Reactive compatibilization of polypropylene grafted with maleic anhydride and styrene, prepared by a mechanochemical method, for a blend system of biodegradable poly(propylene carbonate)/polypropylene spunbond nonwoven slice

References

Azizli, M.J., Barghamadi, M., Rezaeeparto, K., and Parham, S. (2022). Improvement of mechanical, morphological and thermal properties on PP-enriched graphene oxide/PP-g-MA/EPDM blend compatibilized: PP-g-MA compatibilizer and graphene oxide nanofiller role. J. Polym. Res. 29: 322, https://doi.org/10.1007/s10965-022-03182-4.Suche in Google Scholar

Borrelle, S.B., Ringma, J., Law, K.L., Monnahan, C.C., Lebreton, L., McGivern, A., Murphy, E., Jambeck, J., Leonard, G.H., Hilleary, M.A., et al.. (2020). Predicted growth in plastic waste exceeds efforts to mitigate plastic pollution. Science 369: 1515–1518, https://doi.org/10.1126/science.aba3656.Suche in Google Scholar PubMed

Carrasco, F., Santana, O.O., Cailloux, J., Sánchez-Soto, M., and Maspoch, M.L. (2018). Poly(lactic acid) and acrylonitrile-butadiene-styrene blends: influence of adding ABS-g-MAH compatibilizer on the kinetics of the thermal degradation. Polymer. Test. 67: 468–476, https://doi.org/10.1016/j.polymertesting.2018.03.010.Suche in Google Scholar

Enriquez, E. (2016). Sustainable carbon dioxide based polymer blends and natural fiber composites. University of Guelph, Guelph, Ontario.Suche in Google Scholar

Fang, Z.-q., Tang, L.-x., and Liu, C.-h. (2003). Studies and applications of the solid-phase grafting of MAH and St onto PP. Polym. Mater. Sci. Eng. 19: 83–85.Suche in Google Scholar

Gao, L., Huang, M., Wu, Q., Wan, X., Chen, X., Wei, X., Yang, W., Deng, R., Wang, L., and Feng, J. (2019). Enhanced poly(propylene carbonate) with thermoplastic networks: a cross-linking role of maleic anhydride oligomer in CO2/PO copolymerization. Polymers 11: 1467, https://doi.org/10.3390/polym11091467.Suche in Google Scholar PubMed PubMed Central

Lee, J., Kim, J.K., and Son, Y. (2012). Evaluation of polypropylene grafted with maleic anhydride and styrene as a compatibilizer for polypropylene/clay nanocomposites. Polym. Bull. 68: 541–551, https://doi.org/10.1007/s00289-011-0642-5.Suche in Google Scholar

Li, C., Liu, L., Jiang, X., Zhang, E., Mancini, J.D., Parkhitko, A., Morrison, T.A., Silverman, E.K., Henske, E.P., and Yu, J.J. (2013). The application of infrared spectroscopy in the analysis of polypropylene isotacticity. Guangzhou Chem. Ind. 41: 135–137, https://doi.org/10.1165/rcmb.2012-0476OC.Suche in Google Scholar PubMed PubMed Central

Li, S., Xiao, M., Wei, D., Xiao, H., Hu, F., and Zheng, A. (2009). The melt grafting preparation and rheological characterization of long chain branching polypropylene. Polymer 50: 6121–6128, https://doi.org/10.1016/j.polymer.2009.10.006.Suche in Google Scholar

Li, X., Meng, L., Zhang, Y., Qin, Z., Meng, L., Li, C., and Liu, M. (2022). Research and application of polypropylene carbonate composite materials: a review. Polymers 14: 2159, https://doi.org/10.3390/polym14112159.Suche in Google Scholar PubMed PubMed Central

Li, X., Yang, Q., Zhang, K., Pan, L., Feng, Y., Jia, Y., and Xu, N. (2022). Property improvement and compatibilization mechanism of biodegradable polylactic acid/maleic anhydride-based/polypropylene spunbonded nonwoven slices. J. Clean. Prod. 375: 134097, https://doi.org/10.1016/j.jclepro.2022.134097.Suche in Google Scholar

