Microstructure and Wear Characteristics of Al-Si Alloys Reinforced with SiC Particles

Articles in the same Issue

1. INHALT
2. Aufsätze
3. Thermodynamical Calculation of Martensite Start Temperatures in the System FeCrMnNiC
4. Thermodynamic Assessment of the Fe-C-P System
5. Thermodynamic Optimization of the Cr-Ti System
6. Enthalpy of Mixing of Liquid Cu-Ni-Si Alloys
7. Thermodynamic Properties of Liquid Copper-rich Cu-Pb-Fe Alloys Determined by Vapour Pressure Measurements
8. Structure Inhomogeneity of Rolled Textured Niobium
9. Phase Transformations of Al-Fe and Al-Fe-Zr Rapidly Solidified Alloys
10. Evidence for Near-Grain Boundary Lattice Rotations in an Fe(Si) Alloy
11. Study of Hyperfine Field Distributions in the Alloy Fe₅₄Ni₂₆Cr₂₀ by using ⁵⁷Fe Mössbauer Spectroscopic Technique
12. Modified Austempering Effect on Tensile Properties of Fe-0.2C-1.5Si-1.0Mn Steel
13. Microstructure and Wear Characteristics of Al-Si Alloys Reinforced with SiC Particles
14. Mitteilungen der Deutschen Gesellschaft für Materialkunde e. V.
15. Personen
16. Impressum