Startseite Diffraction by image processing and its application in materials science
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Diffraction by image processing and its application in materials science

  • Joachim Ohser EMAIL logo , Katja Schladitz , Karsten Koch und Michael Nöthe
Veröffentlicht/Copyright: 16. Februar 2022
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 96 Heft 7

Abstract

A spectral theory for constituents of macroscopically homogeneous random microstructures is developed and provided with a sound mathematical basis, where the spectrum obtained by Fourier methods corresponds to the angular intensity distribution of X-rays scattered by this constituent. It is shown that the fast Fourier transform applied to three-dimensional images of microstructures obtained by micro-tomography is a powerful tool of image processing. The applicability of this technique is demonstrated in the analysis of images of porous media.

Keywords: X-ray computer tomography (XCT); Image analysis; Fourier transform; Porous media; Sinter material
Joachim Ohser Department of Mathematics University of Applied Sciences Schöfferstraße 3, D-64295 Darmstadt, Germany Tel.: +49 6151 16 8655 Fax: +49 6151 16 8957

Dedicated to Professor Dr.-Ing. habil. Dr. h. c. Heinrich Oettel on the occasion of his 65th birthday

References

[1] D. Stoyan, W.S. Kendall, J. Mecke: Stochastic geometry and its applications, J. Wiley & Sons, Chichester, 2nd edition, 1995.Suche in Google Scholar

[2] R. Schneider, W. Weil: Stochastische Geometrie, Teubner-Verlag, Stuttgart, Leipzig, 2000.10.1007/978-3-322-80106-7Suche in Google Scholar

[3] A. Berke, G. Neite, W. Riehemann, E. Nembach: J. Appl. Phys.61(1987) 1263.10.1063/1.338103Suche in Google Scholar

[4] J. Frank,in: P.W. Hawkes (Ed.), Computer Processing of Electron Microscope Images, pp. 187–222. Springer, Berlin, 1980.10.1007/978-3-642-81381-8_5Suche in Google Scholar

[5] D. Manolakis, J. Proakis: Digital Signal Processing. Prentice-Hall, 3. edition, 1996.Suche in Google Scholar

[6] D. Marcotte: Computers & Geosciences 22 (1996) 1175.10.1016/S0098-3004(96)00026-XSuche in Google Scholar

[7] M. Frigo, S.G. Johnson: FFTW 2.1.3 (the fastest Fourier transform of the West). http://www.fftw.org/.Suche in Google Scholar

[8] P. Debye, H.R. Anderson, H. Brumberger: J. Appl. Phys., 28 (1957) 679.10.1063/1.1722830Suche in Google Scholar

[9] S. Torquato: Random Heterogeneous Materials:Microstructure and Macroscopic Properties, Springer, New York, 2002.10.1007/978-1-4757-6355-3Suche in Google Scholar

[10] J. Ohser, F. Mücklich: Statistical Analysis of Microstructures in Materials Science. Wiley, Chichester, 2000.Suche in Google Scholar

[11] K. Koch, J. Ohser, K. Schladitz: Adv. Appl. Prob., 35 (2003) 603.10.1239/aap/1059486820Suche in Google Scholar

[12] M. Bartlett: The spectral analysis of point processes, J. R. Statist. Soc. B 29 (1963) 264.10.1111/j.2517-6161.1963.tb00508.xSuche in Google Scholar

[13] M. Bartlett: Biometrika 51 (1964) 299.10.1093/biomet/51.3-4.299Suche in Google Scholar

[14] E. Renshaw, E. Ford: Applied Statistics 32 (1983) 51.10.2307/2348042Suche in Google Scholar

[15] M. Mugglestone, E. Renshaw: Computational Statistics & Data Analysis 21 (1996) 43.10.1016/0167-9473(95)00007-0Suche in Google Scholar

[16] D. Daley, D. Vere-Jones: An Introduction to the Theory of Point Processes, Springer, New York, 1988.Suche in Google Scholar

[17] B. Ripley: Spatial Statistics. Wiley, New York, 1981.10.1002/0471725218Suche in Google Scholar

[18] S. Böhm, L. Heinrich, V. Schmidt: Australian & New Zealand Journal of Statistics 46 (2004) 37.10.1111/j.1467-842X.2004.00310.xSuche in Google Scholar

[19] B. Dreseler, W. Schempp: Einführung in die harmonische Analyse. Teubner, Stuttgart, 1980.10.1007/978-3-322-99591-9Suche in Google Scholar

[20] E. Brigham: FFT. Schnelle Fourier-Transformation. Oldenburg, München–Wien, 6. edition, 1995.Suche in Google Scholar

[21] Fraunhofer ITWM, Department Models and Algorithms in Image Processing. MAVI. http://www.itwm.fhg.de/mab/projects/MAVI/, 2005.Suche in Google Scholar

[22] M. Godehardt, K. Schladitz, T. Sych, in: Symposium Cellular Metals and Polymers, Fürth, October 2004.Suche in Google Scholar

[23] D. Stoyan: Chinese J. Stereology and Image Analysis 7(2002) 1.Suche in Google Scholar

[24] H.E. Exner: Grundlagen von Sintervorgängen, Gebr. Borntreager, Berlin, Stuttgart, 1978.Suche in Google Scholar

[25] W. Schatt: Sintervorgänge. VDI-Verlag, Düsseldorf, 1992.Suche in Google Scholar

