Effect of Introducing Long Chain Branching on Fiber Diameter and Fiber Diameter Distribution in Melt Blowing Process of Polypropylene

References

Bagley, E. B., "End Corrections in the Capillary Flow of Polyethylene", Polym. Eng. Sci., 28, 624–627 (1957), DOI:10.1063/1.172281410.1063/1.1722814Search in Google Scholar

Chen, T., Huang, X., "Study on the Flow Field of the Air Jet from Dual Slot Die in the Melt Blowing Process", Polym. Eng. Sci., 41, 971–976 (2001), DOI:10.1002/pen.1079710.1002/pen.10797Search in Google Scholar

Chhabra, R., Shambaugh, R. L., "Experimental Measurements of Fiber Threadline Vibrations in the Melt-Blowing Process", Ind. Eng. Chem. Res., 35, 4366–4374 (1996), DOI:10.1021/ie960309λ10.1021/ie960309λSearch in Google Scholar

Cogswell, F. N., "Measuring the Extensional Rheology of Polymer Melts", Trans Soc. Rheol., 16, 383–403 (1972), DOI:10.1122/1.54925710.1122/1.549257Search in Google Scholar

Drabek, J., Zatloukal, M., "Influence of Long Chain Branching on Fiber Diameter Distribution for Polypropylene Nonwovens Produced by Melt Blown Process", J. Rheol., 63, 519–532 (2019), DOI:10.1122/1.504858510.1122/1.5048585Search in Google Scholar

Drabek, J., Zatloukal, M., "Meltblown Technology for Production of Polymeric Microfibers/Nanofibers: A Review", Phys. Fluids., 31 (2019), DOI:10.1063/1.511633610.1063/1.5116336Search in Google Scholar

Ellison, C. J., Phatak, A., Giles, D. W., Macosko, C. W. and Bates, F. S., "Melt Blown Nanofibers: Fiber Diameter Distributions and Onset of Fiber Breakup", Polymer, 48, 3306–3316 (2007), DOI:10.1016/j.polymer.2007.04.00510.1016/j.polymer.2007.04.005Search in Google Scholar

Hao, X., Zeng, Y., "A Review on the Studies of Air Flow Field and Fiber Formation Process during Melt Blowing", Ind. Eng. Chem. Res., 58, 11624–11637 (2019), DOI:10.1021/acs.iecr.9b0169410.1021/acs.iecr.9b01694Search in Google Scholar

Harpham, A. S., Shambaugh, R. L., "Flow Field of Practical Dual Rectangular Jets", Ind. Eng. Chem. Res., 35, 3776–3781 (1996), DOI:10.1021/ie960309λ10.1021/ie960309λSearch in Google Scholar

Kamin, Z., Sarbatly, R., Krishnaiah, D., Tanioka, A. and Takahashi, M., "Melt Blowing Process Conditions for Nanofibers of Polymers for Oil-Water Separation in Marine Oil Spills Clean-up Applications: A Short Review", J. Mech. Eng. Res. Dev., 42, 205–210 (2019), DOI:10.26480/jmerd.05.2019.205.21010.26480/jmerd.05.2019.205.210Search in Google Scholar

Lawrence, K. D., Lucas, R. T. and Young, J. A.: An Improved Device for the Formation of Superfine, Thermoplastic Fibers, No. NRL-5265, Naval Research LAB, Washington DC (1959), DOI:10.21236/AD021336710.21236/AD0213367Search in Google Scholar

Lenk, R. S., "Chapter 7 The Hagen-Poiseuille Equation and the Rabinowitsch Correction. The Pressure Drop in Tapered Channels", in Polymer Rheology, Springer, Dordrecht, p. 75–85 (1978), DOI:10.1007/978-94-010-9666-9_710.1007/978-94-010-9666-9_7Search in Google Scholar

McCulloch, J. G., "The History of the Development of Melt Blowing Technology", Int. Nonwovens J., os-°, 1 (1999), DOI:10.1177/1558925099os-80012310.1177/1558925099os-800123Search in Google Scholar

Padmanabhan, M., Macosko, C. W., "Extensional Viscosity from Entrance Pressure Drop Measurements", Rheol. Acta., 36, 144–151 (1997), DOI:10.1007/s00397005003110.1007/s003970050031Search in Google Scholar

Rao, R. S., Shambaugh, R. L., "Vibration and Stability in the Melt Blowing Process", Ind. Eng. Chem. Res., 32, 3100–3111 (1993), DOI:10.1021/ie00024a02010.1021/ie00024a020Search in Google Scholar

Ruamsuk, R., Takarada, W. and Kikutani, T., "Fine Filament Formation Behavior of Polymethylpentene and Polypropylene near Spinneret in Melt Blowing Process", Int. Polym. Proc., 31, 217–223 (2016), DOI:10.3139/217.316310.3139/217.3163Search in Google Scholar

Sedlacek, T., Zatloukal, M., Filip, P., Boldizar, A. and Saha, P., "On the Effect of Pressure on the Shear and Elongational Viscosities of Polymer Melts", Polym. Eng. Sci., 44, 1328–1337 (2004), DOI:10.1002/pen.2012810.1002/pen.20128Search in Google Scholar

Tan, D. H., Zhou, C., Ellison, C. J., Kumar, S., Macosko, C. W. and Bates, F. S., "Meltblown Fibers: Influence of Viscosity and Elasticity on Diameter Distribution", J. Non-Newtonian Fluid Mech., 165, 892–900 (2010), DOI:10.1016/j.jnnfm.2010.04.01210.1016/j.jnnfm.2010.04.012Search in Google Scholar

Tate, B. D., Shambaugh, R. L., "Modified Dual Rectangular Jets for Fiber Production", Ind. Eng. Chem. Res., 37, 3772–3779 (1998), DOI:10.1021/ie980219a10.1021/ie980219aSearch in Google Scholar

Tate, B. D., Shambaugh, R. L., "Temperature Fields below Melt-Blowing Dies of Various Geometries", Ind. Eng. Chem. Res., 43, 5405–5410 (2004), DOI:10.1021/ie040066t10.1021/ie040066tSearch in Google Scholar