Optimization for Nitric Oxide Destruction
