Home Liquid–liquid interfacial tension in themonotectic alloy (Al34.5Bi65.5)95Si5 (wt.%)
Article
Licensed
Unlicensed Requires Authentication

Liquid–liquid interfacial tension in themonotectic alloy (Al34.5Bi65.5)95Si5 (wt.%)

  • Ivan Kaban and Walter Hoyer EMAIL logo
Published/Copyright: January 19, 2022
Become an author with De Gruyter Brill

Abstract

The liquid – liquid interfacial tension and the density difference of the coexisting phases in the immiscible alloy (Al34.5Bi65.5)95Si5 (wt.%) have been measured between 873 and 1238 K. The interfacial tension equals (73.0 ± 3.6) mN/m at 873 K and it decreases with increasing temperature proportionally to (1 – T/TC)δ. The critical-point exponent δ = 1.38, and the critical temperature TC = 1410 K were determined from the experimental data.


Prof. Dr. Walter Hoyer TU Chemnitz Institut für Physik Reichenhainer Straße 70, D-09107 Chemnitz, Germany Tel.: +49 371 5 31 82 08 Fax: +49 371 5 31 35 55

Dedicated to Prof. Dr. Ferdinand Sommer on the occasion of his 65th birthday


  1. Funding for this research was provided by the Deutsche Forschungsgemeinschaft under grant HO 1688/8-2 in the frame of the Schwerpunktprogramm 1120 „Phasenumwandlungen in merkomponentigen Schmelzen“.

References

[1] L. Ratke, S. Diefenbach: Mater. Sci. Eng. R 15 (1995) 263.10.1016/0927-796X(95)00180-8Search in Google Scholar

[2] L. Ratke, S. Drees, S. Diefenbach, B. Prinz, H. Ahlborn, in: L. Ratke, H.U. Walter, B. Feuerbacher (Eds.), Materials and Fluids Under Low Gravity, LNP 464, Springer-Verlag, Berlin (1996) 115.10.1007/BFb0102508Search in Google Scholar

[3] J.Z. Zhao, L. Ratke, B. Feuerbacher: Modelling Simul. Mater. Sci. Eng. 6 (1998) 123.10.1088/0965-0393/6/2/003Search in Google Scholar

[4] H. Tang, L.C. Wrobel, Z. Fan: Appl. Phys. A 81 (2005) 549.10.1007/s00339-004-2638-6Search in Google Scholar

[5] I. Kaban, W. Hoyer, M. Merkwitz: Z. Metallkd. 94 (2003) 831.10.3139/146.030831Search in Google Scholar

[6] Yu. Sun-Keun: Ph. D. Thesis, Universität Stuttgart (1994).Search in Google Scholar

[7] T.B. Massalski, J.L. Murray, K.H. Bennet, H. Baker: Binary Alloy Phase Diagrams, Vol. 1, American Society for Metals, Metals Park, OH (1986).Search in Google Scholar

[8] R.W. Olesinski, G.J. Abbaschian: Bull. Alloy Phase Diag. 6 (1985) 359.10.1007/BF02880522Search in Google Scholar

[9] M. Merkwitz: Ph. D. Thesis, Technische Universität Chemnitz (1997); http://www.tu-chemnitz.de/physik/ARCHIV/PROMOT/Search in Google Scholar

[10] M. Merkwitz, J. Weise, K. Thriemer, W. Hoyer: Z. Metallkd. 89 (1998) 247.Search in Google Scholar

[11] G. Lang: Aluminium 49 (1973) 231.10.1016/B978-0-08-017005-3.50027-XSearch in Google Scholar

[12] J.W. Cahn, J.E. Hilliard: J. Chem. Phys. 28 (1958) 258.10.1063/1.1744102Search in Google Scholar

[13] D. Chatain, N.J. Eustathopoulos: Chim. Phys. 81 (1984) 587.10.1051/jcp/1984810587Search in Google Scholar

[14] M. Merkwitz, W. Hoyer: Z. Metallkd. 90 (1999) 363.10.1023/A:1005243424665Search in Google Scholar

[15] J.D. Van der Waals: Z. phys. Chem. 13 (1894) 657.10.1515/zpch-1894-1338Search in Google Scholar

[16] J.W. Cahn, J.E. Hilliard: J. Chem. Phys. 28 (1958) 258.10.1063/1.1744102Search in Google Scholar

[17] S.S. Rowlinson, B. Widom: Molecular Theory of Capillarity, Clarendon Press, Oxford (1982).Search in Google Scholar

