Home Technology Characterization of the fcc/bcc orientation relationship by EBSD using pole figures and variants
Article
Licensed
Unlicensed Requires Authentication

Characterization of the fcc/bcc orientation relationship by EBSD using pole figures and variants

  • Gert Nolze EMAIL logo
Published/Copyright: February 8, 2022
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 95 Issue 9

Abstract

The orientation relationship (OR) between fcc and bcc lattices are described by crystallographic fundamentals using the example of Kurdjumov–Sachs (K–S) and Nishiyama–Wassermann (N–W). Complete pole figures containing all variants will be used to distinguish even between slightly different ORs. EBSD on iron meteorites and duplex steel has been used to analyse a large number of crystal orientations with regard to a high statistical significance and a high probability to capture all variants in a single measurement. It is shown that the use of fixed OR models like K–S, N–W, Bain, Pitsch, or Greninger–Troiano does not satisfacturally reflect the observed experimental pole distributions. It is not convenient to use high-indexed lattice planes and directions to describe the small deviations from the given models. The Euler subspace representation offers a readily comprehensible tool to get an idea about the characteristic of the experimentally detected OR.

Keywords: Orientation relationship; EBSD; Duplex steel; Iron meteorite; Pole figure
Dr. Gert Nolze Federal Institute for Materials Research and Testing, Lab. V.11 Unter den Eichen 87, D-12205 Berlin, Germany Tel.: +49 30 81043513 Fax: +49 30 8104 1517

References

[1] G. Kurdjumow, G. Sachs: Z. Phys. 64 (1930) 325.10.1007/BF01397346Search in Google Scholar

[2] Z. Nishiyama: Sci. Rep. Tohoku Imp. Univ. Tokio 23 (1934) 637.10.1148/23.5.637aSearch in Google Scholar

[3] G. Wassermann: Mitt. K.-Wilh.-Inst. Eisenforsch. 17 (1935) 149.Search in Google Scholar

[4] C.H. Shek, C. Dong, J.K.L. Lai, K.W. Wong: Metall. Mat. Trans. A 31 (2000) 15.10.1007/s11661-000-0047-9Search in Google Scholar

[5] J.F. Nie: Acta mater. 52 (2004) 795.10.1016/j.actamat.2003.10.019Search in Google Scholar

[6] Y. Gotoh, H. Fukuda: Surf. Sci. 223 (1989) 315.10.1016/0039-6028(89)90740-1Search in Google Scholar

[7] J.H. van der Merwe: Surf. Sci. 449 (2000) 151.10.1016/S0039-6028(99)01242-XSearch in Google Scholar

[8] Y. Gotoh, S. Entani, H. Kawanowa: Surf. Sci. 507–510 (2002) 401.10.1016/S0039-6028(02)01277-3Search in Google Scholar

[9] J.K. Chen, D. Farkas, W.T. Reynolds Jr.: Acta mater. 45 (1997) 4415.10.1016/S1359-6454(97)00159-6Search in Google Scholar

[10] Q. Liang, W.T. Reynolds: Metallurg. Mater. Trans. A 29 (1998) 2059.10.1007/s11661-998-0032-2Search in Google Scholar

[11] V.A. Teplov, G. L. Podchinenova, I.E. Podchinenov, T.K. Kondrashkina: Fiz. Met. Metalloved. 68 (1989) 854.10.1213/00000539-198906000-00043Search in Google Scholar

[12] K. Kadau, R. Meyer, P. Entel: Surf. Rev. Lett. 6 (1999) 35.10.1142/S0218625X9900007XSearch in Google Scholar

[13] Y.J. Lan, D.Z. Li, Y.Y. Li: Acta mater. 52 (2004) 1721.10.1016/j.actamat.2003.12.045Search in Google Scholar

[14] O. Hellwig, K. Theis-Bröhl, G. Wilhelmi, A. Stierle, H. Zabel: Surf. Sci. 398 (1998) 379.10.1016/S0039-6028(98)80043-5Search in Google Scholar

[15] H.J. Bunge, W. Weiss, H. Klein, L. Wcislak, U. Garbe, J.R. Schneider: J. Appl. Cryst. 36 (2003) 137.10.1107/S0021889802021386Search in Google Scholar

[16] G. Nolze, V. Geist: Cryst. Res. Technol. 39 (2004) 343.10.1002/crat.200310193Search in Google Scholar

[17] V. Randle: Microtexture determination and its application. The Institute of Materials, London (1992).Search in Google Scholar

[18] B.L. Adams, S.I. Wright, K. Kunze: Metallurg. Trans. A 24 (1993) 819.10.1007/BF02656503Search in Google Scholar

