Home Physical Sciences PPS News
Article
Licensed
Unlicensed Requires Authentication

PPS News

Published/Copyright: February 28, 2022
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 22 Issue 2

Published Online: 2022-02-28
Published in Print: 2022-02-28

© 2007 Walter de Gruyter GmbH, Berlin/Boston, Germany

Articles in the same Issue

  1. Contents
  2. Regular Contributed Articles
  3. Functionalization of Low Density Polyethylene with Ricinol-2-oxazoline Methyl Maleate in a Twin-screw Extruder
  4. Modelling of Phase Transitions and Residual Thermal Stress of CTBN Rubber Modified Epoxy Resins during a Pultrusion Process
  5. Real-time Diagnosis of Micro Powder Injection Molding Using Integrated Ultrasonic Sensors
  6. Rheological Behavior of HEUR Mixtures in Aqueous Media
  7. Spinnability and Dyeability for Copolymer/Nano-SiO2 Fiber of Glycol and 1,2-Propanediol with PTA
  8. Development of a Novel Transcription Molding Process to Fabricate Sophisticated Polymer Products with Precise Microstructure and High Transparency Applicable to Display Devices and Bio-chips
  9. Effect of Aspect Ratio of Whisker on the Fibrillation of Liquid Crystalline Polymer in Polysulfone Matrix
  10. Gas Assisted Injection Molding of an Industrial Part: 3D Simulation Provides Virtual Molding Trials
  11. Analysis of Film Blowing with Flow-enhanced Crystallization
  12. Analysis of Film Blowing with Flow-enhanced Crystallization
  13. A Composite Model for Melting, Pressure and Fill Factor Profiles in a Metered Fed Closely Intermeshing Counter-rotating Twin Screw Extruder
  14. Surface Defects of TPO Injected Foam Parts for Automotive Applications
  15. PPS News
  16. PPS News
  17. Seikei-Kakou Abstracts
  18. Seikei-Kakou Abstracts
https://doi.org/10.1515/ipp-2007-0013

Articles in the same Issue

  1. Contents
  2. Regular Contributed Articles
  3. Functionalization of Low Density Polyethylene with Ricinol-2-oxazoline Methyl Maleate in a Twin-screw Extruder
  4. Modelling of Phase Transitions and Residual Thermal Stress of CTBN Rubber Modified Epoxy Resins during a Pultrusion Process
  5. Real-time Diagnosis of Micro Powder Injection Molding Using Integrated Ultrasonic Sensors
  6. Rheological Behavior of HEUR Mixtures in Aqueous Media
  7. Spinnability and Dyeability for Copolymer/Nano-SiO2 Fiber of Glycol and 1,2-Propanediol with PTA
  8. Development of a Novel Transcription Molding Process to Fabricate Sophisticated Polymer Products with Precise Microstructure and High Transparency Applicable to Display Devices and Bio-chips
  9. Effect of Aspect Ratio of Whisker on the Fibrillation of Liquid Crystalline Polymer in Polysulfone Matrix
  10. Gas Assisted Injection Molding of an Industrial Part: 3D Simulation Provides Virtual Molding Trials
  11. Analysis of Film Blowing with Flow-enhanced Crystallization
  12. Analysis of Film Blowing with Flow-enhanced Crystallization
  13. A Composite Model for Melting, Pressure and Fill Factor Profiles in a Metered Fed Closely Intermeshing Counter-rotating Twin Screw Extruder
  14. Surface Defects of TPO Injected Foam Parts for Automotive Applications
  15. PPS News
  16. PPS News
  17. Seikei-Kakou Abstracts
  18. Seikei-Kakou Abstracts
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2026 De Gruyter Brill
Downloaded on 21.2.2026 from https://www.degruyterbrill.com/document/doi/10.1515/ipp-2007-0013/html
Scroll to top button