Luinstra, G.A. (2008). Poly(Propylene carbonate), old copolymers of propylene oxide and carbon dioxide with new interests: catalysis and material properties. Polym. Rev. 48: 192–219, https://doi.org/10.1080/15583720701834240.Suche in Google Scholar

Mahmoudi Alemi, F., Mousavi Dehghani, S.A., Rashidi, A., Hosseinpour, N., and Mohammadi, S. (2021). Synthesize of MWCNT-Fe2O3 nanocomposite for controlling formation and growth of asphaltene particles in unstable crude oil. Colloid. Surface. A. 615: 126295, https://doi.org/10.1016/j.colsurfa.2021.126295.Suche in Google Scholar

Malakhov, S.N., Dmitryakov, P.V., Pichkur, E.B., and Chvalun, S.N. (2020). Nonwoven materials produced by melt electrospinning of polypropylene filled with calcium carbonate. Polymers 12: 2981, https://doi.org/10.3390/polym12122981.Suche in Google Scholar PubMed PubMed Central

Malkapuram, R., Kumar, V., and Negi, Y.S. (2009). Recent development in natural fiber reinforced polypropylene composites. J. Reinf. Plast. Comp. 28: 1169–1189, https://doi.org/10.1177/0731684407087759.Suche in Google Scholar

Muljana, H., Arends, S., Remerie, K., Boven, G., Picchioni, F., and Bose, R.K. (2022). Cross-linking of polypropylene via the Diels–Alder reaction. Polymers 14: 1176.10.3390/polym14061176Suche in Google Scholar PubMed PubMed Central

Muthuraj, R. and Mekonnen, T. (2018). Carbon dioxide-derived poly(propylene carbonate) as a matrix for composites and nanocomposites: performances and applications. Macromol. Mater. Eng. 303: 1800366, https://doi.org/10.1002/mame.201800366.Suche in Google Scholar

Pan, L.-s., Tian, Z., Zhang, Z.-q., Yang, Q., Chen, Z., Chen, L.-m., Pang, S.-j., Xu, N., and Lin, Q. (2014). Performance of biodegradable spun-bonded non-woven fabric slices of poly (propylene carbonate)/compatibilizer/polypropylene. Acta Polym. Sin. 7: 928–937.Suche in Google Scholar

Parameswaranpillai, J., Joseph, G., Jose, S., and Hameed, N. (2015). Phase morphology, thermomechanical, and crystallization behavior of uncompatibilized and PP-g-MAH compatibilized polypropylene/polystyrene blends. J. Appl. Polym. Sci. 132: 42100, https://doi.org/10.1002/app.42100.Suche in Google Scholar

Pastor-García, M.T., Suárez, I., Expósito, M.T., Coto, B., and García-Muñoz, R.A. (2018). Influence on properties and phase structure of single gas-phase reactor made impact polypropylene copolymers. Eur. Polym. J. 106: 156–168, https://doi.org/10.1016/j.eurpolymj.2018.07.015.Suche in Google Scholar

Rahimi, A. and García, J.M. (2017). Chemical recycling of waste plastics for new materials production. Nat. Rev. Chem. 1: 0046, https://doi.org/10.1038/s41570-017-0046.Suche in Google Scholar

Sperling, L.H. and Hu, R. (2014). Interpenetrating polymer networks. In: Utracki, L.A., and Wilkie, C.A. (Eds.), Polymer blends handbook. Dordrecht: Springer Netherlands, pp. 677–724.10.1007/978-94-007-6064-6_8Suche in Google Scholar

Supri, A.G., Ismail, H., and Shuhadah, S. (2010). Effect of polyethylene-grafted maleic anhydride (PE-g-MAH) on properties of low density polyethylene/eggshell powder (LDPE/ESP) composites. Polym.-Plast. Technol. 49: 347–353, https://doi.org/10.1080/03602550903414035.Suche in Google Scholar

Tan, S.J., Supri, A.G., and Teh, P.L. (2013). Effect of PE-g-MAH as compatibilizer on properties of LDPE/NR/WHF composites. Appl. Mech. Mater. 284–287: 87–93, https://doi.org/10.4028/www.scientific.net/amm.284-287.87.Suche in Google Scholar