[19] A.J. Schwartz, M. Kumar: Electron Backscatter Diffraction in Materials Science. Kluver Academic Publishers Group, first edn. (2000).10.1007/978-1-4757-3205-4Search in Google Scholar

[20] V. Randle: The measurement of grain boundary geometry. Electron Microscopy in Materials Science. Institute of Physics Publishing, Bristol and Philadelphia (1993).Search in Google Scholar

[21] B. Gardiola, C. Esling, M. Humbert, K.-E. Hensger: Adv. Enging. Mater. 5 (2003) 583.10.1002/adem.200300389Search in Google Scholar

[22] S. Morito, H. Tanaka, R. Konishi, T. Furuhara, T. Maki: Acta mater. 51 (2003) 1789.10.1016/S1359-6454(02)00577-3Search in Google Scholar

[23] M. G. Glavicic, P.A. Kobryn, T.R. Bieler, S.L. Semiatin: Mater. Sci. Engin. A 346 (2003) 50.10.1016/S0921-5093(02)00535-XSearch in Google Scholar

[24] G.G.E. Seward, S. Celotto, D.J. Prior, J.Wheeler, R.C. Pond: Acta mater. 52 (2004) 821.10.1016/j.actamat.2003.10.049Search in Google Scholar

[25] W. Pitsch: Arch. Eisenhüttenw. 38 (1967) 853.10.1002/srin.196704261Search in Google Scholar

[26] H. Schumann: Kristallgeometrie – Einführung in die Theorie der Gittertransformationen metallischer Werkstoffe. VEB Deutscher Verlag für Grundstoffindustrie, Leipzig (1979).Search in Google Scholar

[27] U. Dahmen: Acta metall. 30 (1982) 63.10.1016/0001-6160(82)90045-1Search in Google Scholar

[28] H.K.D.H. Bhadeshia: Worked Examples in the Geometry of Crystals. Institute of Metals, London, 2 edn. (2001).Search in Google Scholar

[29] V. Randle, O. Engler: Introduction to texture analysis: macrotexture, microtexture and orientation mapping. Gordon and Breach Science Publishers, Singapore (2000).10.1201/9781482287479Search in Google Scholar

[30] T. Sakata, H.Y. Yasuda, Y. Umakoshi: Scripta mater. 43 (2000) 411.10.1016/S1359-6462(00)00438-3Search in Google Scholar

[31] B. Verlinden, P. Bocher, E. Girault, E. Aernoudt: Scripta mater. 45 (2001) 909.10.1016/S1359-6462(01)01110-1Search in Google Scholar

[32] G. Miyamoto, T. Shinyoshi, J. Yamaguchi, T. Furuhara, T. Maki, R. Uemori: Scripta mater. 48 (2003) 371.10.1016/S1359-6462(02)00451-7Search in Google Scholar

[33] C.P. Luo, G. C. Weatherly: Acta metall. 35 (1987) 1963.10.1016/0001-6160(87)90025-3Search in Google Scholar

[34] K. Ameyama, G.C. Weatherly, K.T. Aust: Acta metall. mater. 40 (1992) 1835.10.1016/0956-7151(92)90170-JSearch in Google Scholar

[35] H. Zhang, L.L. He, H.Q. Ye, D.Y. Seo: Scripta mater. 48 (2003) 1231.10.1016/S1359-6462(03)00075-7Search in Google Scholar

[36] H.J. Bunge: Texture Analysis in Materials Science. Mathematical Methods. Butterworths, London (1982).10.1016/B978-0-408-10642-9.50019-2Search in Google Scholar

[37] H.J. Bunge, L. Wcislak, H. Klein, U. Garbe, J.R. Schneider: Adv. Eng. Mater. 4 (2002) 300.10.1002/1527-2648(20020503)4:5<300::AID-ADEM300>3.0.CO;2-QSearch in Google Scholar

[38] A.B. Greninger, A.R. Troiano: J. Met. Trans. 185 (1949) 590.10.1007/BF03398900Search in Google Scholar

[39] M.-X. Zhang, P.M. Kelly: Scripta mater. 47 (2002) 749.10.1016/S1359-6462(02)00196-3Search in Google Scholar

[40] R. C. Ecob: J. Microscopy 137 (1985) 313.10.1111/j.1365-2818.1985.tb02588.xSearch in Google Scholar

[41] F. Ye, W.-Z. Zhang: Acta mater. 50 (2002) 2761.10.1016/S1359-6454(02)00077-0Search in Google Scholar

[42] W.-Z. Zhang, F. Ye, C. Zhang, Y. Qi, H.-S. Fang: Acta mater. 48 (2000) 2209.10.1016/S1359-6454(00)00033-1Search in Google Scholar