Received: 2005-10-10
Accepted: 2005-10-18
Published Online: 2022-01-19

© 2006 Carl Hanser Verlag, München

Articles in the same Issue

  1. Frontmatter
  2. Editorial
  3. Evolution of the mixed-mode character of solid-state phase transformations in metals involving solute partitioning
  4. Liquid–liquid interfacial tension in themonotectic alloy (Al34.5Bi65.5)95Si5 (wt.%)
  5. Influence of Sb additions on surface tension and density of Sn–Sb, Sn–Ag–Sb and Sn–Ag–Cu–Sb alloys: Experiment vs. modeling
  6. Liquid–liquid transition in elemental liquids investigated by sound velocity measurements: trends in the periodic table
  7. Bulk and surface properties of liquid Ga–Tl and Zn–Cd alloys
  8. Structure-induced order – disorder transformation in Cd – Na liquid alloys
  9. An indirect approach to measure glass transition temperature in metallic glasses
  10. Fragility, kinetic stability and phase separations in the undercooled state of bulk glass formers – a case study on metallic model systems
  11. Development of long-period ordered structures during crystallisation of amorphous Mg80Cu10Y10 and Mg83Ni9Y8
  12. Isothermal crystallization behavior of undercooled liquid Pd40Cu30Ni10P20 in terms of crystal growth, overall volume crystallization kinetics and their relation to the viscosity temperature dependence
  13. The magnesium-ytterbium system: A contribution to the thermodynamics of solid alloys
  14. Experimental investigation and thermodynamic modelling of the Mg–Al-rich region of the Mg–Al–Sr System
  15. Thermodynamic properties and phase relations of Zn-rich alloys in the system Pt–Zn
  16. Comparison of thermodynamic data of the ternary Cu–Sn–Zn system, measured with the EMF and with the calorimetric method
  17. Analysis of phase formation in Ni-rich alloys of the Ni–Ta–W system by calorimetry, DTA, SEM, and TEM
  18. Site preference, thermodynamic, and magnetic properties of the ternary Laves phase Ti(Fe1 – xAlx)2 with the crystal structure of the MgZn2-type
  19. Activity measurements on the Al-rich region of the Ni–Al system – A high temperature mass spectrometric study
  20. Metastable phases and nanocrystalline-forming ability (NFA) of melt-quenched Ni-rich (Zr, Hf)–Ni alloys
  21. Low temperature deposition with inductively coupled plasma
  22. Instructions for Authors
  23. Personal/Personelles
  24. Press/Presse
  25. Conferences/Konferenzen
  26. Frontmatter
  27. Editorial
  28. Editorial
  29. BBasic
  30. Evolution of the mixed-mode character of solid-state phase transformations in metals involving solute partitioning
  31. Liquid–liquid interfacial tension in themonotectic alloy (Al34.5Bi65.5)95Si5 (wt.%)
  32. Influence of Sb additions on surface tension and density of Sn–Sb, Sn–Ag–Sb and Sn–Ag–Cu–Sb alloys: Experiment vs. modeling
  33. Liquid–liquid transition in elemental liquids investigated by sound velocity measurements: trends in the periodic table
  34. Bulk and surface properties of liquid Ga–Tl and Zn–Cd alloys
  35. Structure-induced order – disorder transformation in Cd – Na liquid alloys
  36. An indirect approach to measure glass transition temperature in metallic glasses
  37. Fragility, kinetic stability and phase separations in the undercooled state of bulk glass formers – a case study on metallic model systems
  38. Development of long-period ordered structures during crystallisation of amorphous Mg80Cu10Y10 and Mg83Ni9Y8
  39. Isothermal crystallization behavior of undercooled liquid Pd40Cu30Ni10P20 in terms of crystal growth, overall volume crystallization kinetics and their relation to the viscosity temperature dependence
  40. The magnesium-ytterbium system: A contribution to the thermodynamics of solid alloys
  41. Experimental investigation and thermodynamic modelling of the Mg–Al-rich region of the Mg–Al–Sr System
  42. Thermodynamic properties and phase relations of Zn-rich alloys in the system Pt–Zn
  43. Comparison of thermodynamic data of the ternary Cu–Sn–Zn system, measured with the EMF and with the calorimetric method
  44. Analysis of phase formation in Ni-rich alloys of the Ni–Ta–W system by calorimetry, DTA, SEM, and TEM
  45. Site preference, thermodynamic, and magnetic properties of the ternary Laves phase Ti(Fe1 – xAlx)2 with the crystal structure of the MgZn2-type
  46. Activity measurements on the Al-rich region of the Ni–Al system – A high temperature mass spectrometric study
  47. Metastable phases and nanocrystalline-forming ability (NFA) of melt-quenched Ni-rich (Zr, Hf)–Ni alloys
  48. AApplied
  49. Low temperature deposition with inductively coupled plasma
  50. Notifications/Mitteilungen
  51. Instructions for Authors
  52. Personal/Personelles
  53. Press/Presse
  54. Conferences/Konferenzen
Downloaded on 14.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/ijmr-2006-0060/html
Scroll to top button