Effect of Introducing Long Chain Branching on Fiber Diameter and Fiber Diameter Distribution in Melt Blowing Process of Polypropylene

References

Bagley, E. B., "End Corrections in the Capillary Flow of Polyethylene", Polym. Eng. Sci., 28, 624–627 (1957), DOI:10.1063/1.172281410.1063/1.1722814Suche in Google Scholar

Chen, T., Huang, X., "Study on the Flow Field of the Air Jet from Dual Slot Die in the Melt Blowing Process", Polym. Eng. Sci., 41, 971–976 (2001), DOI:10.1002/pen.1079710.1002/pen.10797Suche in Google Scholar

Chhabra, R., Shambaugh, R. L., "Experimental Measurements of Fiber Threadline Vibrations in the Melt-Blowing Process", Ind. Eng. Chem. Res., 35, 4366–4374 (1996), DOI:10.1021/ie960309λ10.1021/ie960309λSuche in Google Scholar

Cogswell, F. N., "Measuring the Extensional Rheology of Polymer Melts", Trans Soc. Rheol., 16, 383–403 (1972), DOI:10.1122/1.54925710.1122/1.549257Suche in Google Scholar

Drabek, J., Zatloukal, M., "Influence of Long Chain Branching on Fiber Diameter Distribution for Polypropylene Nonwovens Produced by Melt Blown Process", J. Rheol., 63, 519–532 (2019), DOI:10.1122/1.504858510.1122/1.5048585Suche in Google Scholar

Drabek, J., Zatloukal, M., "Meltblown Technology for Production of Polymeric Microfibers/Nanofibers: A Review", Phys. Fluids., 31 (2019), DOI:10.1063/1.511633610.1063/1.5116336Suche in Google Scholar

Ellison, C. J., Phatak, A., Giles, D. W., Macosko, C. W. and Bates, F. S., "Melt Blown Nanofibers: Fiber Diameter Distributions and Onset of Fiber Breakup", Polymer, 48, 3306–3316 (2007), DOI:10.1016/j.polymer.2007.04.00510.1016/j.polymer.2007.04.005Suche in Google Scholar

Hao, X., Zeng, Y., "A Review on the Studies of Air Flow Field and Fiber Formation Process during Melt Blowing", Ind. Eng. Chem. Res., 58, 11624–11637 (2019), DOI:10.1021/acs.iecr.9b0169410.1021/acs.iecr.9b01694Suche in Google Scholar

Harpham, A. S., Shambaugh, R. L., "Flow Field of Practical Dual Rectangular Jets", Ind. Eng. Chem. Res., 35, 3776–3781 (1996), DOI:10.1021/ie960309λ10.1021/ie960309λSuche in Google Scholar

Kamin, Z., Sarbatly, R., Krishnaiah, D., Tanioka, A. and Takahashi, M., "Melt Blowing Process Conditions for Nanofibers of Polymers for Oil-Water Separation in Marine Oil Spills Clean-up Applications: A Short Review", J. Mech. Eng. Res. Dev., 42, 205–210 (2019), DOI:10.26480/jmerd.05.2019.205.21010.26480/jmerd.05.2019.205.210Suche in Google Scholar

Lawrence, K. D., Lucas, R. T. and Young, J. A.: An Improved Device for the Formation of Superfine, Thermoplastic Fibers, No. NRL-5265, Naval Research LAB, Washington DC (1959), DOI:10.21236/AD021336710.21236/AD0213367Suche in Google Scholar

Lenk, R. S., "Chapter 7 The Hagen-Poiseuille Equation and the Rabinowitsch Correction. The Pressure Drop in Tapered Channels", in Polymer Rheology, Springer, Dordrecht, p. 75–85 (1978), DOI:10.1007/978-94-010-9666-9_710.1007/978-94-010-9666-9_7Suche in Google Scholar

McCulloch, J. G., "The History of the Development of Melt Blowing Technology", Int. Nonwovens J., os-°, 1 (1999), DOI:10.1177/1558925099os-80012310.1177/1558925099os-800123Suche in Google Scholar

Padmanabhan, M., Macosko, C. W., "Extensional Viscosity from Entrance Pressure Drop Measurements", Rheol. Acta., 36, 144–151 (1997), DOI:10.1007/s00397005003110.1007/s003970050031Suche in Google Scholar

Rao, R. S., Shambaugh, R. L., "Vibration and Stability in the Melt Blowing Process", Ind. Eng. Chem. Res., 32, 3100–3111 (1993), DOI:10.1021/ie00024a02010.1021/ie00024a020Suche in Google Scholar

Ruamsuk, R., Takarada, W. and Kikutani, T., "Fine Filament Formation Behavior of Polymethylpentene and Polypropylene near Spinneret in Melt Blowing Process", Int. Polym. Proc., 31, 217–223 (2016), DOI:10.3139/217.316310.3139/217.3163Suche in Google Scholar

Sedlacek, T., Zatloukal, M., Filip, P., Boldizar, A. and Saha, P., "On the Effect of Pressure on the Shear and Elongational Viscosities of Polymer Melts", Polym. Eng. Sci., 44, 1328–1337 (2004), DOI:10.1002/pen.2012810.1002/pen.20128Suche in Google Scholar

Tan, D. H., Zhou, C., Ellison, C. J., Kumar, S., Macosko, C. W. and Bates, F. S., "Meltblown Fibers: Influence of Viscosity and Elasticity on Diameter Distribution", J. Non-Newtonian Fluid Mech., 165, 892–900 (2010), DOI:10.1016/j.jnnfm.2010.04.01210.1016/j.jnnfm.2010.04.012Suche in Google Scholar

Tate, B. D., Shambaugh, R. L., "Modified Dual Rectangular Jets for Fiber Production", Ind. Eng. Chem. Res., 37, 3772–3779 (1998), DOI:10.1021/ie980219a10.1021/ie980219aSuche in Google Scholar

Tate, B. D., Shambaugh, R. L., "Temperature Fields below Melt-Blowing Dies of Various Geometries", Ind. Eng. Chem. Res., 43, 5405–5410 (2004), DOI:10.1021/ie040066t10.1021/ie040066tSuche in Google Scholar