Thermodynamic Optimization of the Cr-Ti System

W. Zhuang; J. Shen; Y. Liu; L. Ling; Sh. Shang; Y. Du; C. Schuster

doi:10.1515/ijmr-2000-910203

Startseite Thermodynamic Optimization of the Cr-Ti System

Artikel

Lizenziert

Nicht lizenziert Erfordert eine Authentifizierung

Thermodynamic Optimization of the Cr-Ti System

W. Zhuang , J. Shen , Y. Liu , L. Ling , Sh. Shang , Y. Du und C. Schuster

Veröffentlicht/Copyright: 8. März 2024

Veröffentlicht von

Veröffentlichen auch Sie bei De Gruyter Brill

Informationen für Autor*innen

Aus der Zeitschrift International Journal of Materials Research Band 91 Heft 2

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Zhuang, W., Shen, J., Liu, Y., Ling, L., Shang, Sh., Du, Y. and Schuster, C.. "Thermodynamic Optimization of the Cr-Ti System" International Journal of Materials Research, vol. 91, no. 2, 2000, pp. 121-127. https://doi.org/10.1515/ijmr-2000-910203

Zhuang, W., Shen, J., Liu, Y., Ling, L., Shang, S., Du, Y. & Schuster, C. (2000). Thermodynamic Optimization of the Cr-Ti System. International Journal of Materials Research, 91(2), 121-127. https://doi.org/10.1515/ijmr-2000-910203

Zhuang, W., Shen, J., Liu, Y., Ling, L., Shang, S., Du, Y. and Schuster, C. (2000) Thermodynamic Optimization of the Cr-Ti System. International Journal of Materials Research, Vol. 91 (Issue 2), pp. 121-127. https://doi.org/10.1515/ijmr-2000-910203

Zhuang, W., Shen, J., Liu, Y., Ling, L., Shang, Sh., Du, Y. and Schuster, C.. "Thermodynamic Optimization of the Cr-Ti System" International Journal of Materials Research 91, no. 2 (2000): 121-127. https://doi.org/10.1515/ijmr-2000-910203

Zhuang W, Shen J, Liu Y, Ling L, Shang S, Du Y, Schuster C. Thermodynamic Optimization of the Cr-Ti System. International Journal of Materials Research. 2000;91(2): 121-127. https://doi.org/10.1515/ijmr-2000-910203

Kopie

In die Zwischenablage kopiert

BibTeX EndNote RIS

Published Online: 2024-03-08

Published in Print: 2000-02-01

Sie haben derzeit keinen Zugang zu diesem Inhalt.

Artikel in diesem Heft

INHALT
Aufsätze
Thermodynamical Calculation of Martensite Start Temperatures in the System FeCrMnNiC
Thermodynamic Assessment of the Fe-C-P System
Thermodynamic Optimization of the Cr-Ti System
Enthalpy of Mixing of Liquid Cu-Ni-Si Alloys
Thermodynamic Properties of Liquid Copper-rich Cu-Pb-Fe Alloys Determined by Vapour Pressure Measurements
Structure Inhomogeneity of Rolled Textured Niobium
Phase Transformations of Al-Fe and Al-Fe-Zr Rapidly Solidified Alloys
Evidence for Near-Grain Boundary Lattice Rotations in an Fe(Si) Alloy
Study of Hyperfine Field Distributions in the Alloy Fe₅₄Ni₂₆Cr₂₀ by using ⁵⁷Fe Mössbauer Spectroscopic Technique
Modified Austempering Effect on Tensile Properties of Fe-0.2C-1.5Si-1.0Mn Steel
Microstructure and Wear Characteristics of Al-Si Alloys Reinforced with SiC Particles
Mitteilungen der Deutschen Gesellschaft für Materialkunde e. V.
Personen
Impressum

Zeitschrift durchsuchen In dieser Zeitschrift suchen

https://doi.org/10.1515/ijmr-2000-910203

Artikel in diesem Heft

INHALT
Aufsätze
Thermodynamical Calculation of Martensite Start Temperatures in the System FeCrMnNiC
Thermodynamic Assessment of the Fe-C-P System
Thermodynamic Optimization of the Cr-Ti System
Enthalpy of Mixing of Liquid Cu-Ni-Si Alloys
Thermodynamic Properties of Liquid Copper-rich Cu-Pb-Fe Alloys Determined by Vapour Pressure Measurements
Structure Inhomogeneity of Rolled Textured Niobium
Phase Transformations of Al-Fe and Al-Fe-Zr Rapidly Solidified Alloys
Evidence for Near-Grain Boundary Lattice Rotations in an Fe(Si) Alloy
Study of Hyperfine Field Distributions in the Alloy Fe₅₄Ni₂₆Cr₂₀ by using ⁵⁷Fe Mössbauer Spectroscopic Technique
Modified Austempering Effect on Tensile Properties of Fe-0.2C-1.5Si-1.0Mn Steel
Microstructure and Wear Characteristics of Al-Si Alloys Reinforced with SiC Particles
Mitteilungen der Deutschen Gesellschaft für Materialkunde e. V.
Personen
Impressum