Article
Licensed
Unlicensed
Requires Authentication
PPS News
Published/Copyright:
September 15, 2021
Published Online: 2021-09-15
Published in Print: 2021-09-27
© 2021 Walter de Gruyter GmbH, Berlin/Boston, Germany
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Contents
- Regular Contributed Articles
- Fiber Length Distribution in Twin-Screw Extrusion of Fiber-Reinforced Polymer Composites: A Comparison between Shear and Extensional Mixing
- The Effect of Nanosilicates on the Performance of Polyethylene Terephthalate Films Prepared by Twin-Screw Extrusion
- Synergistic Effect between Modified Graphene Oxide and Ammonium Polyphosphate on Combustion Performance, Thermal Stability and Mechanical Properties of Polylactic Acid
- Basic Study of Extensional Flow Mixing for the Dispersion of Carbon Nanotubes in Polypropylene by Using Capillary Extrusion
- Pulsed IR Heating of Thermoplastic Sheets for Thermoforming Applications
- Novel Design and Comparison of Structural and Modal Analyses of Auxetic Geometry versus Honeycomb Geometry
- Effect of Introducing Long Chain Branching on Fiber Diameter and Fiber Diameter Distribution in Melt Blowing Process of Polypropylene
- Study on the Relationship between the Bonding Surface and Mechanical Properties of PLA/Epoxy Laminated Composites
- A Study on Thermal and Electrical Conductivities of Ethylene-Butene Copolymer Composites with Carbon Fibers
- Model Approach for Displaying Dynamic Filament Displacement during Impregnation of Continuous Fibres Based on the Theory of Similarity – Theory and Modelling
- Using Symbolic Regression Models to Predict the Pressure Loss of Non-Newtonian Polymer-Melt Flows through Melt-Filtration Systems with Woven Screens
- Preparation and Photo-Oxidation Aging Behavior of Oriented Polylactic Acid
- Numerical Simulation and Process Optimization of a 3D Thin-Walled Polymeric Part Using Injection Compression Molding
- PPS News
- Seikei-Kakou abstracts
- PPS Membership application
Articles in the same Issue
- Contents
- Regular Contributed Articles
- Fiber Length Distribution in Twin-Screw Extrusion of Fiber-Reinforced Polymer Composites: A Comparison between Shear and Extensional Mixing
- The Effect of Nanosilicates on the Performance of Polyethylene Terephthalate Films Prepared by Twin-Screw Extrusion
- Synergistic Effect between Modified Graphene Oxide and Ammonium Polyphosphate on Combustion Performance, Thermal Stability and Mechanical Properties of Polylactic Acid
- Basic Study of Extensional Flow Mixing for the Dispersion of Carbon Nanotubes in Polypropylene by Using Capillary Extrusion
- Pulsed IR Heating of Thermoplastic Sheets for Thermoforming Applications
- Novel Design and Comparison of Structural and Modal Analyses of Auxetic Geometry versus Honeycomb Geometry
- Effect of Introducing Long Chain Branching on Fiber Diameter and Fiber Diameter Distribution in Melt Blowing Process of Polypropylene
- Study on the Relationship between the Bonding Surface and Mechanical Properties of PLA/Epoxy Laminated Composites
- A Study on Thermal and Electrical Conductivities of Ethylene-Butene Copolymer Composites with Carbon Fibers
- Model Approach for Displaying Dynamic Filament Displacement during Impregnation of Continuous Fibres Based on the Theory of Similarity – Theory and Modelling
- Using Symbolic Regression Models to Predict the Pressure Loss of Non-Newtonian Polymer-Melt Flows through Melt-Filtration Systems with Woven Screens
- Preparation and Photo-Oxidation Aging Behavior of Oriented Polylactic Acid
- Numerical Simulation and Process Optimization of a 3D Thin-Walled Polymeric Part Using Injection Compression Molding
- PPS News
- Seikei-Kakou abstracts
- PPS Membership application
