Article
Licensed
Unlicensed
Requires Authentication
Structure Inhomogeneity of Rolled Textured Niobium
-
Y. Perlovich
Published/Copyright:
March 8, 2024
Published Online: 2024-03-08
Published in Print: 2000-02-01
© 2024 by Walter de Gruyter Berlin/Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- INHALT
- Aufsätze
- Thermodynamical Calculation of Martensite Start Temperatures in the System FeCrMnNiC
- Thermodynamic Assessment of the Fe-C-P System
- Thermodynamic Optimization of the Cr-Ti System
- Enthalpy of Mixing of Liquid Cu-Ni-Si Alloys
- Thermodynamic Properties of Liquid Copper-rich Cu-Pb-Fe Alloys Determined by Vapour Pressure Measurements
- Structure Inhomogeneity of Rolled Textured Niobium
- Phase Transformations of Al-Fe and Al-Fe-Zr Rapidly Solidified Alloys
- Evidence for Near-Grain Boundary Lattice Rotations in an Fe(Si) Alloy
- Study of Hyperfine Field Distributions in the Alloy Fe54Ni26Cr20 by using 57Fe Mössbauer Spectroscopic Technique
- Modified Austempering Effect on Tensile Properties of Fe-0.2C-1.5Si-1.0Mn Steel
- Microstructure and Wear Characteristics of Al-Si Alloys Reinforced with SiC Particles
- Mitteilungen der Deutschen Gesellschaft für Materialkunde e. V.
- Personen
- Impressum
Articles in the same Issue
- INHALT
- Aufsätze
- Thermodynamical Calculation of Martensite Start Temperatures in the System FeCrMnNiC
- Thermodynamic Assessment of the Fe-C-P System
- Thermodynamic Optimization of the Cr-Ti System
- Enthalpy of Mixing of Liquid Cu-Ni-Si Alloys
- Thermodynamic Properties of Liquid Copper-rich Cu-Pb-Fe Alloys Determined by Vapour Pressure Measurements
- Structure Inhomogeneity of Rolled Textured Niobium
- Phase Transformations of Al-Fe and Al-Fe-Zr Rapidly Solidified Alloys
- Evidence for Near-Grain Boundary Lattice Rotations in an Fe(Si) Alloy
- Study of Hyperfine Field Distributions in the Alloy Fe54Ni26Cr20 by using 57Fe Mössbauer Spectroscopic Technique
- Modified Austempering Effect on Tensile Properties of Fe-0.2C-1.5Si-1.0Mn Steel
- Microstructure and Wear Characteristics of Al-Si Alloys Reinforced with SiC Particles
- Mitteilungen der Deutschen Gesellschaft für Materialkunde e. V.
- Personen
- Impressum