[26] M. Nöthe, K. Pischang, P. Ponižil, B. Kieback, in: V. Arnhold, C.-L. Chu, W.F. Jandeska, H.I. Sanderow (Eds.), Proc. of PM World Congress, Orlando (USA), June 16th –21st, volume 13, pp. 176–184, 2002.Suche in Google Scholar

[27] M. Nöthe, K. Pischang, P. Ponižil, B. Kieback, J. Ohser,in: J. Goebbels, U. Zscherpel (Eds.), Proc. of the International Symposium on Computed Tomography and Image Processing for Industrial Radiology, pp. 273–280, 2003.Suche in Google Scholar

[28] M. Nöthe, K. Pischang, P. Ponižil, B. Kieback, J. Ohser, in: Proc. World Congress PM2004 Powder Metallurgy, Vienna, October, 17th –21st, in print, 2004.Suche in Google Scholar
Received: 2004-10-18
Accepted: 2005-04-07
Published Online: 2022-02-16

© 2005 Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Frontmatter
  2. Editorial
  3. Heinrich Oettel – 65 Jahre
  4. Articles Basic
  5. Misorientations and geometrically necessary dislocations in deformed copper crystals: A microstructural analysis of X-ray rocking curves
  6. Microstructure and lattice defects in highly deformed metals by X-ray diffraction whole powder pattern modelling
  7. Magnetoplasticity
  8. Articles Applied
  9. Finite-element analysis of the hot-pressing consolidation of continuous Al2O3 fibers-reinforced NiAl composites
  10. Modelling the stress state of a thermal barrier coating system at high temperatures
  11. Impedance spectroscopy of thermal barrier coatings as non-destructive evaluation tool for failure detection
  12. Diffraction by image processing and its application in materials science
  13. On the preferred orientation in Ti1–xAlxN and Ti1–x–yAlxSiyN thin films
  14. Boron segregation and creep in ultra-fine grained tempered martensite ferritic steels
  15. Numeric simulation of the α/γ-phase ratio of ferritic-austenitic duplex steels
  16. Deformation behaviour and microscopic investigations of cyclically loaded railway wheels and tyres
  17. Similarity considerations on the simulation of turning processes of steels
  18. Crack-tip residual stresses and crack propagation in cyclically-loaded specimens under different loading modes
  19. On the effect of oxide scale stability on the internal nitridation process in high-temperature alloys
  20. Nitriding behaviour of the intermetallic alloy FeAl
  21. Material-related fundamentals of cutting techniques for GaAs wafer manufacturing
  22. Determination of RuAl phase boundaries in binary Ru–Al phase diagram at room temperature and 1200 °C
  23. On the Orowan stress in intermetallic ODS alloys and its superposition with grain size and solid solution hardening
  24. Effects of particle reinforcement on creep behaviour of AlSi1MgCu
  25. Effect of preaging on the precipitation behaviour of AlMgSi1
  26. Corrosion behaviour of hard coatings on Mg substrates
  27. Phase transformations in creep resistant MgYNdScMn alloy
  28. Notifications/Mitteilungen
  29. Personal/Personelles
  30. Press/Presse
  31. Conferences
https://doi.org/10.1515/ijmr-2005-0128
Schlagwörter für diesen Artikel
X-ray computer tomography (XCT); Image analysis; Fourier transform; Porous media; Sinter material

Artikel in diesem Heft

  1. Frontmatter
  2. Editorial
  3. Heinrich Oettel – 65 Jahre
  4. Articles Basic
  5. Misorientations and geometrically necessary dislocations in deformed copper crystals: A microstructural analysis of X-ray rocking curves
  6. Microstructure and lattice defects in highly deformed metals by X-ray diffraction whole powder pattern modelling
  7. Magnetoplasticity
  8. Articles Applied
  9. Finite-element analysis of the hot-pressing consolidation of continuous Al2O3 fibers-reinforced NiAl composites
  10. Modelling the stress state of a thermal barrier coating system at high temperatures
  11. Impedance spectroscopy of thermal barrier coatings as non-destructive evaluation tool for failure detection
  12. Diffraction by image processing and its application in materials science
  13. On the preferred orientation in Ti1–xAlxN and Ti1–x–yAlxSiyN thin films
  14. Boron segregation and creep in ultra-fine grained tempered martensite ferritic steels
  15. Numeric simulation of the α/γ-phase ratio of ferritic-austenitic duplex steels
  16. Deformation behaviour and microscopic investigations of cyclically loaded railway wheels and tyres
  17. Similarity considerations on the simulation of turning processes of steels
  18. Crack-tip residual stresses and crack propagation in cyclically-loaded specimens under different loading modes
  19. On the effect of oxide scale stability on the internal nitridation process in high-temperature alloys
  20. Nitriding behaviour of the intermetallic alloy FeAl
  21. Material-related fundamentals of cutting techniques for GaAs wafer manufacturing
  22. Determination of RuAl phase boundaries in binary Ru–Al phase diagram at room temperature and 1200 °C
  23. On the Orowan stress in intermetallic ODS alloys and its superposition with grain size and solid solution hardening
  24. Effects of particle reinforcement on creep behaviour of AlSi1MgCu
  25. Effect of preaging on the precipitation behaviour of AlMgSi1
  26. Corrosion behaviour of hard coatings on Mg substrates
  27. Phase transformations in creep resistant MgYNdScMn alloy
  28. Notifications/Mitteilungen
  29. Personal/Personelles
  30. Press/Presse
  31. Conferences
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 29.10.2025 von https://www.degruyterbrill.com/document/doi/10.1515/ijmr-2005-0128/html?lang=de
Button zum nach oben scrollen