Mathematical Modeling of Ethane Cracking Furnace of Olefin Plant with Coke Formation Approach

References

Albright, L.F., and J.C. Marek. 1988. “Coke formation during pyrolysis: roles of residence time, reactor geometry, and time of operation.” Industrial Engineering Chemical Researcher 27 (5): 743–51.10.1021/ie00077a004Search in Google Scholar

Belohlav, Zdenek, Petr Zamostny, and Tomas Herink. 2003. “The Kinetic Model of Thermal Cracking for Olefâins Production.” Chemical Engineering and Processing 42: 461–73.10.1016/S0255-2701(02)00062-4Search in Google Scholar

Cai, H., A. Krzywicki, and M.C. Oballa. 2002. “Coke Formation in Steam Crackers for Ethylene Production.” Chemical Engineering and Processing 41: 199–214.10.1016/S0255-2701(01)00135-0Search in Google Scholar

Froment, G.F.. 1992. “Kinetics and Reactor Designer the Thermal Cracking for Olefins Production.” Chemical Engineering Science 47 (9-l i): 2163–77.10.1016/0009-2509(92)87033-MSearch in Google Scholar

Gal, T., and B.G. Lakatos. 2004. “Modeling and Simulation of Steam Crackers.” European Symposium on Computer-Aided Process Engineering- 14–200410.1016/S1570-7946(04)80175-5Search in Google Scholar

Ghasemi, H., N. Gilani, and J. Daryan. 2016. “CFD Simulation of Propane Thermal Cracking Furnace and Reactor: A Case Study.” International Journal of Chemical Reactor Engineering 15 (3) Retrieved December 13, 2017. doi:10.1515/ijcre-2016-0125.Search in Google Scholar

Karamullaoglu, G., and T. Dogu. 2007. “Dynamic and Steady State Analysis of Low Temperature Ethane Oxidative Dehydrogenation over Chromia and Chromia-Vanadia Catalysts.” International Journal of Chemical Reactor Engineering 5 (1): Retrieved December 13, 2017. doi:10.2202/1542-6580.1513.Search in Google Scholar

Keyvanloo, K., M. Sedighi, and J. Towfâighi. 2012. “Genetic Algorithm Model Development for Prediction of Main Products in Thermal Cracking of Naphtha: Comparison with Kinetic Modeling.” Chemical Engineering Journal 209: 255–62.10.1016/j.cej.2012.07.130Search in Google Scholar

Kopinke, F.D., G. Zimmermann, and S. Nowak. 1988. “On the Mechanism of Coke Formation in Steam Cracking-Conclusions from Results Obtained by Tracer Experiments.” Carbon 26 (2): 117–124.10.1016/0008-6223(88)90027-9Search in Google Scholar

Lahaye, J., P. Badie, and J. Ducret. 1977. “Mechanism of carbon formation during steamcracking of hydrocarbons.” Carbon 15: 87.10.1016/0008-6223(77)90022-7Search in Google Scholar

Mackenzie, Allan l., Philip D. Pacey, and Jayantha H. Wimalase. 1983. “Induction Periods in the Formation of Ethane from the Pyrolysis of Ethylene.” Canada Journal Chemical 61 (9): 2033–2036.10.1139/v83-351Search in Google Scholar

Manafzadeh, H., S.M. Sadrameli, and J. Towfâighi. 2003. “Coke Deposition by Physical Condensation of Poly-Cyclic Hydrocarbons in the Transfer Line exchanger(TLX) of Olefâin Plant.” Applied Thermal Engineering 23: 1347–58.10.1016/S1359-4311(03)00088-7Search in Google Scholar

Masoumi, M.E., S.M. Sadrameli, J. Towfâighi, and A. Niaei. 2006. “Simulation, Optimization and Control of a Thermal Cracking Furnace.” Energy 31: 516–27.10.1016/j.energy.2005.04.005Search in Google Scholar

Alizadeh, Mohammad, J. Towfâighi, and R. Karimzadeh. 2008. “Modeling of Catalytic Coke Formation in Thermal Cracking Reactors.” Journal Analysis Applications Pyrolysis 82: 134–39.10.1016/j.jaap.2008.02.006Search in Google Scholar

Nabavi, R., Rangaiah, G.P., Niaei, A., Salari, D. 2011 (December) 13. “Design Optimization of an LPG Thermal Cracker for Multiple Objectives.” International Journal of Chemical Reactor Engineering 9 (1). Retrieved December132017. DOI: 10.1515/1542-6580.2507.Search in Google Scholar

