Frontmatter

Home Frontmatter

Article Publicly Available

Published/Copyright: July 25, 2018

Published by

Become an author with De Gruyter Brill

Submit Manuscript Author Information

"Frontmatter" High Temperature Materials and Processes, vol. 37, no. 7, 2018, pp. i-iii. https://doi.org/10.1515/htmp-2018-frontmatter7

(2018). Frontmatter. High Temperature Materials and Processes, 37(7), i-iii. https://doi.org/10.1515/htmp-2018-frontmatter7

(2018) Frontmatter. High Temperature Materials and Processes, Vol. 37 (Issue 7), pp. i-iii. https://doi.org/10.1515/htmp-2018-frontmatter7

"Frontmatter" High Temperature Materials and Processes 37, no. 7 (2018): i-iii. https://doi.org/10.1515/htmp-2018-frontmatter7

Frontmatter. High Temperature Materials and Processes. 2018;37(7): i-iii. https://doi.org/10.1515/htmp-2018-frontmatter7

Copied to clipboard

Published Online: 2018-07-25

Published in Print: 2018-07-24

Articles in the same Issue

Frontmatter
Research Article
Effect of Multidirectional Forging and Heat Treatment on Mechanical Properties of In Situ ZrB_2p/6061Al Composites
Short Communication
Obtaining Ceramic Materials from Hydroxyapatite Using Spark-Plasma Sintering
Research Articles
An Investigation of Wear Behaviors of AA7075 Al Hybrid Composites
Dephosphorization by Double-Slag Process in Converter Steelmaking
Simulation of Dynamic Recrystallization Behavior under Hot Isothermal Compressions for as-extruded 3Cr20Ni10W2 Heat-Resistant Alloy by Cellular Automaton Model
Post-weld Heat Treatment and Groove Angles Affect the Mechanical Properties of T92/Super 304H Dissimilar Steel Weld Joints
Distribution of P₂O₅ between P-rich Phase and Matrix Phase in P-bearing Steelmaking Slag
Mass-Transfer Model for Steel, Slag, and Inclusions during Ladle-Furnace Refining
Repair Welding of the Tunnel Defect in Friction Stir Weld
The Interface Reaction between Titanium and Iron-Nickel alloys
Microstructure and Mechanical Properties of Friction Stir Processed A356 Cast Al under Air Cooling and Water Cooling

Search journal Search the content of this journal

Frontmatter
Research Article
Effect of Multidirectional Forging and Heat Treatment on Mechanical Properties of In Situ ZrB_2p/6061Al Composites
Short Communication
Obtaining Ceramic Materials from Hydroxyapatite Using Spark-Plasma Sintering
Research Articles
An Investigation of Wear Behaviors of AA7075 Al Hybrid Composites
Dephosphorization by Double-Slag Process in Converter Steelmaking
Simulation of Dynamic Recrystallization Behavior under Hot Isothermal Compressions for as-extruded 3Cr20Ni10W2 Heat-Resistant Alloy by Cellular Automaton Model
Post-weld Heat Treatment and Groove Angles Affect the Mechanical Properties of T92/Super 304H Dissimilar Steel Weld Joints
Distribution of P₂O₅ between P-rich Phase and Matrix Phase in P-bearing Steelmaking Slag
Mass-Transfer Model for Steel, Slag, and Inclusions during Ladle-Furnace Refining
Repair Welding of the Tunnel Defect in Friction Stir Weld
The Interface Reaction between Titanium and Iron-Nickel alloys
Microstructure and Mechanical Properties of Friction Stir Processed A356 Cast Al under Air Cooling and Water Cooling