[43] G. Brückner, J. Pospiech, I. Seidl, G. Gottstein: Scripta mater. 44 (2001) 2635.10.1016/S1359-6462(01)00956-3Search in Google Scholar

[44] S. Höfler, G.Will, H.-M. Hamm: Earth. Planet. Sci. Let. 90 (1988) 1.10.1016/0012-821X(88)90106-9Search in Google Scholar
Received: 2004-04-22
Accepted: 2004-07-08
Published Online: 2022-02-08

© 2004 Carl Hanser Verlag, München

Articles in the same Issue

  1. Frontmatter
  2. Editorial
  3. Editorial
  4. 85 Years DGM
  5. Fachausschuss ,,Materialographie“
  6. Fachausschuss ,,Mechanische Oberflächenbehandlungen“
  7. Fachausschuss „Titan“
  8. Fachausschuss ,,Gefüge und Eigenschaften von Polymerwerkstoffen“
  9. Characterization of the fcc/bcc orientation relationship by EBSD using pole figures and variants
  10. Microstructural and thermodynamic study of γ-Ga2O3
  11. Spray forming of 2014-Al alloy based composites with injection of SiC particulates
  12. Size effects in the plastic deformation of NiAl thin films
  13. Fracture parameters of chevron-notched Al2O3/Nb sandwich specimens
  14. HVEM in situ study of fracture of Al2O3/Nb sandwich specimens
  15. Articles Basic
  16. Assessment of thermodynamic functions in the MgO–Al2O3–SiO2 system
  17. Derivation and consistency of the partial functions of a ternary system involving interaction coefficients
  18. Contribution to the zinc-rich side of the Ti–Zn system
  19. Measurement of the surface tension of liquid Ga, Bi, Sn, In and Pb by the constrained drop method
  20. Articles Applied
  21. Model of growth kinetics of nitrided layer in the binary Fe–N system
  22. Einfluss von Molybdän auf die Beständigkeit von Stahlanoden zum Verchromen in „Chromispel-C“-Elektrolyten
  23. The mechanism of columnar-to-equiaxed transition during electromagnetic centrifugal solidification
  24. Notifications/Mitteilungen
  25. Personal/Personelles
  26. News/Aktuelles
  27. Books/Bücher
  28. Conferences/Konferenzen
https://doi.org/10.1515/ijmr-2004-0142
Keywords for this article
Orientation relationship; EBSD; Duplex steel; Iron meteorite; Pole figure

Articles in the same Issue

  1. Frontmatter
  2. Editorial
  3. Editorial
  4. 85 Years DGM
  5. Fachausschuss ,,Materialographie“
  6. Fachausschuss ,,Mechanische Oberflächenbehandlungen“
  7. Fachausschuss „Titan“
  8. Fachausschuss ,,Gefüge und Eigenschaften von Polymerwerkstoffen“
  9. Characterization of the fcc/bcc orientation relationship by EBSD using pole figures and variants
  10. Microstructural and thermodynamic study of γ-Ga2O3
  11. Spray forming of 2014-Al alloy based composites with injection of SiC particulates
  12. Size effects in the plastic deformation of NiAl thin films
  13. Fracture parameters of chevron-notched Al2O3/Nb sandwich specimens
  14. HVEM in situ study of fracture of Al2O3/Nb sandwich specimens
  15. Articles Basic
  16. Assessment of thermodynamic functions in the MgO–Al2O3–SiO2 system
  17. Derivation and consistency of the partial functions of a ternary system involving interaction coefficients
  18. Contribution to the zinc-rich side of the Ti–Zn system
  19. Measurement of the surface tension of liquid Ga, Bi, Sn, In and Pb by the constrained drop method
  20. Articles Applied
  21. Model of growth kinetics of nitrided layer in the binary Fe–N system
  22. Einfluss von Molybdän auf die Beständigkeit von Stahlanoden zum Verchromen in „Chromispel-C“-Elektrolyten
  23. The mechanism of columnar-to-equiaxed transition during electromagnetic centrifugal solidification
  24. Notifications/Mitteilungen
  25. Personal/Personelles
  26. News/Aktuelles
  27. Books/Bücher
  28. Conferences/Konferenzen
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Winner of the OpenAthens UX Award 2026
Winner of the OpenAthens UX Award 2026
Have an idea on how to improve our website?
Please write us.
© 2026 De Gruyter Brill
Downloaded on 8.3.2026 from https://www.degruyterbrill.com/document/doi/10.1515/ijmr-2004-0142/html
Scroll to top button