Tariq, A., Afzal, A., Rashid, I.A., and Shakir, M.F. (2020). Study of thermal, morphological, barrier and viscoelastic properties of PP grafted with maleic anhydride (PP-g-MAH) and PET blends. J. Polym. Res. 27: 309, https://doi.org/10.1007/s10965-020-02291-2.Suche in Google Scholar

Tian, Z., Pan, L.-s., Gao, P.-b., Xu, N., Pang, S.-j., Lin, Q., Chen, L.-m., and Chen, Z. (2013). Effect of some additives on the performance of biodegradable non-woven fabric slices of poly (propylene carbonate)/polypropylene blends. Acta Polym. Sin. 4: 482–490.10.3724/SP.J.1105.2013.12228Suche in Google Scholar

Tian, Z., Pan, L., and Pan, Q. (2019). Polypropylene grafted with maleic anhydride and styrene as a compatibilizer for biodegradable poly(propylene carbonate)/polypropylene. J. Eng. Fiber. Fabr. 14: 1–9, https://doi.org/10.1177/1558925019849714.Suche in Google Scholar

Vollmer, I., Jenks, M.J.F., Mayorga González, R., Meirer, F., and Weckhuysen, B.M. (2021). Plastic waste conversion over a refinery waste catalyst. Angew. Chem. Int. Edit. 60: 16101–16108, https://doi.org/10.1002/ange.202104110.Suche in Google Scholar

Wang, D., Li, Y., Xie, X.-M., and Guo, B.-H. (2011). Compatibilization and morphology development of immiscible ternary polymer blends. Polymer 52: 191–200, https://doi.org/10.1016/j.polymer.2010.11.019.Suche in Google Scholar

Wang, G., Han, Y., Guo, Y., Wang, S., Sun, J., Zhou, H., and Zhao, T. (2019). Phthalonitrile-terminated silicon-containing oligomers: synthesis, polymerization, and properties. Ind. Eng. Chem. Res. 58: 9921–9930, https://doi.org/10.1021/acs.iecr.9b01642.Suche in Google Scholar

Wei, P., Lou, H., Xu, X., Xu, W., Yang, H., Zhang, W., and Zhang, Y. (2021). Preparation of PP non-woven fabric with good heavy metal adsorption performance via plasma modification and graft polymerization. Appl. Surf. Sci. 539: 148195, https://doi.org/10.1016/j.apsusc.2020.148195.Suche in Google Scholar

Wu, M.-H., Wang, C.-C., and Chen, C.-Y. (2020). Chemical modification of atactic polypropylene and its applications as a crystallinity additive and compatibility agent. Polymer 194: 122386, https://doi.org/10.1016/j.polymer.2020.122386.Suche in Google Scholar

Xu, J., Ban, H., Ye, C., Yang, J., and Hao, Y. (2010). The long-term stress aging on the structure and properties of nylon 6. Polym. Mater. Sci. Eng. 26: 79–85.Suche in Google Scholar

Xu, J.J., Guo, M.L., Chen, Q.G., Lian, Z.Y., Wei, W.J., Luo, Z.W., Xie, G., Chen, H.N., and Dong, K. (2017). Surface grafting of styrene on polypropylene fibers by argon plasma and its adsorption-regeneration of BTX. IOP Conf. Ser.: Earth Environ. Sci. 82: 012077, https://doi.org/10.1088/1755-1315/82/1/012077.Suche in Google Scholar

Yilu, Z., Zhifang, G., Liming, Z., Lisha, P., Zheng, T., Sujuan, P., Nai, X., and Qiang, L. (2015). Mechanochemistry: a novel approach to graft polypropylene with dual monomers (PP-g-(MAH-co-St)). Polym. Bull. 72: 1949–1960, https://doi.org/10.1007/s00289-015-1382-8.Suche in Google Scholar

Zheng, Y., Zhao, S., Zeng, A., and Guo, Y. (2012). The application of response surface methodology on the synthesis of grafted polypropylene through the solvothermal route. Adv. Polym. Tech. 31: 109–117, https://doi.org/10.1002/adv.20242.Suche in Google Scholar