Niaei, A., J. Towfâighi, S.M. Sadrameli, and R. Karimzadeh. 2004. “The Combined Simulation of Heat Transfer and Pyrolysis Reactions in Industrial Cracking Furnaces.” Applied Thermal Engineering 24: 2251–65.10.1016/j.applthermaleng.2004.01.016Search in Google Scholar

Norinaga, K., and O. Deutschmann. 2007. “Detailed Kinetic Modeling of Gas-Phase Reactions in the Chemical Vapor Deposition of Carbon from Light Hydrocarbons.” Industrial Engineering Chemical Researcher 46: 3547–57.10.1021/ie061207pSearch in Google Scholar

Norinaga, K., O. Deutschmann, N. Saegusa, and J. Hayashi. 2009. “Analysis of Pyrolysis Products from Light Hydrocarbons and Kinetic Modeling for Growth of Polycyclic Aromatic Hydrocarbons with Detailed Chemistry.” Journal Analysis Applications Pyrolysis 86: 148–60.10.1016/j.jaap.2009.05.001Search in Google Scholar

Norinaga, K., V. Janardhanan, and O. Deutschmann. 2007. “Detailed Chemical Kinetic Modeling of Pyrolysis of Ethylene, Acetylene, and Propylene at 1073–1373 K with a Plug-Flow Reactor Model.” Wiley Interscience. doi:10.1002/kin.20302.Search in Google Scholar

Perry, R.H., and D.W. Green. 1997. Perry’s Chemical Engineering Handbook,, 411. New York: McGraw-HillSearch in Google Scholar

Rahimpour, M.R., O. Dehghani, M.R. Gholipour, M.S. ShokrollahiYancheshmeh, S.S. Haghighi, and S. Raeissi. 2013. “Modeling of Ethane Pyrolysis Process: A Study on Effects of Steam and Carbon Dioxide on Ethylene and Hydrogen Productions.” Chemical Engineering Journal 215–216: 550–60.10.1016/j.cej.2012.10.078Search in Google Scholar

Ramanarao, M. V., P.M. Plehiers, and G.F. Froment. 1988. “The Coupled Simulation of Heat Transfer and Reaction in a Pyrolysis Furnace.” Chemical Engineering Science 43 (6): 1223–29.10.1016/0009-2509(88)85093-0Search in Google Scholar

Rase, H.F. 1977. Chemical Reactor Design for Process Plants: Case Study 102,. Vol. 2. New York: John Wiley and SonsSearch in Google Scholar

Sadrameli, S.M., and A.E.S. Green. 2005. “Systematics and Modeling Representations of Naphtha Thermal Cracking for Olefâin Production.” Journal Analysis Applications Pyrolysis 73: 305–13.10.1016/j.jaap.2005.02.008Search in Google Scholar

Simon, M., and M.H. Back. 1969. “Kinetics of the Thermal Reactions of Ethylene.” Canadian Journal of Chemistry 47: 251.10.1139/v69-035Search in Google Scholar

Sundaram, K.M., and G.F. Froment. 1977. “Modeling of Thermal Cracking kinetics—I: Thermal Cracking of Ethane, Propane and Their Mixtures.” Chemical Engineering Sciences 32: 601–08.10.1016/0009-2509(77)80225-XSearch in Google Scholar

Sundaram, K.M., and G.F. Froment. 1980. “Two Dimensional Model for the Simulation of Tubular Reactors for Thermal Cracking.” Chemical Engineering Science 35: 364–71.10.1016/0009-2509(80)80108-4Search in Google Scholar

Technip Operating Manual. July 2003. Rev. : 1, Chapter : 3, Page : 6.Search in Google Scholar

Towfighi, J., J. Modarres, and M. Omidkhah. 2004. “Estimation of Kinetic Parameters of Coking Reaction Rate in Pyrolysis of Naphtha.” IJE Transactions B:Applications 17, no. 4 (December2004): 319.Search in Google Scholar

Zarinabadi, S., E. Ziarifar, M. SadeghMarouf, and A. Samimi. “Modeling and Simulation for Olefin Production in Amir Kabir Petrochemical.” In Proceedings of the World Congress on Engineering and Computer Science 2010, Vol. IISearch in Google Scholar

Zou, R., Q. Lou, S. Mo, and S. Feng. 1993. “Study on a Kinetic Model of Atmospheric Gas Oil Pyrolysis and Coke Deposition.” Industrial Engineering Chemical Researcher 32: 843–47.10.1021/ie00017a011Search in Google Scholar